两指标随机过程的停止

~~(2 ) z∈ R+ 2 ,{z∈ D′{ D相似文献   

高精度步进压印机热误差的建模分析

为了消除由紫外光曝光所引起的步进压印机的热误差，以提高压印机的套刻对准精度，运用逐步回归分析法选取了压印机上温度测量点的数量，将压印机上布置的温度传感器从15个减少到6个，并建立了压印机温度测量关键点处的温度与压头在x、z方向热误差关系的数学模型．实验结果与模型计算结果的对比分析表明，模型的热误差预测精度在x方向可以达到899／6，而在z方向可以达到939／6．应用表明，该方法是一种在压印机热误差建模中选择温度测量关键点的有效方法，可避免热误差建模过程中的变量耦合问题，从而提高了模型的精确性．     

WHOLLY-AROMATIC COPOLYESTERS CONTAINING IPA, 2.6-NDA, TPA, CLHQA AND PABA MONOMERS

The crystallinities, thermal properties, liquid crystal properties and rheologic properties oftwo series of the aromatic copolyesters are studied. One of them is composed of IPA, 2,6-NDA,CLHQA, PABA and. the other composed of TPA, 2.6-NDA, CLHQA, IPA. The results showthat the crystallinities of the aromatic copolyesters are relatively low and the melting point of thecopolyesters decreases with an increase of the unsymmetrical contents. These two series of aro-matic copolyesters are both suitable for the conventional melt spinning process and have a goodfiber forming property and a good thermal stability. The viscosities of aromatic copolyestermelts are greatly affected by the shear rate, hence the so-called" thinning under shearing" phe-nomenon. The melts have a rather high viscosity flow activation energy and a relatively lowelasticity.     

须从抬头不良对精梳质量的影响

本文通过高速摄影,拍摄到钳板开启后须丛头回挺的全过程,从而获得须丛抬头所需时间须丛移的变化规律。鉴于现有精梳机存在须头不良问题,本文还对受须丛抬头不良干扰的分离丛进行了理论分析,得出精梳棉网“鱼鳞斑”是须丛抬头不良所致。这些研究工作为棉纺精梳机的设计和调试提供了重要依据。     

Structure of the human CLC-7/Ostm1 complex reveals a novel state

CLC-7 functions as a Cl?/H+ exchanger in lysosomes. Defects in CLC-7 and its β-subunit, Ostm1, result in osteopetrosis and neurodegeneration. Here, we present the cryogenic electron microscopy (cryo-EM) structure of the human CLC-7/Ostm1 complex (HsCLC-7/Ostm1) at a resolution of 3.6 ?. Our structure reveals a new state of the CLC-7/Ostm1 heterotetramer, in which the cytoplasmic domain of CLC-7 is absent, likely due to high flexibility. The disordered cytoplasmic domain is probably not able to restrain CLC-7 subunits and thus allow their relative movements. The movements result in an approximately half smaller interface between the CLC-7 transmembrane domains than that in a previously reported CLC-7/Ostm1 structure with a well-folded cytoplasmic domain. Key interactions involving multiple osteopetrosis-related residues are affected by the interface change.     

建设项目随机离散型工期-成本优化算法的改进

针对建设项目随机离散型工期-成本优化问题的求解,一般采用遗传算法为外循环、蒙特卡罗模拟算法为内循环的双层循环算法框架. 为减少内层循环中按期完工概率约束条件检验所耗费的计算资源,根据按期完工概率估计值（采用蒙特卡罗模拟方法）的概率特性,提出一种计算资源的高效、动态分配策略,以提升现有算法的计算效率. 通过算例验证,本文建议的改进优化算法可高效、稳定地求解建设项目随机离散型工期-成本优化问题.     

方幂和中因子5的指数问题

设ｎ,ｘ,ｒ是正整数且ｒ＞１,ｎ＝５αｃ,５ｃ,给出方幂和中因子５的指数计算公式：Ｄ＝∑ｎ－１ｋ＝０（ｘ＋ｄｋ）ｒ,ｄ＝５ｓ＋１,ｓ≥０．     

冷热兼供热泵空调器的性能模拟与分析

针对冷热兼供热泵空调器的特点,建立了冷热兼供热泵空调器稳态运行的数学模型,对该系统进行了较全面的模拟分析,并将模拟结果和实验数据进行了比较,两者吻合良好．同时应用该软件对不同设备参数和不同工况下性能进行分析,得到若干有用的结果．     

Kinetic model for the smectite to illite transformation in active geothermal systems

The smectite to illite transformation in active geothermal systems of New Zealand can be simulated by a first-order reaction kinetic model, which provides direct estimates about the minumum ages of active geothermal systems themselves. The derived kinetic values show that the smectite to illite transformation is sensitive to both temperature and time.     

酚醛树脂泡沫材料的填充改性及其性能研究

用氢氧化铝粉末对泡沫酚醛树脂材料进行填充改性,并对其主要性能进行研究．结果表明,填充改性能提高酚醛泡沫材料的抗压强度,其导热系数随温度和密度的升高而增大,泡沫材料在深冷情况下表现出优异的绝热性能．同时对酚醛泡沫材料的燃烧性能进行了考察,其临界氧指数高达４７,在高于１５０℃环境温度中有自燃的危险,１５０℃以下可安全使用．