富铬啤酒酵母发酵条件的优化

通过对啤酒酵母富铬发酵条件（发酵培养基配方,发酵时间,发酵温度,接种量,培养基装量）的探讨,得到了富铬啤酒酵母发酵的最佳工艺条件,即：（１）发酵培养基配方：葡萄糖１％、酵母膏０．３％、蛋白胨１．０５％、ＫＨ２ＰＯ４０．１％、ＭｇＳＯ４７Ｈ２Ｏ０．１％、（ＮＨ４）２ＳＯ４０．１％、Ｃｒ３＋浓度０．０２ｇ／Ｌ、ｐＨ值５．１;（２）最佳吸收时间：发酵４８ｈ．（３）发酵温度：２８℃;（４）接种量：１０％;（５）培养基装量：５０ｍＬ．     

黑曲霉发酵玉米淀粉生产柠檬酸

用紫外线和亚硝基胍诱变相结合的方法,从野生黑曲霉菌株出发,经多次诱变筛选,得到一株能够较好地利用玉米淀粉生产柠檬酸的黑曲霉菌株Ａ．ｎｉｇｅｒ９５。对Ａ．ｎｉｇｅｒ９５在摇瓶和发酵罐上用玉米淀粉发酵产生柠檬酸的适宜条件作了详细研究。经过比较,认为摇瓶产生柠檬酸的适宜培养基配方及发酵条件为：玉米淀粉２０％（均为质量分数,下同）、（ＮＨ４）ＳＯ４０．２％、ＫＨ２ＰＯ４０．２％、ＭｇＳＯ４７Ｈ２Ｏ０．０５％,甲醇３％,初始ｐＨ３．０。接种液体种子５％,３０℃２００ｒ／ｍｉｎ发酵７ｄ,柠檬酸产量１０．８％。在６．６Ｌ的Ｂｉｏｆｌｏ－Ⅱ型发酵罐上设定３０℃,５００～６００ｒ／ｍｉｎ,ｐＨ４．０,１．２～２．５Ｌ／ｍｉｎ的通气量,发酵１３２ｈ,柠檬酸产量为９．３％。可用价格低廉、来源丰富的玉米淀粉代替传统的薯干,作为发酵生产柠檬酸的原料,为实际生产奠定了基础。     

Cl~- 和 SO_4~(2-) 对厌氧废水处理的抑制阈值

用人工配制高浓度有机废水分别研究了Ｃｌ－和ＳＯ２－４对厌氧生物废水处理的抑制作用和抑制阈值．在全混流厌氧恒化器和上流式厌氧污泥床（ＵＡＳＢ）反应器中分别得到了对厌氧消化基本无抑制作用（全混流恒化器：Ｃｌ－＜４．５ｇ／Ｌ,ＳＯ２－４＜１．８ｇ／Ｌ;ＵＡＳＢ：Ｃｌ－＜７．２ｇ／Ｌ,ＳＯ２－４＜３．０ｇ／Ｌ）;轻度抑制（全混流恒化器：Ｃｌ－＝４．５～６．０ｇ／Ｌ,ＳＯ２－４＝１．８～３．３ｇ／Ｌ;ＵＡＳＢ：Ｃｌ－＝７．２～８．２ｇ／Ｌ,ＳＯ２－４＝３．０～４．１ｇ／Ｌ）;中度抑制（全混流恒化器：Ｃｌ－＝６．０～１３．８ｇ／Ｌ,ＳＯ２－４＝３．３～６．５ｇ／Ｌ;ＵＡＳＢ：Ｃｌ－＝８．２～１０．０ｇ／Ｌ,ＳＯ２－４＝４．１～６．０ｇ／Ｌ）和重度抑制（全混流恒化器：Ｃｌ－＞１３．８ｇ／Ｌ,ＳＯ２－４＞６．５ｇ／Ｌ;ＵＡＳＢ：Ｃｌ－＞１０．０ｇ／Ｌ,ＳＯ２－４＞６．０ｇ／Ｌ）的不同Ｃｌ－和ＳＯ２－４浓度范围．     

利用热带假丝酵母提高酶解马铃薯汁的蛋白质含量

马铃薯汁用糖化酶水解，接种热带假丝酵母，在摇床中３０℃，１２０ｒ／ｍｉｎ培养３ｄ．分别用（ＮＨ４）２ＳＯ４或柠檬酸铵为氮源，用Ｎａ２ＨＰＯ４－ＫＨ２ＰＯ４缓冲液和ＣａＣＯ３为ｐＨ值稳定物质时，测定发酵基质中蛋白质的增加量．结果表明，以（ＮＨ４）２ＳＯ４为氮源，用Ｎａ２ＨＰＯ４－ＫＨ２ＰＯ４缓冲液（０．０２ｍｏｌ／Ｌ，ｐＨ６．８）和ＣａＣＯ３（０．３％）为ｐＨ稳定物质时，发酵基质中蛋白质含量的增加值最大，以干重计，蛋白质含量从１０．４％增加到３９．６％．     

产胞外木聚糖酶青霉菌发酵条件的正交设计试验

正交设计试验结果表明,青霉菌（Ｐｅｎｉｃｉｌｌｉｕｍ ｓｐ．ｍ８） 胞外木聚糖酶活力达９２．９６ Ｕ／ｍＬ,合适的产酶发酵条件为：培养基（ｇ／Ｌ）,麦草粉４０,（ＮＨ４）２ＳＯ４ ４．４４,ＫＨ２ＰＯ４ １．０,ＭｇＳＯ４ ·７Ｈ２Ｏ０．５,ＮａＣｌ０．３,Ｔｗｅｅｎ ８０ ３．０,ＣａＣＯ３ １．０;每亳升培养基接种２．０×１０５ 个孢子,２８ ℃,水浴振荡培养４ ｄ（１２０ｒ／ｍｉｎ）。     

均匀设计在肌苷发酵中的应用

采用均匀设计对肌苷工程菌枯草芽孢杆菌株Ｑ２９０１－４－３５（ＳＧｒ）的最佳发酵条件进行了研究。确定发酵培养基配方为（质量分数）葡萄糖１２％ ,药用酵母粉１．４％ ,硫酸铵１．３％ ,玉米浆０．５％ ,Ｎａ２ＨＰＯ４·１２Ｈ２Ｏ ０．５％ ,ＫＣｌ０．６％ ,ＭｇＳＯ４·７Ｈ２Ｏ ０．２２％ ,ＣａＣＯ３ ２．０％ ,尿素０．２％ （分消）ｐＨ７．０,在上述发酵培养基中发酵产苷达１５．２０ｇ／Ｌ,该菌株的产苷能力比在原发酵培养基中的产苷能力提高了１０％ 。从而证明均匀设计实验所给回归模型对发酵条件的选择具有重要的指导意义。     

白蚁伞多糖的发酵生产

对白蚁伞在摇瓶和发酵罐中发酵产生白蚁伞多糖的动力学做了较为详细的研究。比较了几种不同培养基产生白蚁伞多糖的差异，筛选出在２８℃，２００ｒ／ｍｉｎ条件下，摇瓶产生白蚁伞多糖的最适培养基为黄豆粉葡萄糖培养基（以ｇ／Ｌ计）：黄豆粉５，葡萄糖３０，酵母浸膏粉２，ＫＨ２ＰＯ４１，ＭｇＳＯ４７Ｈ２Ｏ０．５，自来水配制，自然ｐＨ值（约５．５）。发酵１２０ｈ，达到最大的多糖产量０．５７３ｇ／Ｌ。在ＮｅｗＢｒｕｎｓｗｉｃｋＳｃｉｅｎｔｉｆｉｃ（ＮＢＳ）Ｂｉｏｆｌｏ－Ⅱ６．６Ｌ的发酵罐上设定２８℃，６００ｒ／ｍｉｎ，５～７Ｌ／ｍｉｎ的通气量发酵２７ｈ，达到最大的多糖产量０．５６５ｇ／Ｌ。发酵过程的ｐＨ和氨基氮变化与其它食用菌的不同。对苯酚－硫酸法测定糖含量的方法作了改进，使测定糖含量的标准曲线线性和准确性得到改善     

芽孢乳酸菌产乳酸条件的研究

同型乳酸发酵菌株ＴＱ３３的主要产物为Ｌ－乳酸,论文对其适用的发酵培养基和最佳的发酵条件进行了讨论,认为ＴＱ３３在培养基配方为葡萄糖１０ｇ、酵母膏１．５ｇ;蛋白胨０．５ｇ;ＭｇＳＯ４·７Ｈ２Ｏ：０．０５ｇ;碳酸钙６ｇ（ｐＨ７．２－７．４）时,４０℃下振荡（１５０ｒ／ｍｉｎ．）培养２４ｈ后转入静置发酵阶段,发酵７２ｈ产酸量达到最高为６７．８ｇ／Ｌ,其中Ｌ－乳酸占９６％以上。     

棒曲霉UA—2木聚糖酶的蔗渣固态发酵

棒曲霉（Ａｓｐｅｒｇｉｌｕｓｃｌａｖａｔｕｓ）ＵＡ－２固态发酵蔗渣产木聚酶的培养基为每克蔗渣加营养液５ｍｌ，初始ｐＨ８．５．营养液的适宜组成为每升含：ＮＨ４ＮＯ３１０ｇ、Ｋ２ＨＰＯ４６ｇ、ＭｇＳＯ４·７Ｈ２Ｏ０．７５ｇ、ＣａＣｌ２０．７５ｇ、ＦｅＳＯ４·７Ｈ２Ｏ１１．２５ｍｇ、ＭｎＳＯ４·Ｈ２Ｏ３．７５ｍｇ、ＺｎＳＯ４３．０ｍｇ、ＣｏＣｌ２４．５ｍｇ．在上述培养基中接入其湿重１０％（Ｗ／Ｗ）的新鲜的ＵＡ－２种子曲，２８℃培养１０８ｈ，其木聚糖酶，滤纸降解酶和羧甲基纤维素酶的活力分别为２６９５．６、２８．５和４２．７ｕ／ｇ蔗渣．酶反应的最适ｐＨ５．０，最适温度５０℃；在ｐＨ４．０～１１．０内酶活性十分稳定．５０℃保温１ｈ，酶活剩余５５％，８℃下放置２３ｄ，活力几乎不变．磷酸盐，半胱氨酸对酶有激活作用，ＥＤＴＡ和对氯汞本甲酸对酶有抑制作用     

甘蓝型油菜萝卜质不育系恢复材料Ad-6(F4)测交二代恢复株TCF2的快繁及生根

油菜萝卜胞质不育系恢复材料Ａｄ－６（Ｆ４）测交二代恢复株ＴＣＦ２,在ＭＳ附加５ｍ ｇ／Ｌ６－ＢＡ＋ ０．５ｍ ｇ／Ｌ ＮＡＡ,３ｍ ｇ／Ｌ ６－ＢＡ＋ ０．２ｍ ｇ／Ｌ ＮＡＡ,３ｍ ｇ／Ｌ ６－ＢＡ＋ ０．３ｍ ｇ／Ｌ ＮＡＡ＋６００ｍ ｇ／Ｌ水解乳蛋白以及５ｍ ｇ／Ｌ６－ＢＡ＋ ０．３ｍ ｇ／ＬＮＡＡ＋ ５ｍ ｇ／ＬＡｇＮＯ３ 的不同培养基上诱导丛生芽,结果表明５ｍ ｇ／Ｌ６－ＢＡ＋ ０．３ｍ ｇ／ＬＮＡＡ＋ ５ｍ ｇ／ＬＡｇＮＯ３ 对ＴＣＦ２ 诱导丛生芽有较好的效果．小芽生根培养基为１／２ＭＳ效果最好．     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.