(3+1)维Korteweg-de Vries (KdV)方程的高阶怪波解和多波浪解

基于Hirota双线性形式，一个新的（3+1）维Korteweg-de Vries（KdV）方程的高阶怪波解和多波浪解被得到.通过作图，更直观地展示和讨论了高阶怪波解和多波浪解的动力学性质.     

Dielectric relaxation and conduction mechanism in Aurivillius ceramic Bi5Ti3FeO15

For this study, we synthesized Aurivillius Bi5Ti3FeO15 ceramic using the generic solid-state reaction route and then performed room-temperature X-ray diffraction to confirm that the compound had a single phase with no impurities. The surface morphology of the prepared sample was observed to contain microstructural grains approximately 0.2–2 μm in size. The dielectric properties of the sample were determ-ined as a function of frequency in a range of approximately 100 Hz to 1 MHz at various temperatures (303 K ≤ T ≤ 773 K). Nyquist plots of the impedance data were found to exhibit a semi-circular arc in the high-temperature region, which is explained by the equivalent electrical circuit (R1C1)(R2QC2), where R1 and R2 represent the resistances associated with the grains and grain boundaries, respectively, C1 and C2 are the re-spective capacitances, and Q is the constant phase element (CPE), which accounts for non-Debye type of behavior. Our results indicate that both the resistance and capacitance of the grain boundaries are more prominent than those of the grains. The alternating current (ac) conductiv-ity data were analyzed based on the Jonscher universal power law, which indicated that the conduction process is dominated by the hopping mechanism. The calculated activation energies of the relaxation and conduction processes were very similar (0.32 to 0.53 eV), from which we conclude that the same type of charge carriers are involved in both processes.     

(3+1)维Boussinesq方程的可积性及新相互作用解

借助符号计算软件Maple证明了新的(3+1)维Boussinesq方程具有相容正切可积性,通过选取该方程的相容性条件方程的不同形式的解,得到了新的(3+1)维Boussinesq方程的孤子与其他波的相互作用解,如简单孤子解、孤子与椭圆余弦波作用解和共振孤子解,并给出了孤子与椭圆余弦波作用解和共振孤子解所对应的图形。     

团簇Co3FeP异构化反应的热力学与动力学研究

为了寻找团簇Co₃FeP的稳定性、结构和内部作用力等规律，利用密度泛函理论，在B3LYP/Lanl2dz的量化水平下对团簇Co₃FeP进行理论计算，得到5种优化构型，并从化学反应热力学与动力学的角度对其异构化反应中的反应物、过渡态和生成物进行了讨论分析。结果表明，所有构型均为C1对称且构型的空间结构对其熵值有影响；构型的稳定性主要由金属原子与非金属原子所决定，并且在常温常压下构型1^（3）、2^（3）和3^（3）可以稳定存在，是大部分异构化反应的最终产物。因此，在实际材料的开发中，不仅需要注意金属原子与非金属原子之间的作用力以确保构型的稳定性，还应首先考虑对稳定构型1^（3）、2^（3）和3^（3）进行相关研究。     

淀山湖水质及与环湖稻田农业面源污染的关系

对淀山湖主要进水和出水口水质进行年度定点监测; 同时, 布置田间试验, 研究不同施肥稻田田面水养分含量动态. 结果表明:淀山湖进出水口水体氨氮和总磷年平均质量浓度分别为 0.47 和 0.13 mg/L, 基本处于 Ⅴ 类水质标准; 进水口水质略劣于出水口, 不同进水口的水质也有很大差异. 进一步研究发现, 淀山湖水质的年度变化与稻田田面水养分的动态变化有密切的相关性, 表明农业面源污染对淀山湖水环境具有显著影响. 在环湖地区, 减少和控制农业面源, 是进一步改善淀山湖水环境质量的关键.     

G蛋白偶联受体的共同激活机制

G蛋白偶联受体(G protein-coupled receptor, GPCR)构成人体中最庞大的膜蛋白家族，也是最重要的一类药物靶 标。随着GPCR结构解析技术的突破，目前已破解八十余个受体的400多个结构，揭示出GPCR复杂多样的配体结合模式和 跨膜信号转导机制。近年来，残基相互作用计算已实现对GPCR构象变化的精细描述，揭示出A家族GPCR存在共同的激活 机制。文章简要回顾GPCR激活机制研究的方法和创新点，并对A家族GPCR共同激活机制如何推动功能研究和药物研发进行展望。     

不同表面活性剂对CoSb_3纳米粉体的影响及其非晶化研究

分别选用不同的表面活性剂(SDBS、CTAB、EDTA、PVP),采用水热法成功制备CoSb_3纳米粉体.对制备的纳米粉体分别进行XRD和SEM表征,研究了不同表面活性剂对制备的CoSb_3纳米粉体的影响.结果表明不同表面活性剂对制备的CoSb_3纳米粉体形貌有显著的影响.并将水热法制备的CoSb_3纳米粉体,采用脉冲激光非晶化技术进行处理,结果表明纳米粉体实现了部分非晶化.通过样品的XRD分析研究了影响CoSb_3纳米粉体部分非晶化的条件,结果表明扫描重复次数的增加可以提高CoSb_3基方钴矿热电材料的非晶化能力,适当提高扫描速度有利于CoSb_3基方钴矿热电材料的非晶化.     

基于3D Voronoi模型形状不规则度组合梯度泡沫金属的动态冲击力学性能研究

泡沫金属的力学性能与其细观结构参数密切相关。四个形状不规则度参数梯度组合的3D Voronoi结构模型被用于开展动态冲击数值仿真实验,探究不同冲击速度下形状不规则度梯度组合类型对泡沫金属的变形特性、荷载-位移和能量吸收特性的影响。结果表明,冲击速率仅在临界速度范围内时对形状不规则度梯度组合模型的力学性能有明显影响,沿着冲击方向形状不规则度从小到大梯度组合的模型具有最优的能量吸收能力。     

La$_{{1-x}}$Sr$_{x}$TiO$_{3}$ 薄膜的高通量 X 射线衍射

高通量材料合成方法和高通量材料表征手段区别于传统低效率的 "试错法"材料发展方法, 极大地加速了材料科学的变革和发展. 通过设计程序进行了高通量 X 射线衍射实验, 在保证数据分辨率条件下, 高效地表征了 La$_{1-x}$Sr$_{x}$TiO$_{3}$ 薄膜上多个数据位点的晶体结构, 验证了其成分的连续变化性质, 为后续开展更多类型的高通量 X 射线衍射实验提供了指导.     

低氧LiF–NdF3熔盐体系阳极过程的电化学行为研究

The oxidation of oxygen ions and the generation of an anode effect at a low oxygen content of 150 mg/kg were discussed in this paper. Cyclic voltammetry and square-wave voltammetry tests were conducted to explore the anodic processes of LiF–NdF₃ melt after a lengthy period of pre-electrolysis purification at 1000°C (during which the oxygen content reduced from 413 to 150 mg/kg). The oxidation process of oxygen ions was found to have two stages: oxidation product adsorption and CO/CO₂ gas evolution. The adsorption stage was controlled by diffusion, whereas the gas evolution was controlled by the electrochemical reaction. In comparison with oxygen content of 413 mg/kg, the decrease in the amplitude of the current at low oxygen content of 150 mg/kg was much gentler during the forward scanning process when the anode effect occurred. Fluorine-ion oxidation peaks that occurred at about 4.2 V vs. Li/Li+ could be clearly observed in the reverse scanning processes, in which fluorine ions were oxidized and perfluorocarbons were produced, which resulted in an anode effect.