基于相变操控的电润湿显示油墨填充与封装工艺研究

彩色油墨的填充与封装工艺是电润湿显示制造技术的核心，如何提高填充均匀性和制程效率仍然是电润湿显示技术量产的关键挑战之一。本文提出一种基于相变操控的电润湿显示油墨创新填充和封装方法，即在空气环境中完成油墨液相填充，经低温凝固后投入液体环境完成封装。该方法有效规避了在传统液下环境中填充涉及的油/水/固三相界面操控的复杂性，提高了填充工艺的兼容性和稳定性。对油墨厚度的分析结果表明，基于相变操控填充油墨厚度与像素墙高度的相关性更好，较传统自组装填充具有更好的膜厚控制性。相变操控填充电润湿显示器件的光电响应处于合理水平。本研究有效解决了电润湿显示油墨填充的技术瓶颈，对推进电润湿显示技术的应用具有重要意义。     

技术转移:企业资助的学术发明对创新的促进

<正>一般认为企业资助的学术研究对其他人来说是不太容易获取且用处不大的,布莱恩D.怀特及其同事提出的数据对这个看法提出了挑战。政府长期以来一直鼓励大学—企业之间的合作,以期对可以带来工作机会、强化投资并生产出改善生活质量产品的创新进行激励。同时,政府在科学上预算的收缩迫使大学通过其他途径寻求经费支持。根据美国国家科学基金会的统计,2012年由企业提供的科研经费只占到美国研究型大学年度科研经费的5%(大约32亿美元)。     

锂渣高性能混凝土的性能与微观结构

锂渣是新疆特有的工业废渣,为了寻求其利用,采用锂渣来配制高性能混凝土。从力学、抗裂、收缩性能与微观结构等方面探究其增强、抗裂机理。试验结果表明:锂渣的最大掺量不宜超过45%;随着掺量的增加,收缩率增加不明显,但都较空白组要小;当掺量在20%~30%时,其力学、抗裂性能较好;锂渣掺入混凝土后,细化了混凝土的凝胶孔,提高其密实度;且在混凝土中形成了一定量的AFt,改善了其抗裂、力学性能。     

对称格路与恒等式

对一种简单而又重要的组合结构——对称格路进行了研究。记dn,mn,sn分别为长2n的对称Dyck格路,M otzkin格路,Schr¨oder格路的个数。利用Riordan阵理论得到了他们之间所满足的六个组合恒等式并给予两个组合解释。最后,得到了特殊Riordan阵系数所满足的恒等式。根据某些恒等式估计长为2n的对称Dyck路平均中间高度和平均落在x轴上的点的个数。     

模拟结果为什么比实际更暖:简化气候模型结果（英文）

设计了一个非专业人士能够使用、最简化的气候敏感模型,用来研究人类活动所导致的全球变暖的幅度问题.在1990年的第一次IPCC评估报告中,IPCC对其报告中预测的未来全球变暖幅度很有信心,但是随后的观测结果显示全球的变暖幅度只有预测的一半.而自2001年起,全球变暖出现停滞,但是仅仅考虑到二氧化碳浓度的增加,很少有模型能够模拟出这一变化.在已出版的IPCC第五次评估报告的草稿中,IPCC大幅度削减了近期变暖的幅度,并以专家评估代替了模型预测.但是报告中关于未来气候长期变化的预测仍被保留.如果把IPCC模型的总反馈从1.9 W m–2 K–1调整到1.5 W m–2 K–1,气候敏感模型中模拟的温度将从3.2 K降至2.2 K.同时由于反馈很可能是净负反馈,更合适的估计应该是1.0 K.1.0 K是一个能够实现的增幅,21世纪的实际变暖将会小于1 K.即使燃烧所有可开采的化石燃料也不会使全球变暖的幅度超过2.2 K,这一增加幅度也将趋于平稳.本文认为解决IPCC第四、五次报告中评估方法的差异非常关键.一旦这些差异得到解决,人类活动导致的全球变暖在22世纪以及几个世纪以后的平稳态将有可能不会超过IPCC当前模型预测的1/3~1/2.     

Vertically aligned ZnO nanorods on porous silicon substrates: Effect of growth time

Vertically aligned ZnO nanorods were successfully grown on porous silicon(PS) substrates by chemical bath deposition at a low temperature.X-ray diffraction, field-emission scanning electron microscopy(FESEM), transmission electron microscopy(TEM), and photoluminescence(PL)analyses were carried out to investigate the effect of growth duration(2 h to 8 h) on the optical and structural properties of the aligned ZnO nanorods. Strong and sharp ZnO(0 0 2) peaks of the ZnO nanorods proved that the aligned ZnO nanorods were preferentially fabricated along the c-axis of the hexagonal wurtzite structure. FESEM images demonstrated that the Zn O nanorod arrays were well aligned along the c-axis and perpendicular to the PS substrates regardless of the growth duration. The TEM image showed that the top surfaces of the ZnO nanorods were round with a smooth curvature. PL spectra demonstrated that the ZnO nanorods grown for 5 h exhibited the sharpest and most intense PL peaks within the ultraviolet range among all samples.     

Effect of equal channel angular pressing on aging treatment of Al-7075 alloy

The effect of aging treatment on microstructure and mechanical properties of equal channel angular pressed Al-7075 alloy was examined.Commercial Al-7075 alloy in the solid solution heat-treated condition was processed by equal channel angular pressing through route BCat both the room temperature and 120 1C. Only three passes of equal channel angular pressing was possible due to the low ductility of the alloy at both temperatures. Followed by equal channel angular pressing, the specimens have been aged at 120 1C for different aging times. Mechanical properties were measured by Vickers microhardness and tensile tests and microstructural observations were undertaken using transmission electron microscopy, X-ray diffractometer as well as optical microscopy. Microstructural investigations showed that ultrafine-grained materials with grain size in the range of 200–350 nm and 300–500 nm could be obtained after three passes of equal channel angular pressing at room temperature and 120 1C, respectively. Equal channel angular pressing of solid solution heat-treated Al-7075 alloy accelerates precipitation rate and subsequently leads to a significant decrease in aging time to attain maximum mechanical properties. Furthermore, it is possible to achieve maximum mechanical properties during equal channel angular pressing at 120 1C as a result of dynamic aging and formation of small η′ phase.     

Design of optimum solid oxide membrane electrolysis cells for metals production

Oxide to metal conversion is one of the most energy-intensive steps in the value chain for metals production. Solid oxide membrane (SOM) electrolysis process provides a general route for directly reducing various metal oxides to their respective metals, alloys, or intermetallics. Because of its lower energy use and ability to use inert anode resulting in zero carbon emission, SOM electrolysis process emerges as a promising technology that can replace the state-of-the-art metals production processes. In this paper, a careful study of the SOM electrolysis process using equivalent DC circuit modeling is performed and correlated to the experimental results. A discussion on relative importance of each resistive element in the circuit and on possible ways of lowering the rate-limiting resistive elements provides a generic guideline for designing optimum SOM electrolysis cells.     

基于灰色相似关联关系的灰色变精度粗糙集模型及应用

针对决策信息系统含有大量的灰信息、噪声数据且属性值为区间灰数,而利用传统的方法对其处理时易造成信息损失,鉴于此,本文利用灰色系统理论的思想方法构建了一种新的灰色变精度粗糙集模型。该方法,首先利用灰色相似关联度定义基于阀值λ的灰色相似关联关系、灰色相似关联类,而后以灰色相似关联关系代替灰色变精度粗糙集模型的等价关系,构建了一种基于灰色相似关联度的灰色变精度粗糙集模型,进而研究了模型的相关性质,并以实例验证了新模型的有效性与适用性。     

ANALYSIS OF DYNAMIC PRICING SCENARIOS FOR MULTIPLE-GENERATION PRODUCT LINES

In technology-intensive markets,it is a common strategy for companies to develop long-term multiple generation product lines instead of releasing consecutive single products.Even though this strategy is more profitable than sequentially introducing single product generations,it can also result in inter-product line cannibalization.Cannibalization of multiple-generation product lines is a complex problem that needs to be taken into account at the early product line planning stage in order to sustain long-term profitability.In this paper,we propose an agent-based model that can simulate the potential cannibalization scenarios within a multiple-generation product line.We view a multiple-generation product line(MGPL) as complex adaptive system where each product generation in the MGPL adjusts its sales price over time based on the shifts in the market demand.The proposed model provides insights into how various pricing strategies impact the overall lifecycle profitability of MGPL and can be used to assist companies in developing appropriate dynamic pricing strategies at the early product line planning stages.