氧化锌矿物浸出渣中铅、锶的提取及动力学分析

NH₄HCO₃ conversion followed by HCl leaching was performed and proven to be effective in extracting Pb and Sr from zinc extracted residual. The mechanism and operating conditions of NH₄HCO₃ conversion, including molar ratio of NH₄HCO₃ to zinc extracted residual, NH₄HCO₃ concentration, conversion temperature, conversion time, and stirring velocity, were discussed, and operating conditions were optimized by the orthogonal test. Experimental results indicate that NH₄HCO₃ conversion at temperatures ranging from 25 to 85°C follows the shrinking unreacted core model and is controlled by inner diffusion through the product layer. The extraction ratios of Pb and Sr under optimized conditions reached 85.15% and 87.08%, respectively. Moreover, the apparent activation energies of Pb and Sr were 13.85 and 13.67 kJ·mol?1, respectively.     

皮秒Nd:YAG激光对生物金属纯Ti和Ti–13Nb–13Zr合金的表面改性

The effects of picosecond Nd:YAG laser irradiation on chemical and morphological surface characteristics of the commercially pure titanium and Ti–13Nb–13Zr alloy in air and argon atmospheres were studied under different laser output energy values. During the interaction of laser irradiation with the investigated materials, a part of the energy was absorbed on the target surface, influencing surface modifications. Laser beam interaction with the target surface resulted in various morphological alterations, resulting in crater formation and the presence of microcracks and hydrodynamic structures. Moreover, different chemical changes were induced on the target materials’ surfaces, resulting in the titanium oxide formation in the irradiation-affected area and consequently increasing the irradiation energy absorption. Given the high energy absorption at the site of interaction, the dimensions of the surface damaged area increased. Consequently, surface roughness increased. The appearance of surface oxides also led to the increased material hardness in the surface-modified area. Observed chemical and morphological changes were pronounced after laser irradiation of the Ti–13Nb–13Zr alloy surface.     

基于响应曲面法的铁焦冶金性能多目标协同优化

Iron carbon agglomerates (ICA) are used to realize low-carbon blast furnace ironmaking. In this study, the central composite design based on response surface methodology was used to synergistically optimize the compressive strength, reactivity, and post-reaction strength of ICA. Results show that the iron ore addition ratio significantly influences the compressive strength, reactivity, and post-reaction strength of ICA. The iron ore addition ratio and carbonization temperature or the iron ore addition ratio and carbonization time exert significant interaction effects on the compressive strength and reactivity of ICA, but it has no interaction effects on the post-reaction strength of ICA. In addition, the optimal process parameters are as follows: iron ore addition ratio of 15.30wt%, carbonization temperature of 1000°C, and carbonization time of 4.27 h. The model prediction results of compressive strength, reactivity, and post-reaction strength are 4026 N, 55.03%, and 38.24%, respectively, which are close to the experimental results and further verify the accuracy and reliability of the models.     

汽车用废弃锂离子电池的减量化、再生及回收研究进展

The demand for Li-ion batteries (LIBs) for vehicles is increasing. However, LIBs use valuable rare metals, such as Co and Li, as well as environmentally toxic reagents. LIBs are also necessary to utilize for a long period and to recycle useful materials. The reduction, reuse, and recycle (3R) of spent LIBs is an important consideration in constructing a circular economy. In this paper, a flowsheet of the 3R of LIBs is proposed and methods to reduce the utilization of valuable rare metals and the amount of spent LIBs by remanufacturing used parts and designing new batteries considering the concept of 3R are described. Next, several technological processes for the reuse and recycling of LIBs are introduced. These technologies include discharge, sorting, crushing, binder removal, physical separation, and pyrometallurgical and hydrometallurgical processing. Each process, as well as the related physical, chemical, and biological treatments, are discussed. Finally, the problem of developed technologies and future subjects for 3R of LIBs are described.     

传统加热和微波加热下氧化锰矿的碳热还原行为研究

For the purpose of exploring a potential process to produce FeMn, the effects of microwave heating on the carbothermal reduction characteristics of oxidized Mn ore was investigated. The microwave heating curve of the mixture of oxidized Mn ore and coke was analyzed in association with the characterization of dielectric properties. The comparative experiments were conducted on the carbothermal reductions through conventional and microwave heatings at temperatures ranging from 973 to 1373 K. The thermogravimetric analysis showed that carbothermal reactions under microwave heating proceeded to a greater extent and at a faster pace compared with those under conventional heating. The metal phases were observed in the microstructures only under microwave heating. The carbothermal reduction process under microwave heating was discussed. The electric and magnetic susceptibility differences were introduced into the thermodynamics analysis for the formation of metal Mn. The developed thermodynamics considered that microwave heating could make the reduction of MnO to Mn more accessible and increase the reduction extent.     

机械合金化法制备的Cu/SiC纳米复合材料的组织、热性能和力学性能评估

Nano-sized silicon carbide (SiC: 0wt%, 1wt%, 2wt%, 4wt%, and 8wt%) reinforced copper (Cu) matrix nanocomposites were manufactured, pressed, and sintered at 775 and 875°C in an argon atmosphere. X-ray diffraction (XRD) and scanning electron microscopy were performed to characterize the microstructural evolution. The density, thermal expansion, mechanical, and electrical properties were studied. XRD analyses showed that with increasing SiC content, the microstrain and dislocation density increased, while the crystal size decreased. The coefficient of thermal expansion (CTE) of the nanocomposites was less than that of the Cu matrix. The improvement in the CTE with increasing sintering temperature may be because of densification of the microstructure. Moreover, the mechanical properties of these nanocomposites showed noticeable enhancements with the addition of SiC and sintering temperatures, where the microhardness and apparent strengthening efficiency of nanocomposites containing 8wt% SiC and sintered at 875°C were 958.7 MPa and 1.07 vol%?1, respectively. The electrical conductivity of the sample slightly decreased with additional SiC and increased with sintering temperature. The prepared Cu/SiC nanocomposites possessed good electrical conductivity, high thermal stability, and excellent mechanical properties.     

空冷条件下钛渣颗粒的氧化路径及氧化动力学

The oxidation pathway and kinetics of titania slag powders in air were analyzed using differential scanning calorimetry (DSC) andthermogravimetry (TG). The oxidation pathway of titania slag powder in air was divided into three stages according to their three exothermic peaks and three corresponding mass gain stages indicated by the respective non-isothermal DSC and TG curves. The isothermal oxidation kin-etics of high titania slag powders of different sizes were analyzed using the ln-ln analysis method. The results revealed that the entire isotherm-al oxidation process comprises two stages. The kinetic mechanism of the first stage can be described as f (α)=1.77 (1?α) [?ln (1?α)](1.77?1)/1.77 , f (α)=1.97 (1?α) [?ln (1?α)](1.97?1)/1.97 , and f (α)=1.18 (1?α) [?ln (1?α)](1.18?1)/1.18 . The kinetic mechanism of the second stage for all samples can be described as f (α)=1.5(1?α)2/3[1?(1?α)1/3]?1 . The activation energies of titania slag powders with different sizes (d1 < 0.075 mm, 0.125 mm < d2 < 0.150 mm, and 0.425 mm < d3 < 0.600 mm) for different reaction degrees were calculated. For the given experimental conditions, the rate-controlling step in the first oxidation stage of all the samples is a chemical reaction. The rate-controlling steps of the second oxidation stage are a chemical reaction and internal diffusion (for powders d1 < 0.075 mm) and internal diffusion (for powders 0.125 mm < d2 <0.150 mm and 0.425 mm < d3 < 0.600 mm).     

烧结铁矿中FeO含量对其在富氢高炉中还原行为的影响

Japan started the national project “COURSE 50” for CO₂ reduction in the 2000s. This project aimed to establish novel technologies to reduce CO₂ emissions with partially utilization of hydrogen in blast furnace-based ironmaking by 30% by around 2030 and use it for practical applications by 2050. The idea is that instead of coke, hydrogen is used as the reducing agent, leading to lower fossil fuel consumption in the process. It has been reported that the reduction behavior of hematite, magnetite, calcium ferrite, and slag in the sinter is different, and it is also considerably influenced by the sinter morphology. This study aimed to investigate the reduction behavior of sinters in hydrogen enriched blast furnace with different mineral morphologies in CO–CO₂–H₂ mixed gas. As an experimental sample, two sinter samples with significantly different hematite and magnetite ratios were prepared to compare their reduction behaviors. The reduction of wustite to iron was carried out at 1000, 900, and 800°C in a CO–CO₂–H₂ atmosphere for the mineral morphology-controlled sinter, and the following findings were obtained. The reduction rate of smaller amount of FeO led to faster increase of the reduction rate curve at the initial stage of reduction. Macro-observations of reduced samples showed that the reaction proceeded from the outer periphery of the sample toward the inside, and a reaction interface was observed where reduced iron and wustite coexisted. Micro-observations revealed three layers, namely, wustite single phase in the center zone of the sample, iron single phase in the outer periphery zone of the sample, and iron oxide-derived wustite FeO and iron, or calcium ferrite-derived wustite 'FeO' and iron in the reaction interface zone. A two-interface unreacted core model was successfully applied for the kinetic analysis of the reduction reaction, and obtained temperature dependent expressions of the chemical reaction coefficients from each mineral phases.     

Mg和La对Ca–Ti 处理钢中夹杂物演变和组织的影响

The evolution of inclusions and the formation of acicular ferrite (AF) in Ca–Ti treated steel was systematically investigated after Mg and La addition. The inclusions in the molten steel were Ca–Al–O, Ca–Al–Mg–O, and La–Mg–Ca–Al–O after Ca, Mg, and La addition, respectively. The type of oxide inclusion in the final quenched samples was the same as that in the molten steel. However, unlike those in molten steel, the inclusions were Ca–Al–Ti–O + MnS, Ca–Mg–Al–Ti–O + MnS, and La–Ca–Mg–Al–Ti–O + MnS in Mg-free, Mg-containing, and La-containing samples, respectively. The inclusions distributed dispersedly in the La-containing sample. In addition, the average size of the inclusions in the La-containing sample was the smallest, while the number density of inclusions was the highest. The size of effective inclusions (nucleus of AF formation) was mainly in the range of 1–3 μm. In addition, the content of ferrite side plates (FSP) decreased, while the percentage of AF increased by 16.2% due to the increase in the number of effective inclusions in the La-containing sample in this study.     

铁酸锌焙烧后的还原行为及氨浸特性

A novel method for recovering zinc from zinc ferrite by reduction roasting–ammonia leaching was studied in this paper. The reduction thermodynamic of zinc ferrite by CO was analyzed. The effects of roasting parameters on the phase transformation and conversion rate of zinc ferrite, and the leaching behavior of zinc from the reductive roasted samples by ammonia leaching, were experimentally investigated. The mineralogical phase compositions and chemical compositions of the samples were characterized by X-ray diffraction and chemical titration methods, respectively. The results showed that most of the zinc ferrite was transformed to zinc oxide and magnetite after weak reduction roasting. 86.43% of the zinc ferrite was transformed to zinc oxide under the optimum conditions: CO partial pressure of 25%, roasting temperature of 750°C, and roasting duration of 45 min. Finally, under the optimal leaching conditions, 78.12% of zinc was leached into the solution from the roasted zinc ferrite while all iron-bearing materials were kept in the leaching residue. The leaching conditions are listed as follows: leaching duration of 90 min, ammonia solution with 6 mol/L concentration, leaching temperature of 50°C, solid-to-liquid ratio of 40 g/L, and stirring speed of 200 r/min.     

空间环境对植物影响的研究进展

从蛋白质和基因水平分别介绍空间微重力、强电离辐射、亚磁场及空间综合因素对生物性状和遗传变异的影响,并对今后空间诱变育种的前景和存在问题加以概述。     

关于短信网关的分析论述

信息作为我们生活交流媒介的一部分,那么信息的接收和发送更值得我们深入的认识和研究.主要从短信网关的引入、短信网关的系统组成、短信网关的系统功能以及应用短信网关服务进行分析论述.     

基于Hyper-V的校内私有云构建研究

针对云计算的发展趋势,结合校园网基础设施特点,研究和分析了虚拟化技术和云计算模式,提出一种基于Hyper-V的私有云计算环境模式,并在校园网内实现了该模式的私有云构建,为云计算环境在高校的实现提供了具体方法。     

绝缘体上硅高温压力传感器研究

采用有限元分析工具ANSYS完成了一种矩形弹性膜绝缘体上硅(SOI)高温压力传感器的优化设计，制作出样品，并与相同结构、工艺的多晶硅压力传感器进行了对比测试。结果表明：1：2的膜片宽长比可以使SOI压力传感器的灵敏度达到220mV／MPa，远大于多晶硅压力传感器的灵敏度(约50mV／MPa)。此外，该传感器能够工作在200℃的高温环境中，有良好的长期稳定性，30d内的零点时间漂移为0．12％。     

基于AJAX的WebGIS应用

针对目前WebGIS中所存在的问题,介绍了AJAX方法的概念和内涵,提出了基于AJAX方法构建网络地理信息系统的思路。并以森林资源信息网络发布系统的原型开发为例,阐述了该方法的优点和一些关键技术。结果表明通过AJAX方法的使用不仅能够快速地实现森林资源信息的网络发布功能,而且能够很好地改善WebGIS应用中以地图为载体的地理信息的网络传播和显示速度,带来丰富的用户体验。     

Study on copper adsorption on olivine

The copper adsorption on olivine supplied by A/S Olivine production plant at Aheim in western Norway has been studied. The factors which affect the uptake of copper have been evaluated. The results reveal that the equilibrium PH in aqueous solution has the greatest influence on the copper adsorption thanks to the competitive adsorption between proton and copper ions, and the adsorption of copper to olivine increases rapidly with the pH increasing from 4 to 6. The initial copper concentration and olivine dose also possess significant effect on copper adsorption. The adsorption efficieny of copper increases with the increase of olivine dose or the decrease of initial copper concentration at the same pH. The ionic strength effect on the adsorption has also been investigated, but it owns little effect on the adsorption process of copper due to the formation of inner sphere surface complexation of copper on olivine. The experimental data show that olivine has a high acid buffer capacity and is an effective adsorbent for copper.     

基于SOPC的SVPWM波形研究

介绍一种采用SOPC技术设计的SVPWM波形发生器,在FPGA中嵌入了32位NiosⅡ软核系统,用以处理SVPWM波形的计算、输出与显示等功能.利用可编程逻辑器件的可在线编程特点和SOPC的技术优势,灵活、快捷地将所需功能模块完全集成在单片的FPGA上,使电路的硬件结构简单,具有较高的性价比.     

论企业负债经营及其相关问题分析

在目前企业普遍存在着自有资金短缺的情况下，负债经营已成为必要途径。负债经营可以提高企业的市场竞争能力，扩大生产规模，减少货币贬值的损失，降低综合资金成本；同时，负债经营也增加了企业的财务风险，企业要优化资本结构，保持适度的资产负债率，制定出最佳的负债财务计划。     

网格体系结构研究

本文从不同角度介绍了网格的概念,并明确网格体系结构的作用和目的,接着详细地描述了网格体系结构的两个方案———五层沙漏结构和开放网格服务结构,最后对网格的前景作了展望。