Banach空间非柱形域上微分系统解的存在性

考虑在Banach空间非柱形域Ω上,微分系统 (IVP;τ,z0) z′=x′ y′=f1(t,x,y) f2(t,x,y)=f(t,z), (t,z)∈Ω, z(τ)=x(τ) y(τ)=z0=x0 y0 解的局部存在性,其中f1,f2分别满足紧性条件与耗散性条件,得到的结果推广并完善了已有的相关结果。     

τ-拓扑下的不动点定理

τ是X的一个线性H ausdorff拓扑,在一致τ-O p ia l或τ-UKK条件下,给出了渐近非扩张型映照的不动点定理.由于L1(μ)并不具备通常的O p ia l条件,但是在L1(μ)赋予抽象测度拓扑τ下,(X,τ)满足一致τ-O p ia条l件,从而给出L1(μ)中渐近非扩张型映照的不动点定理.     

求解热学中热传导方程Ut＋Ux＋Uxx-δUxxt=0的三层差分格

文章提出了一个解双温热传导方程的一种新的三层差分格式,Ut＋Ux＋Uxx-δUxxt=0此差分格式具有二阶精度,其截断误差阶为o（τ^2＋h^2）,此差分格式条件稳定,稳定条件是：δh^2/τ〉1/2。     

一类二阶中立型泛函微分方程的多重周期解

利用变分原理和Zz不变群指标,研究一类二阶中立型泛函微分方程（p（t）（μx＇（t）＋x＇（t-τ）＋μx＇（t-2τ）））’-q（t）x（t-τ）＋λf（t,x（t））,x（t-τ）,x（t-2τ））=0,｜μ｜〈1/2多重周期解的存在性问题,得出了有关新结果．     

抛物型方程的一个新的GE-3并行算法

利用Saul’yev格式和它的对称格式及一个绝对稳定的隐格式,构造了一个求解抛物型方程的分组显式(GE-3)并行算法,该算法的截断误差为O(τ+h2),条件稳定.数值例子验证了理论分析的有效性。     

一类二阶泛函微分方程的多重周期解

利用变分原理和Z2不变群指标研究二阶泛函微分方程：（a（t）x′（t-τ））′-b（t）x（t）＋fλ（t,x（t）,x（t-）τ,x（t-2τ））=0的多重周期解,得出相关结果。     

乘积测度的表示与集的截口的测度的可测性

设T,X是完备可分的度量空间,T×X是乘积空间.设ν是T上的完备的Borel概率测度,τ是X上的预测度.从ν和τ出发,可以通过两种不同方式定义乘积空间T×X上的测度.证明在τ是σ-有限的情形下,这两种方式定义的测度都等于T×X上的乘积测度ν×τ*,其中τ*表示由τ按方法Ⅰ所构造的外测度;在τ是非σ-有限时,证明了在一定的条件下函数τ(Et)与τ*(Et)都是T上的可测函数,其中E T×X,Et={x∈X;(t,x)∈E}.     

抛物型方程的一个新的并行算法

本文构造了带一个参数的两层六点半显格式和它的对称格式,利用这两个格式建立求解抛物型方程分组显式(GE)并行算法,该算法的截断误差为O(τ h2),条件稳定.当参数取特定值时, 该算法的截断误差可提高到O(τ2 h3).当参数取零、网比r取特定值时,该算法的截断误差可达到O(τ2 h4).当空间节点为奇数时,构造了GEL格式和GER格式.     

关于方程ut=au_x+bu_(xxx)的一个绝对稳定的半显式格式

本文推广了文[7]的结果,给出了方程uk=au_x+bu_(xxx)的一个绝对稳定的半显式格式,其截断误差为O(τ~2+h~2τ~2/h+τ2~/h~3)。给出的数值例子说明理论分析与计算结果相符。     

广义双τ2屈服准则

建立了金属材料的广义双τ2屈服准则,讨论了准则的屈服线形状,通过误差分析,给出一种能较好代替Mises准则的加权双τ2屈服准则.     

Markedness and its Interpretation in Language Use

Language markedness is a common phenomenon in languages, and is reflected from hearing, vision and sense, i.e. the variation in the three aspects such as phonology, morphology and semantics. This paper focuses on the interpretation of markedness in language use following the three perspectives, i.e. pragmatic interpretation, psychological interpretation and cognitive interpretation, with an aim to define the function of markedness.     

Lower Paleozoic oil relationships within Williston Basin, Canada

The Williston Basin is a significant petroleum province, containing oil production zones that include the Middle Cambrian to Lower Ordovician, Upper Ordovician, Middle Devonian, Upper Devonian and Mississippian and within the Jurassic and Cretaceous. The oils of the Williston Basin exhibit a wide range of geochemical characteristics defined as "oil families", although the geochemical signature of the Cambrian Deadwood Formation and Lower Ordovician Winnipeg reservoired oils does not match any "oil family". Despite their close stratigraphic proximity, it is evident that the oils of the Lower Palaeozoic within the Williston Basin are distinct. This suggests the presence of a new "oil family" within the Williston Basin. Diagnostic geochemical signatures occur in the gasoline range chromatograms, within saturate fraction gas chromatograms and biomarker fingerprints. However, some of the established criteria and cross-plots that are currently used to segregate oils into distinct genetic families within the basin do not always meet with success, particularly when applied to the Lower Palaeozoic oils of the Deadwood and Winnipeg Formation.     

An Analysis of Catherine＇s Character——Wuthering Heights

Wuthering Heights, Emily Bronte＇s only novel, was published in December of 1847 under the pseudonym Ellis Bell. The book did not gain immediate success, but it is now thought one of the finest novels in the English language. Catherine is the key character of this masterpiece, because everybody and everything center on her though she had a short life. We can understand this masterpiece better if we know Catherine well.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

Design and analysis of generic LBS application developing platform

Location based services is promising due to its novel working style and contents.A software platform is proposed to provide application programs of typical location based services and support new applications developing efficiently. The analysis shows that this scheme is easy implemented, low cost and adapt to all kinds of mobile nework system.     

橡胶颗粒沥青混合料低温抗裂性试验研究

以AC-13级配为基础,将橡胶颗粒代替部分集料掺入混合料中,以低温弯曲试验为评价方法对不同橡胶颗粒掺量下沥青混合料的低温抗裂性进行研究,并引入应变能密度值对混合料的低温抗裂性进行综合评价.试验结果表明:橡胶颗粒沥青混合料试件的破坏微应变均超过2 300,满足冬寒区的技术指标;无论是否掺加橡胶颗粒,随着温度的下降,沥青混合料破坏时的最大弯拉强度增大,弯拉应变降低,劲度模量增大;弯曲应变能密度在胶粒掺量为1%左右时具有较大的弯曲应变能密度值,此时橡胶颗粒沥青混合料具有较好的低温抗裂性.     

低渗透非均质砂岩油藏启动压力梯度研究

理论推导与室内实验相结合,建立了低渗透非均质砂岩油藏启动压力梯度确定方法。首先借助油藏流场与电场相似的原理,推导了非均质砂岩油藏启动压力梯度计算公式。其次基于稳定流实验方法,建立了非均质砂岩油藏启动压力梯度测试方法。结果表明:低渗透非均质砂岩油藏的启动压力梯度确定遵循两个等效原则。平面非均质油藏的启动压力梯度等于各级渗透率段的启动压力梯度关于长度的加权平均;纵向非均质油藏的启动压力梯度等于各渗透率层的启动压力梯度关于渗透率与渗流面积乘积的加权平均。研究成果可用于有效指导低渗透非均质砂岩油藏的合理井距确定,促进该类油藏的高效开发。     

Quantitative trait loci （QTLs） for quality traits related to protein and starch in wheat

Quality traits in wheat （Triticum aestirum L.） were studied by quantitative trait locus （QTL） analysis in a recombinant inbred line （RIL） population, a set of 131 lines derived from Chuan 35050 × Shannong 483 cross （ChSh）. Grains from RILs were assayed for 21 quality traits related to protein and starch. A total of 35 putative QTLs for 19 traits with a single QTL explaining 7.99-40.52% of phenotypic variations were detected on 10 chromosomes, 1D, 2A, 2D, 3B, 3D, 5A, 6A, 6B, 6D, and 7B. The additive effects of 30 QTLs were positive, contributed by Chuan 35050, the remaining 5 QTLs were negative with the additive effect contributed by Shannong 483. For protein traits, 15 QTLs were obtained and most of them were located on chromosomes 1 D, 3B and 6D, while 20 QTLs for starch traits were detected and most of them were located on chromosomes 3D, 6B and 7B. Only 7 QTLs for protein and starch traits were co-located in three regions on chromosomes 1D, 2A and 2D. These protein and starch trait QTLs showed a distinct distribution pattern in certain regions and chromosomes. Twenty-two QTLs were clustered in 6 regions of 5 chromosomes. Two QTL clusters for protein traits were located on chromosomes 1D and 3B, respectively, three clusters for starch traits on chromosomes 3D, 6B and 7B, and one cluster including protein and starch traits on chromosome 1D.     

On Tragic Consciousness In The Works By Ernest Hemingway

As an American modern novelist who were famous in the literary world, Hemingway was not a person who always followed the trend but a sharp observer. At the same time, he was a tragedy maestro, he paid great attention on existence, fate and end-result. The dramatis personae's tragedy of his works was an extreme limit by all means tragedy on the meaning of fearless challenge that failed. The beauty of tragedy was not produced on the destruction of life, but now this kind of value was in the impact activity. They performed for the reader about the tragedy on challenging for the limit and the death.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…