荞麦的组织培养及植株再生

荞麦（Ｆａｇｏｐｙｒｕｍ ｅｓｃｕｌｅｎｔｕｍ Ｍｏｅｎｃｈ．）无菌苗下胚轴切段在含不同激素配比的ＭＳ培养基上进行愈伤组织诱导,发现在 ２． ０ ｍｇ／Ｌ ２． ４－Ｄ与 １． ５ ｍｇ／Ｌ ６ ＢＡ组合时,可１００％地诱导出愈伤组织。愈伤组织在含 １．５ｍｇ／Ｌ ６ＢＡ和１．５ ｍｇ／Ｌ ２．４－Ｄ的激素条件下继代培养１代后转入含２ｍｇ／Ｌ ６ ＢＡ和１ｍｇ／Ｌ ＫＴ的 ＭＳ培养基上,计有８０％以上可分化出苗。转入０．２ｍｇ／Ｌ ＮＡＡ的 １／２ＭＳ培养基上则可诱导出根。研究建立了荞麦离体诱导高频率再生植株的实验体系。     

播娘蒿子叶及下胚轴诱导再生植株的研究

用揪娘嵩种子,在附加６－ＢＡ０．５～１．０ｍｇ／Ｌ＋ＮＡＡ０．１ｍｇ／Ｌ的ＭＳ培养基上获得无菌苗,幼苗的下胚轴在含６－ＢＡ０．１ｍｇ／Ｌ＋ＮＡＡ０．５ｍｇ／Ｌ的ＭＳ培养基上的出愈情况最佳,将来自下胚轴的愈伤组织培养了含有６－ＢＡ２．０ｍｇ／Ｌ＋ＮＡＡ０．２ｍｇ／Ｌ的ＭＳ培养基上分化出的丛生芽状态最好,最佳生根培养基为１／２ＭＳ＋ＩＢＡ０．５ｍｇ／Ｌ＋ＮＡＡ０．０５ｍｇ／Ｌ。     

播娘蒿子叶及下胚轴诱导再生植珠的研究

用播娘蒿种子，在附加６－ＢＡ０．５～１．０ｍｇ／Ｌ＋ＮＡＡ０．１ｍｇ／Ｌ的ＭＳ培养基上获得无菌苗，幼苗的下胚轴在含６－ＢＡ０．１ｍｇ／Ｌ＋ＮＡＡ０．５ｍｇ／Ｌ的ＭＳ培养基上出愈情况最佳，将来自下胚轴的愈伤组织培养于含有６－ＢＡ２．０ｍｇ／Ｌ＋ＮＡＡ０．２ｍｇ／Ｌ的ＭＳ培养基上分化出的丛生芽状态最好，最佳生根培养基为１／２ＭＳ＋ＩＢＡ０．５ｍｇ／Ｌ＋ＮＡＡ０．０５ｍｇ／Ｌ．     

球茎甘蓝花托花柄组织培养及其植株再生

球茎甘蓝花托、花柄在ＭＳ＋２,４－Ｄ０．５ｍｇ／Ｌ＋６－ＢＡ１ｍｇ／Ｌ培养基上培养,诱导形成愈伤组织．愈伤组织在ＭＳ＋ＮＡＡ０．５ｍｇ／Ｌ＋６－ＢＡ３ｍｇ／Ｌ的分化培养基上培养,能分化出芽．花托在附加６－ＢＡ和ＧＡ３的ＭＳ培养基上培养,能直接出芽．花柄在附加６－ＢＡ或６－ＢＡ和ＧＡ３的ＭＳ培养基上培养,能直接出芽．芽通过继代培养,能再生植株     

枸杞花药愈伤组织细胞悬浮培养与植株再生

采用枸杞花药进行离体培养,建立细胞系,诱导植株再生,结果在含不同激素的４种培养基上都诱导出愈伤组织,诱导率在１．７％￣１６．９％,愈伤组织在ＭＳ＋２,４－Ｄ０．５ｍｇ／Ｌ的固体培养基上获得大量单细胞,在液体培养基中获得含有大量胚状体的愈伤组织块,收集悬浮培养物转移到ＭＳ＋６ＢＡ０．２ｍｇ／Ｌ的固体培养基上,胚状体能够萌发形成大量绿色小芽,转入生根培养基（ＭＳ＋ＮＡＡ０．２ｍｇ／Ｌ）中,２０ｄ后得到     

雪兔子叶的组织培养及植株再生

以雪兔子无菌苗的幼叶为外植体,接种到ＭＳ补加ＮＡＡ（１．０－２．０）ｍｇ／Ｌ、６－ＢＡ（０．１－１．０）ｍｇ／Ｌ的培养基上诱导愈伤组织,其中以ＭＳ＋ＮＡＡ２．０ｍｇ／Ｌ＋６－ＢＡ０．５ｍｇ／Ｌ的诱导效果最好,经６周培养即可形成大量的黄绿色愈伤组织,诱导率可达１００％,经２－３次继代培养后,将生长发良好的愈伤组织转接到ＭＳ附加６－ＢＡ（０．５－２．０）ｍｇ／Ｌ、ＩＡＡ（０．０５－０．１）ｍｇ／Ｌ、Ｎ     

荞麦组织培养中的植株再生

用荞麦无菌苗的幼茎和幼叶作外植体分别接种在ＭＳ补加不同激素组合的培养基上培养获得再生植株。实验结果表明,适宜诱导愈伤组织的激素组合为２．４－Ｄ４．０ｍｇ／Ｌ＋ＫＴ０．２ｍｇ／Ｌ,适宜愈伤组织生长的激素组合为２．４－Ｄ１．０ｍｇ／Ｌ＋ＫＴ１．０ｍｇ／Ｌ。诱导芽的较适宜的组合为６－ＢＡ３．０ｍｇ／Ｌ＋ＩＡＡ０．１ｍｇ／Ｌ,不定芽接种到含ＭＳ＋ＩＢＡ２．０ｍｇ／Ｌ＋ＫＴ０．１ｍｇ／Ｌ的ＭＳ培养基上就能生     

番红花离体培养下花柱－柱头状物的诱导及植株再生

番红花花被和花柱，在含４ｍｇ／ＬＫＴ，３ｍｇ／ＬＮＡＡ和０．６ｍｇ／Ｌ４ＰＵ－３０的ＭＳ培养基中可定向再生红色花柱－柱头状物，花被的诱导频率大于花柱；长度为２２～６６ｍｍ的花芽具有较高的诱导频率（３４．４％）．番红花球茎在含１．４ｍｇ／ＬＮＡＡ和０．６ｍｇ／ＬＫＴ或０．８ｍｇ／Ｌ２，４－Ｄ的Ｂ５和ＭＳ培养基上，均能诱导出颗粒状愈伤组织，愈伤组织在附加０．６～１．４ｍｇ／ＬＮＡＡ的ＭＳ培养基上，既可形成小球茎，也能长出完整植株     

发根农杆菌A4对骆驼刺的遗传转化

用野生型发根农杆菌（Ａｇｒｏｂａｃｔｅｒｉｕｍ ｒｈｉｚｏｇｅｎｅｓ）Ａ４菌株感染骆驼刺（Ａｌｈａｇｉ ｐｓｅｕｄｏａｌｈａｇｉ）无菌苗的子叶和下胚轴,１５ｄ左右在感染部位诱导出发根。将发根切段放在附加２．０ｍｇ／Ｌ２,４－Ｄ和０．５ｍｇ／Ｌ６ＢＡ的ＭＳ培养基上诱导愈伤组织,在３．０ｍｇ／Ｌ６ＢＡ的ＭＳ培养基上进一步分化形成完整植株,冠瘿碱检测结果表明,不仅在初生发根中,在次生发根、来源于发率的愈     

苜蓿组织培养体细胞胚发生的细胞学观察

苜蓿无菌苗下胚轴在含２ｍｇ／Ｌ２．４－Ｄ和０．５ｍｇ／Ｌ６ＢＡ的ＭＳ培养其中诱导出愈伤组织，愈伤组织在含有３ｍｇ／ＬＮＡＡ和１．５ｍｇ／ＬＫＴ的ＳＨ培养基中形胚性愈伤组织，并伴随有体细胞胚的发生。     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.