Cu—Mn—Pt／γ—Al2O3系列催化剂中组分间的活性增强效应

通过ＣＯ氧化活性测试，采用ＸＲＤ、ＸＰＳ、ＴＰＲ等方法表征，研究了Ｃｕ－Ｍｎ－Ｐｔ／γ－Ａｌ２Ｏ３系列催化剂中组分间的活性增强效应，并对其固相结构和表面组成进行表征．结果表明：（１）氧化型ＣｕＭｎ／γ－Ａｌ２Ｏ３催化剂中Ｃｕ和Ｍｎ之间存在一定的活性增强效应，两种活性组分发生协同作用；（２）还原型Ｐｔ－Ｃｕ／γ－Ａｌ２Ｏ３和Ｐｔ－Ｍｎ／γ－Ａｌ２Ｏ３催化剂的氧化活性在系列中最高，Ｐｔ－Ｍｎ／γ－Ａｌ２Ｏ３的ＣＯ氧化活性增强效应最为显著．这与加人Ｐｔ后，Ｃｕ２＋易被还原，Ｃｕ＋明显增多有关；（３）同时含有Ｃｕ、Ｍｎ组分的几种催化剂中，催化剂表面上Ｃｕ均有一定富集，加人Ｐｔ后，表相以Ｃｕ＋为主．由于Ｃｕ－Ｍｎ－Ｐｔ三元催化剂的制备方法不同，以致氧化活性相差很大，共浸制备较分浸制备的催化剂活性要好的多．     

2,4—二硝基氟苯液相选择性催化氢化的研究

研究以 Ｐｄ Ｃｌ２／ Ｃ＋ Ｆｅ（ Ｏ Ａｃ）２ 为催化剂,乙酸和乙醇为溶剂,在室温和低压下用氢气选择性还原２ ,４ － 二硝基氟苯为２ － 氟－ ５ － 硝基苯胺,选择性还原收率为７６ ．１ ％ ,产品纯度为９９ ．０ ％ 。     

稀土金属镱及钇苦味酸盐与苯并15冠5配合物的晶体和分子结构

标题化合物Ｙｂ（Ｐｉ）＿３（Ｂｌ５Ｃ５）＿２·２Ｈ＿２Ｏ·ＣＨ＿３ＣＮ（Ｉ）及Ｙ（Ｐｉ）＿３（Ｂｌ５Ｃ５）＿２·２Ｈ＿２Ｏ·ＣＨ＿３ＣＮ（Ⅱ）为同晶结构，均为３斜晶系，空间群为Ｐ－对晶体（Ｉ），ａ＝１２．７５３（１）Ａ，ｂ＝１３．８１０（２）Ａ．ｃ＝１９．６０９（２）Ａ，α＝８１．３７（３）°，β＝７１．５８（３）°，γ＝７０．７１（２）°，Ｚ＝２．Ｄ＿ｃ＝１．４６８ｇ·ｃｍ￣（－３），μ＝１５．９２８ｃｍ￣（－１）（ＭｏＫα），Ｍ＿ｒ＝１４７１，０４，Ｆ（０００）＝７４５，Ｒ＝０．０３１，Ｒ＿ｗ＝０．０３９；对晶体（Ⅱ），α＝１２．７８５（１）Ａ，ｂ＝１３．８５０（３）Ａ，ｃ＝１９．５７１（２）Ａ，α＝８１．０５（３）°，β＝７０．９２（２）°，γ＝７０．６２（３）°，Ｚ＝２，Ｄｃ＝ｌ．４８５ｇ·ｃｍ￣（－３），μ＝１０．４４１ｃｍ￣（－１）（ＭｏＫα），Ｍ＿ｒ＝１３８６．９ｌ，Ｆ（０００）＝７ｌ４，Ｒ＝０．０６５，Ｒ＿ｗ＝０．０７８．测定结果表明，中心稀土离子Ｙｂ￣（３＋）（或Ｙ￣（３＋）直接与３个苦味酸阴离子和２个水分子配位，此水化镱（或钇）苦味酸盐通过水桥氢键与冠醚Ｂｌ５Ｃ５相联而形成一个大的疏水性     

Pd/Al_2O_3 催化合成2,3,5-三甲基氢醌的连续工艺

利用Ｐｄ／Ａｌ２Ｏ３催化剂,采用固定床的连续工艺将２,３,５－三甲基苯醌催化加氢得到高纯度的２,３,５－三甲基氢醌．考察了溶剂对加氢反应的影响,并通过实验确定了加氢工艺条件：２,３,５－三甲基苯醌的空速为０．２７ｇ（ｇｈ）－１,氢分压为０．１ＭＰａ,加氢反应温度为５０℃．同时将Ｐｄ／Ａｌ２Ｏ３与Ｐｔ／Ａｌ２Ｏ３的催化性能进行了比较,发现Ｐｄ／Ａｌ２Ｏ３催化剂在使用过程中选择性上升．     

一氧化碳氧化的钯催化剂研究Ⅰ．钯催化剂性能和反应条件对催化活性的影响

用浸渍法制备了不同担载量的Ｐｄ／Ａｌ＿２Ｏ＿３和Ｐｔ／Ａｌ＿２Ｏ＿３催化剂，在固定床微反中测定了它们催化ＣＯ氧化为ＣＯ＿２的活性。结果表明，催化剂金属含量低于７×１０￣（－５）时，Ｐｄ／Ａｌ＿２Ｏ＿３的活性优于Ｐｔ／Ａｌ＿２Ｏ＿３。催化剂经高温（８００℃）水蒸汽预处理活性下降。稀释用的载体和ＧＨＳＶ在７５０～１５００ｈ￣（－１）范围内对催化活性没有明显影响。     

镍负载量对自然转化催化剂Ni／γ—Al2O3性能的影响

利用常压固定床微反－色谱联装置、Ｘ－射线衍射（ＸＲＤ）以及程序升温还原等分析手段,考察了镍负载量对自热转化催化剂Ｎｉ／γ－Ａｌ２Ｏ３的活性和还原性能的影响。实验结果表明,对于１０００℃下焙烧的模型催化剂Ｎｉ／γ－Ａｌ２Ｏ３,用ＸＲＤ检测均未发现ＮｉＯ（２００）特征峰;而当镍含量达到８．１％时,ＸＲＤ可检测到以尖晶石形式存在的镍。模型催化剂中ＮｉＡｌ２Ｏ４的还原性能低于ＮｉＯ。催化剂中镍的负载量在一     

甲烷氧化偶联Ba－ZrO_2催化剂的研究

发现掺有碱土金属组份的ＺｒＯ２样品形成ＡＺｒＯ３相，其对甲烷氧化偶联反应显示出相当好的催化活性和选择性（其中Ａ＝Ｃａ，Ｓｒ，Ｂａ，尤以Ｂａ为佳）．大量ＢａＣＯ３相的存在有利于进一步提高催化剂的选择性；对于９０ｍｏｌ％Ｂａ－ＺｒＯ２催化剂在７５０℃，６００００ｍｌ·ｇ－１·ｈ－１，ＣＨ４：Ｏ２：Ｎ２＝３．８：１．０：９．０（摩尔比）的条件下，Ｃ２烃选择性为５６．９％，Ｃ２烃得率达１７．２％．讨论了ＢａＣＯ３对几种催化剂的促进作用．     

铜基甲醇合成催化剂的EPR表征

用ＥＰＲ谱法对铜基甲醇合成催化剂作表征。结果表明：在少量Ａｌ￣（３＋）掺杂的ＺｎＯ－Ａｌ＿２Ｏ＿３体系可检测到ｇ＝１．９６０６±０．０００２，△Ｈｐｐ＝２．８Ｇ的顺磁信号，其强度随Ａｌ＿２Ｏ＿３掺杂量增加而增强，当Ａｌ／Ｚｎ～２／１００（原子比）时趋于峰值；而在三组份Ｃｕ－ＺｎＯ－Ａｌ＿２Ｏ＿３和四组份Ｃｕ－ＺｎＯ－Ａｌ＿２Ｏ＿３－Ｓｃ＿２Ｏ＿３催化剂体系中，此顺磁信号基本消失。以上结果为三价金属离子（Ａｌ￣（３＋）、Ｓｃ￣（３＋））在ＺｎＯ晶格掺杂诱生正一价缺位从而有利于Ｃｕ以＋１价态存在的观点，提供了新证据。     

CeO2对CuO／γ—Al2O3,CuO／α—Al2O3催化剂的还原性能和CO …

本文以ＣＯ氧化模式反应考察ＣｕＯ／γ－Ａｌ２Ｏ３,ＣｕＯ／ＣｅＯ２／γ－Ａｌ２Ｏ３,ＣｕＯ／α－Ａｌ２Ｏ３和ＣｕＯ／ＣｅＯ２／α－Ａｌ２Ｏ３催化剂的氧化活性,运用ＴＰＲ技术研究了催化剂的还原性能,结果表明,ＣｅＯ２能提高Ａｌ２Ｏ３负载ＣｕＯ催化剂的ＣＯ氧化活性,抑制ＣｕＡｌ２Ｏ３尖晶石的形成,改善催化剂的热稳定性。     

La0.8Sr0.2MnO3＋λ负载于α,γ—Al2O3上作为燃烧催化剂的研究

Ｌａ０．８Ｓｒ０．２ＭｎＯ３＋λ负载于α,γ－Ａｌ２Ｏ３上作为燃烧催化剂的研究高丽蓉,孙燕华,沈岳年（内蒙古大学化学系,０１００２１,呼和浩特）ＳｔｕｄｉｅｓｏｎＬａ０．８Ｓｒ０．２ＭｎＯ３＋λＬｏａｄｉｎｇｏｎα,γ－Ａｌ２Ｏ３ａｓａＣｏｍｂｕｓｔ...     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.