制定企业标准，为企业发展保驾护航——论富阳市涂布白纸板生产企业制定企业标准的必要性

GB／T103354—2004《涂布纸和纸板涂布白纸板》对富阳市涂布白纸板生产实际存有不适用之处，为符合法律法规和企业自身发展需求，企业必须制定充分反映市场、用户和消费者要求的企业标准。     

溶胶—凝胶法制备SiO_2薄膜

本研究采用ＴＥＯＳ－ＥｔＯＨ－Ｈ２Ｏ－ＨＣｌ体系原料，应用低温合成技术，成功地在玻璃基底上制备了完整透明的ＳｉＯ２薄膜。对合成材料进行了差热—失重分析，Ｘ射线衍射分析，红外透射光谱分析及理化检验。结果表明，无序ＳｉＯ４四面体网络已经形成，薄膜的固体物理状态可控制为晶态、非晶态，并赋予基底优良的理化性能。     

功能覆盖膜对场发射阵列（FEA）电子发射性能的影响

为了寻找适合真空微电子器件的场发射阵列（ＦＥＡ）覆盖材料，我们采用了一系列功能材料作为覆盖膜，薄膜淀积采用离子束辅助淀积（ＩＢＡＤ）以及其它淀积技术。在１０＾－６Ｐａ下测量具有不同覆盖膜的硅ＦＥＡ二极管的Ｉ－Ｖ特性，测量结果表明除Ａｕ和Ｍｏ外，其它覆盖材料都对ＦＥＡ电子发射性能有改进，经ＴａＮ覆盖的ＦＥＡ发射电流最大。由Ｆ－Ｎ曲线估算出有效表面功函数和有效发射面积，从而说明以上所得的实验结果。     

Surface modification of Ti-45Al-8.5 Nb alloys by microarc oxidation to improve high-temperature oxidation resistance

Microarc oxidation(MAO)electrolysis plasma deposition was used to prepare Al_2O_3coatings on Ti-45Al-8.5 Nb alloys to improve high temperature oxidation resistance.The surface and cross-section morphologies before and after high-temperature oxidation,the chemical composition,and the phase identification of the coatings were investigated by scanning electron microscopy(SEM),electron probe microanalyses(EPMA),and X-ray diffraction(XRD).The results show that Al_2O_3coatings with a thickness of approximately 8μm can be obtained on the Ti-45Al-8.5 Nb alloys by MAO for 600 s.The samples with the Al_2O_3coatings exhibited better high-temperature oxidation resistance.A minimal weight gain of only 0.396 g/m~2after 100 h oxidation at 900°C was observed for the coatings formed with a deposition voltage of 400 V and using a duty cycle of 3%.The deposition mechanism of the Al_2O_3coatings and the effect of the MAO parameters are also described.     

Effect of Y_2O_3 content in the pack mixtures on microstructure and oxidation resistance of B–Y modified silicide coating

B–Y modified silicide coatings were prepared on Nb–Si based alloy by pack cementation at 1300 ℃ for 10 h. The effect of Y_2O_3 content in the pack mixtures on microstructure and oxidation resistance of the coatings was investigated. The results show that the four coatings have similar structures, which possess a(Nb,X)Si_2 outer layer and a(Nb,X)_5Si_3 transitional layer. Y_2O_3 content in the pack mixtures has an obvious effect on the Si content in the coating. The mass gains of the coatings prepared with 0.5, 1, 2 and 3 wt% Y_2O_3 in pack mixtures are 2.33, 1.96, 2.05 and 2.86 mg/cm~2 after oxidation at 1250 ℃ for 100 h, respectively. The coating prepared with 1 wt% Y_2O_3 exhibits the best oxidation resistance due to the formation of a dense glass-like borosilicate scale.     

真空管吸收涂层的吸收比对全玻璃真空管的热性能影响的试验分析

选择性吸收涂层是全玻璃真空太阳集热管的重要组成部分，其光学性能直接影响着全玻璃真空太阳集热管的热性能。衡量选择性吸收涂层的最主要参数是涂层光学吸收比，而代表全玻璃真空太阳集热管热性能的参数主要是空晒性能参数及闷晒太阳辐照量。文章通过试验研究了涂层的吸收比对全玻璃真空太阳集热管的空晒性能参数和闷晒太阳辐照量的影响。结果表明全玻璃真空太阳集热管涂层吸收比对闷晒太阳辐照量有明显影响，对空晒性能参数也有影响但不明显。     

金属陶瓷复合涂层技术

金属陶瓷复合涂层技术是优越的现代材料表面处理技术和材料复合技术。对各种金属陶瓷复合涂层技术的主要内容，发展概况和技术特点进行了综述，对各种涂层技术的发展趋势进行了展望。     

高精度金属零件平面的研磨

本文论述的是把经过精车或砺磨的表面粗糙度为0.8～0.4的金属零件平面,在平面研磨机上用涂敷研磨法直接进行细研,可达到0.05～0.025,再用压嵌研磨法进行精研,可达到0.025～0.006。     

IMPACT OF APPLYING BCTMP TO WOOD-FREE LWC ON ITS PERFORMANCE

INTRODUCTIONBleached CTMP (BCTMP) is popular in many commercial paper grades, such as packaging, tissue, uncoated wood-free fine papers. There is a strong economic incentive to substitute BCTMP for kraft pulp in producing wood-free light weight coated paper (LWC). Wood free LWC is used mostly for high-speed heatset web offset (HWSO) color printing. With a low basis weight and also low coat weight, the strength, surface and structural properties of the LWC wood-free paper are al…     

多弧离子镀制备的耐事故燃料包壳铬涂层晶粒结构研究

本文通过从几十微米到几埃的多尺度表征展示了多弧离子镀制备铬涂层的详细结构.经XRD, SEM, FIB, TEM和HRTEM表征，结果显示该涂层是一种多重结构，包括表面上的微米级颗粒、缺陷带钉扎的微米或次微米级液滴、以堆垛层错为晶界的柱状晶、以刃位错和螺型位错为区分的微晶、位错末端的原子畸变以及原子排列无序化的区域.这些结构通过改变涂层的结晶度，影响了晶格常数、表面粗化和FIB溅射裂纹.此外，通过分析HTEM照片，确定了这些堆垛层错和位错的类型.最后，讨论了沉积参数对这些晶粒结构的影响.