Numerical investigation on heat transfer characterization of liquid lithium metal in pipe

Liquid Li metal is a promising nuclear reactor coolant; however, relevant research regarding its heat transfer characteristics remains insufficient. In this study, a steady-state two-dimensional mathematical model is established to describe the heat transfer process of liquid Li in a straight pipe. A numerical analysis is conducted to investigate the effects of inlet velocity, inlet temperature, and wall heat flux on heat transfer in liquid Li. The results indicate the advantage of using liquid Li for improving heat transfer at high inlet temperatures (> 1000 K) compared with using liquid sodium and lead–bismuth eutectic. Considering the mechanism of the outlet radial heat flow model, the ratio of turbulent to molecular diffusion coefficients presents a parabolic distribution along the radius of the pipe. Increasing the inlet velocity, decreasing the inlet temperature, and decreasing the wall heat flux can effectively weaken the dominant role of molecular heat transfer owing to the low Prandtl number of liquid Li. The heat transfer of liquid Li is investigated comprehensively in this study, and the results provide a basis for the practical application of liquid Li as a promising coolant.     

模拟研究和设计高强度低生热聚合物复合材料

利用分子动力学模拟方法研究聚合物复合材料中填料分布、聚合物链性质和体系微观结构对力学强度和动态滞后生热性能的影响.研究结果表明,提高填料分散程度和减少聚合物链末端数量都能有效降低聚合物复合材料的动态滞后生热,聚合物复合材料的力学强度和动态滞后生热随分子链刚性的增加而增加.但是,刚柔嵌段共聚体系的力学强度,在高拉伸状态下,甚至会优于全刚性聚合物体系.在前述研究基础上,笔者设计了一款以填料颗粒为交联点、刚/柔环状链段互穿的三维网络结构复合体系.研究结果表明,新型复合材料与传统聚合物相比,力学性能最高提升640％,生热性能降低40％.模拟研究结果期望能为分析聚合物复合材料的生热机制、设计兼具高力学强度和低生热性能的聚合物复合材料提供理论指导和新的思路.     

三维AoA目标跟踪的二次约束卡尔曼滤波算法

在基于到达角(angle of arrival, AoA)的三维目标跟踪中, 伪线性卡尔曼滤波具有稳定性高和计算复杂度低的优点, 但是严重的偏差问题使其跟踪精度迅速下降。针对该问题, 提出一种二次约束卡尔曼滤波(quadratic constraint Kalman filter, QCKF)算法。首先引入涉及所有观测噪声项的增广矩阵, 然后建立与线性卡尔曼滤波等价的目标函数并且附加含有二次项的约束条件, 以此降低偏差影响, 实现更准确的状态更新。QCKF算法采用广义特征值分解求解约束优化问题, 无法直接通过状态更新表达式推导其协方差矩阵, 因此利用约束条件以及矩阵扰动方法完成协方差矩阵更新。仿真分析表明, QCKF算法相较于其他非线性滤波算法具有更优的跟踪性能, 不仅在低噪声条件下可达到后验克拉美罗下界, 而且当噪声严重时能够显著降低跟踪误差, 并且计算开销不高。     

CAPM模型在加密货币市场的适用性检验

为解决DCEP(央行数字货币)发行后可能遇到的风险,加密货币市场的系统风险和超额收益之间的关系,利用资产定价模型(CAPM)对加密货币市场的适用性进行检验,采用定义式和回归方程两种方法估计加密货币i的beta系数,对beta系数进行时间序列回归,横截面回归,发现参数估计不显著,得到CAPM模型不能很好的解释加密货币市场风险和收益之间的关系,适用性不强的结果.     

一种改进的基于人体静电冲击模型应力的瞬态功率模型

提出一种改进的基于人体静电冲击模型(Human Body Model, HBM)应力的瞬态功率模型。利用HSPICE仿真软件, 模拟MOS管遭受的HBM应力, 得到对应的等效直流电压。HBM电路的预充电电压与MOS管对应的等效直流电压值的散点图表明, 两者保持线性关系, 并通过拉普拉斯变化得到证明。与现有的瞬态功率模型相比, 改进后的模型降低了在HBM应力作用下的计算复杂度, 可以更加简便地从统计学上预测MOS管栅氧击穿的发生, 给HBM冲击作用下MOS管栅氧化层可靠性的评估提供参考。     

烃族组成对柴油储存安定性影响研究

针对柴油储存过程中质量衰变问题，利用典型柴油样品，开展烃化合物对中国成品柴油储存安定性影响规律研究。烃组成分析测定结果表明，柴油中总芳烃和链烷烃之间存在很强的相关性（相关系数为0.90）。综合采用相关分析、逐步线性回归等方法，建立了安定性指标与烃组成的关联模型，拟合验证表明模型可靠，可以直接用于柴油储存安定性预测；研究确定了柴油储存安定性的主要影响物质，按照对储存安定性指标影响的严重程度将烃类物质分为三个等级，其中苊烯和三环芳烃对柴油质量衰变影响最大，链烷烃对十六烷值和热值影响最大。     

Uncoupled PID Control of Coupled Multi-Agent Nonlinear Uncertain systems

In this paper, PID (proportional-integral-derivative) controllers will be designed to solve the tracking problem for a class of coupled multi-agent systems, where each agent is described by a second-order high-dimensional nonlinear uncertain dynamical system, which only has access to its own tracking error information and does not need to communicate with others. This paper will show that a 3-dimensional manifold can be constructed based on the information about the Lipschitz constants of the system nonlinear dynamics, such that whenever the three parameters of each PID controller are chosen from the manifold, the whole multi-agent system can be stabilized globally and the tracking error of each agent approaches to zero asymptotically. For a class of coupled first-order multi-agent nonlinear uncertain systems, a PI controller will be designed to stabilize the whole system.     

Mechanical and corrosion properties of low-carbon steel prepared by friction stir processing

Low-carbon steel plates were successfully subjected to normal friction stir processing(NFSP) in air and submerged friction stir processing(SFSP) under water, and the microstructure, mechanical properties, and corrosion behavior of the NFSP and SFSP samples were investigated. Phase transformation and dynamic recrystallization resulted in fine-grained ferrite and martensite in the processed zone. The SFSP samples had smaller ferrites(5.1 μm), finer martensite laths(557 nm), and more uniform distribution of martensite compared to the NFSP samples. Compared to the base material(BM), the microhardness of the NFSP and SFSP samples increased by 19.8% and 27.1%, respectively because of the combined strengthening effects of grain refinement, phase transformation, and dislocation. The ultimate tensile strengths(UTSs) of the NFSP and SFSP samples increased by 27.1% and 38.7%, respectively. Grain refinement and martensite transformation also improved the electrochemical corrosion properties of the low-carbon steel. Overall, the SFSP samples had better mechanical properties and electrochemical corrosion resistance than the NFSP samples.     

基于空地协同采样的植被覆盖度随机森林估算方法

基于无人机高光谱影像, 建立地形复杂地区植被覆盖度的非参数随机森林回归估算模型。为获得构建随机森林模型所需的足够数量的训练样本, 利用低空无人机搭载的光学相机, 在从地面难以到达的山地、水域和植被茂密区, 通过垂直拍摄获得厘米分辨率的航拍影像, 作为对地面样方采样的补充。首先计算地面数码相机照片和无人机可见光影像的红绿蓝植被指数(red-green-blue vegetation index, RGBVI), 然后使用大津分割法提取样方的植被覆盖信息, 得到构建模型所需的训练样本。在此基础上, 基于2018年8月16—18日在内蒙古自治区察右中旗油娄沟矿区获取的GaiaSky-mini2无人机高光谱影像数据, 利用递归特征消除算法优选参与随机森林回归的特征变量集, 利用空地协同获取的训练样本构建植被覆盖度的随机森林回归估算模型。该模型在测试集上的确定系数R2为0.923, 均方根误差为0.087, 优于常用的像元二分模型, 可用于矿区植被动态信息的精细化监测。     

装配式夹芯复合墙板抗震性能模拟分析及优化设计

为了研究装配式陶粒混凝土夹芯复合墙板的抗震性能,本文共建立了4个有限元模型,主要包括普通混凝土夹芯复合墙板、陶粒混凝土夹芯复合墙板、纤维增强陶粒混凝土夹芯复合墙板以及实心陶粒混凝土墙板.通过计算结果与实验结果对比分析,验证了计算模型的正确性.采用ABAQUS模拟求解的分析方法,分别研究了4种墙板的滞回性能、延性、承载及变形能力以及刚度退化等性能.结果表明:夹芯复合墙板表现出相对良好的抗震性能;两侧核心承重部件材料对墙板整体抗震性能影响较大;纤维增强陶粒混凝土表现出较好的延性,整体抗震性能相对较好,具有一定推广价值.另外,发展夹芯节能墙板也符合国家提倡的绿色、节能、保温等发展政策.