圆形均匀带电薄板电场的数值积分和可视化

利用均匀带电圆环在直角坐标系中的电势和电场强度的2个分量的公式,推导了均匀带电圆形薄板的电势和电场强度的2个分量的积分公式.将积分公式无量纲化,采用数值积分法计算电势和场强的值,绘制曲面、二维等势线和电场线.     

Side-Channel Attacks in a Real Scenario

Existing Side-Channel Attacks(SCAs) have several limitations and, rather than to be real attack methods,can only be considered to be security evaluation methods. Their limitations are mainly related to the sampling conditions, such as the trigger signal embedded in the source code of the encryption device, and the acquisition device that serves as the encryption-device controller. Apart from it being very difficult for an attacker to add a trigger into the original design before making an attack or to control the encryption device, there is a big gap in the capacity of existing SCAs to pose real threats to cipher devices. In this paper, we propose a new method, the sliding window SCA(SW-SCA), which can be applied in scenarios in which the acquisition device is independent of the encryption device and for which the encryption source code requires no trigger signal or modification. First,we describe the main issues in existing SCAs, then we theoretically analyze the effectiveness and complexity of our proposed SW-SCA —a method that can incorporate a sliding-window mechanism into almost all of the existing non-profiled SCAs. The experimental results for both simulated and physical traces verify the effectiveness of the SW-SCA and the appropriateness of its theoretical complexity.     

The Life-Cycle Model with Optimal Retiring Age and Simulation

In this paper, a life-cycle model with retirement is set up to study how an individual chooses the optimal retiring age on account of wage growth rate, longevity and healthy state. It is proved that there exists optimal retiring age under given conditions. The numerical simulations are given to show how wage growth rate, longevity and healthy state affect retiring age.     

仿生非光滑花纹沟对轮胎抗滑水性能的影响

以205/55R16乘用车轮胎为研究对象,采用计算流体动力学建立了考虑胎面花纹变形的轮胎滑水分析模型;以气-液二相流数值模型分析了轮胎的滑水性能,并将临界滑水速度仿真值与NASA滑水速度预测值及轮胎发生滑水时力平衡下的速度进行对比.在此基础上,引入仿生减阻理念,研究了夹角为60°、高度为0.6mm的仿生对称V形结构对花纹沟排水量和水流阻力的影响,并将其结构特征信息等效移植到接地区轮胎花纹沟底,进行了仿生花纹轮胎的滑水性能分析.结果表明:所建滑水分析模型可用来分析轮胎滑水时的流体运动特性;相对原花纹轮胎,仿生非光滑花纹沟轮胎通过提高接地区花纹沟内水流速度,降低了胎面动水压力,提高了临界滑水速度.     

三维打印器件后处理液研究

分析了不同的填充强化剂(后处理A液)、不同的后处理B液基料、后处理B液中水性环氧乳液的掺量及后处理液浸泡时间对石膏基打印器件耐水性、抗压强度、尺寸偏差、表面微观结构的影响.结果表明:经纳米硅超硬固化剂处理后的打印器件抗压强度大幅提高,纳米硅超硬固化剂最适宜作为后处理A液;水性聚氨酯乳液PU-202B最适宜作为后处理B液的基料;后处理B液中加入水性环氧乳液,处理后打印器件的抗压强度增加、吸水率降低,但水性环氧乳液含量增加到一定程度后会出现尺寸偏差;后处理A、B液最佳浸泡时间分别为130 s和35 s;先浸泡后处理A液、后浸泡后处理B液的打印器件具有抗压强度高、吸水率小、表面较光滑、不脱粉等优良性能.     

兰州黄河岸边卵石层大吨位桩基自平衡法试验研究

对兰州深安黄河大桥进行桩基自平衡法试验。在对黄河岸边的岩土层进行桩基试验时,对桩基的极限侧阻力和端阻力标准值的取值提出建议,并在兰州地区进行自平衡法桩基试验时,对桩基侧摩阻力的取值提出建议。     

基于蚁群系统的仿真机器人足球攻防转换策略

为了提高机器人足球的整体攻防能力,在动态攻防转换策略中建立了基于蚁群系统的混合通信机制,既增强了足球机器人的协作能力,又避免了足球机器人陷入冲突或任务死锁状态,增加了攻防转换的灵活性。在该通信机制的基础上采用攻防区域划分的方法,以球的位置为驱动信息,通过信息素来确定变换队形。在FIRA仿真平台中实验表明,基于蚁群混合通信机制的动态攻防转换策略使得仿真足球机器人在比赛过程中表现出更优异的性能,改善了球队的整体攻防能力,可有效应用于机器人足球比赛中。