Effect of Co substitution on the structural,dielectric and optical properties of KBiFe2O5

Cobalt (Co)-modified brownmillerite KBiFe2O5 (KBFO; [KBiFe2(1?x)Co2xO5 (x = 0, 0.05)]) polycrystalline is synthesized following the solid-state reaction route. Rietveld refinement of X-ray diffraction data confirmed the phase purity of KBFO and KBiFe1.9Co0.1O5 (KBFCO). The optical bandgap energy (Eg) of KBFO decreased from 1.59 to 1.51 eV because of Co substitution. The decrease in bandgap can be attributed to the tilting of the Fe–O tetrahedral structure of KBFCO. The observed room-temperature Raman peaks of KBFCO shifted by 3 cm?1 toward a lower wavenumber than that of KBFO. The shift in Raman active modes can be attributed to the change in the bond angles and bond lengths of the Fe–O tetrahedral structure and modification in response to oxygen deficiency in KBFO because of Co doping. Compared with that of KBFO, the frequency-dependent dielectric constant and dielectric loss of KBFCO decrease at room temperature, which is a con-sequence of the reduction in oxygen migration and modification in response to vibrational modes present in the sample.     

Corrosion behavior of cold-rolled and post heat-treated 316L stainless steel in 0.9wt%NaCl solution

The effect of cold rolling and post-rolling heat treatment on the microstructural and electrochemical properties of the 316L stainless steel was investigated.Two-pass and four-pass cold-rolled stainless steel specimens were heat-treated by annealing at 900℃followed by quenching in water.During the cold rolling,the microstructure of the as-received specimen transformed from austenite to strain-inducedα′-martensite due to significant plastic deformation that also resulted in significant grain elongation(i.e.,~33%and 223%increases in the grain elongation after two and four rolling passes,respectively).The hardness of the heat-treated as-received specimen decreased from HV 190 to 146 due to the recovery and recrystallization of the austenite grain structure.The cyclic polarization scans of the as-rolled and heat-treated specimens were obtained in 0.9wt%NaCl solution.The pitting potential of the four-pass rolled specimen was significantly increased from 322.3 to 930.5 mV after post-rolling heat treatment.The beneficial effect of the heat treatment process was evident from~10-times-lower corrosion current density and two-orders-of-magnitude-lower passive current density of the heat-treated specimens compared with those of the as-rolled specimens.Similarly,appreciably lower corrosion rate(3.302×10^?4mm/a)and higher pitting resistance(1115.5 mV)were exhibited by the postrolled heat-treated specimens compared with the as-rolled 316L stainless steel specimens.     

Dielectric relaxation and conduction mechanism in Aurivillius ceramic Bi5Ti3FeO15

For this study, we synthesized Aurivillius Bi5Ti3FeO15 ceramic using the generic solid-state reaction route and then performed room-temperature X-ray diffraction to confirm that the compound had a single phase with no impurities. The surface morphology of the prepared sample was observed to contain microstructural grains approximately 0.2–2 μm in size. The dielectric properties of the sample were determ-ined as a function of frequency in a range of approximately 100 Hz to 1 MHz at various temperatures (303 K ≤ T ≤ 773 K). Nyquist plots of the impedance data were found to exhibit a semi-circular arc in the high-temperature region, which is explained by the equivalent electrical circuit (R1C1)(R2QC2), where R1 and R2 represent the resistances associated with the grains and grain boundaries, respectively, C1 and C2 are the re-spective capacitances, and Q is the constant phase element (CPE), which accounts for non-Debye type of behavior. Our results indicate that both the resistance and capacitance of the grain boundaries are more prominent than those of the grains. The alternating current (ac) conductiv-ity data were analyzed based on the Jonscher universal power law, which indicated that the conduction process is dominated by the hopping mechanism. The calculated activation energies of the relaxation and conduction processes were very similar (0.32 to 0.53 eV), from which we conclude that the same type of charge carriers are involved in both processes.     

不完全契约视角下社会资本参与社区养老模式研究

本文应用不完全契约理论,以社区养老项目净收益最大为优化目标,构建社会资本参与社区养老模式决策的理论模型;通过对已建理论模型系统地参数分析,发现项目目标人群的政府依赖程度和社会资本的资产运作能力是影响社会资本参与社区养老模式决策的关键因素,提出了不同情形下的模式选择方案;并进一步从现实障碍出发,以了解项目目标人群的政府依赖程度和评估与提升社会资本的资产运作能力为目标,从管理机制、社会资本及公众三个方面提出具体的政策建议以优化社会资本参与社区养老的模式选择。     

Processing and characterization of the microstructure and mechanical properties of Al6061–TiB2 composite

In the present research, aluminum metal matrix composites were processed by the stir casting technique. The effects of TiB2 rein-forcement particles, severe plastic deformation through accumulative roll bonding (ARB), and aging treatment on the microstructural charac-teristics and mechanical properties were also evaluated. Uniaxial tensile tests and microhardness measurements were conducted, and the micro-structural characteristics were investigated. Notably, the important problems associated with cast samples, including nonuniformity of the rein-forcement particles and high porosity content, were solved through the ARB process. At the initial stage, particle-free zones, as well as particle clusters, were observed on the microstructure of the composite. However, after the ARB process, fracturing phenomena occurred in brittle ceramic particles, followed by breaking down of the fragments into fine particles as the number of rolling cycles increased. Subsequently, com-posites with a uniform distribution of particles were produced. Moreover, the tensile strength and microhardness of the ARB-processed com-posites increased with the increase in the reinforcement mass fraction. However, their ductility exhibited a different trend. With post-deforma-tion aging treatment (T6), the mechanical properties of composites were improved because of the formation of fine Mg2Si precipitates.     

带交换和跳跃的一维双向自驱动系统的仿真研究

自驱动粒子系统在生物系统、交通运输系统领域具有广泛的应用价值.本文提出了一维双向自驱动粒子模型,在模型中考虑粒子的跳跃、粒子间的换位等行为.运用模拟仿真方法分别讨论了左右向移动的粒子密度比、换位概率、跳跃率对系统流量的影响,结果表明:两种粒子的比例越接近,系统流率越大;在密度位于中段区域时(0.3<ρ<0.8),粒子跳跃概率越高,系统流率就越大;对向粒子交换概率越大,系统流率越大,流率-密度曲线由非单调转变为单调递增;系统没有出现回滞现象.这些研究结果有助于理解非平衡态系统的一些重要性质.     

条件故障下3-元n-立方体的容错分析

研究了条件边故障下3-元n-立方体中较大连通分支点的数目，进而证明了3-元n-立方体是(4n－6)-条件边故障强Menger边连通的。最后通过一个反例说明该结果是最优的。     

海洋放射性现场探测谱仪的机械优化设计

为提高海洋放射性现场探测NaI(Tl)谱仪的探测性能，采用蒙特卡罗仿真和统计计算方法，研究和分析谱仪封装、材料和尺寸等机械设计对探测性能的影响规律。综合考虑伽马射线衰减和密封、耐压及耐腐蚀等要求，开展谱仪的机械优化设计和海上现场检测实验。优化谱仪达到了对40K最小探测活度约0.30 Bq/L，现场测量相对误差为0.45%。该研究对海洋放射性现场探测谱仪的性能优化设计和现场应用具有重要的指导意义。     

集群政务专网业务需求分析与估算

建立了集群政务专网的业务需求预测模型,将政府部门分为业务量较大、中等和较小3个类别,分别分析和计算了其对应的业务带宽需求,为合理进行政务专网网络规划和建设奠定了理论基础。