基于多材质复合管柱的裸眼井壁支撑工艺及应用

已完钻超深裸眼水平井侧钻技术是经济、高效开发油藏剩余油的主要手段之一，传统的磨铣钢套管开窗侧钻技术存在下入摩阻大、磨铣耗时长导致开窗失败等问题。为此，提出了基于多材质复合管柱的超深水平井裸眼井壁支撑工艺，结合中国西北油田已完钻超深裸眼水平井井况，首先，提出了基于“铝合金+碳钢”的多材质复合管柱组合及设计方法；其次，开展了基于管柱实物屈曲实验数据的管柱临界屈曲载荷计算模型适用性评价，并优选出了适合于“铝合金+碳钢”多材质复合管柱的屈曲临界载荷计算模型；最后，研究了综合考虑管柱扭矩、摩阻、刚性、井眼条件、管柱强度及材质的多材质复合管柱下入性分析方法，并利用下入性分析软件对西北油田顺北X1井、X2井、X3井、X4井复合管柱进行了下入可行性评价。该方法在X1井和X2井得到成功应用，进一步论证了该工艺现场应用的可行性。研究成果可为超深水平井裸眼井壁支撑的复合管柱设计和下入可行性评价提供理论参考。     

Blockage of the NLRP3 inflammasome by MCC950 improves anti-tumor immune responses in head and neck squamous cell carcinoma

The NLRP3 inflammasome is a critical innate immune pathway responsible for producing active interleukin (IL)-1β, which is associated with tumor development and immunity. However, the mechanisms regulating the inflammatory microenvironment, tumorigenesis and tumor immunity are unclear. Herein, we show that the NLRP3 inflammasome was over-expressed in human HNSCC tissues and that the IL-1β concentration was increased in the peripheral blood of HNSCC patients. Additionally, elevated NLRP3 inflammasome levels were detected in tumor tissues of Tgfbr1/Pten 2cKO HNSCC mice, and elevated IL-1β levels were detected in the peripheral blood serum, spleen, draining lymph nodes and tumor tissues. Blocking NLRP3 inflammasome activation using MCC950 remarkably reduced IL-1β production in an HNSCC mouse model and reduced the numbers of myeloid-derived suppressor cells (MDSCs), regulatory T cells (Tregs) and tumor-associated macrophages (TAMs). Moreover, inhibiting NLRP3 inflammasome activation increased the numbers of CD4⁺ and CD8⁺ T cells in HNSCC mice. Notably, the numbers of exhausted PD-1⁺ and Tim3⁺ T cells were significantly reduced. A human HNSCC tissue microarray showed that NLRP3 inflammasome expression was correlated with the expression of CD8 and CD4, the Treg marker Foxp3, the MDSC markers CD11b and CD33, and the TAM markers CD68 and CD163, PD-1 and Tim3. Overall, our results demonstrate that the NLRP3 inflammasome/IL-1β pathway promotes tumorigenesis in HNSCC and inactivation of this pathway delays tumor growth, accompanied by decreased immunosuppressive cell accumulation and an increased number of effector T cells. Thus, inhibition of the tumor microenvironment through the NLRP3 inflammasome/IL-1β pathway may provide a novel approach for HNSCC therapy.     

基于回波预处理和相参积累的C&I干扰抑制算法

C&I(chopping and interleaving)干扰是一种针对线性调频(linear frequency modulation, LFM)雷达的典型干扰样式, 干扰子信号调频斜率与雷达发射信号相同, 利用信号处理工具分离真实回波与干扰信号难度较大。针对该问题, 以LFM相参雷达抗自卫式C&I干扰为背景, 提出基于回波预处理和相参积累的干扰抑制算法。根据估计的回波时延, 设置距离窗截取受干扰回波段, 在此基础上, 通过对回波预处理, 改变不同重复周期内假目标的快时间位置分布, 通过相参积累实现干扰抑制。仿真试验表明, 所提算法能够有效抑制强干扰背景下的C&I干扰, 干扰抑制后真实目标检测概率大幅提高, 虚假目标数量明显减少。     

Geochemistry of Clayey Aquitard Pore Water as Archive of Paleo-Environment,Western Bohai Bay

The record of paleo-environment in clayey aquitard pore water is much more effective relative to aquifer groundwater owing to the low permeability of clayey aquitard. Oxygen-18 (18O), deuterium (D), an...     

磁流变液中磁性颗粒成链与团聚的临界特征分析

热运动对纳米级磁流变液系统的颗粒团聚行为和宏观流变特性扰动影响不可忽视.为研究施加外磁场后系统微结构与热运动间的关系，探讨在不同颗粒粒径情况下热运动能量在系统总能量中的占比.采用CCD设计方法，分析Monte Carlo仿真获取的颗粒位形信息，生成关于外磁场磁感应强度、颗粒粒径和体积分数的系统热耦合系数<λ>回归模型;成链团聚的临界颗粒粒径计算值比文献经验值高出约23%，证实在考虑系统内多因素的综合影响下，纳米级磁流变液具有更严格的流变现象临界发生条件.     

基于脉内LFM-Costas频率步进的抗间歇采样干扰方法

线性调频(linear frequency modulation, LFM)分段脉压对抗间歇采样干扰时,子脉冲顺序步进,使得采样子脉冲与相邻子脉冲脉压后,残余信号积累从而形成干扰带;干扰抑制时信号不连续采样,产生谐波分量。针对这两个问题,提出一种基于脉内Costas频率步进的LFM波形抗间歇采样干扰方法。该波形综合LFM和Costas编码的优点,具有理想图钉型的模糊函数,不仅可以抑制干扰带,还可以大大降低谐波分量,最终提高抗干扰性能。理论推导和仿真分析验证了该方法的有效性。     

基于养生理念的小区生态园林植物群落配置设计——以池州和泰星城小区为例

首先论述了小区生态园林植物配置的原则,提出养生保健理念配置具体手法,具体调查了池州市和泰星城小区绿化树种的选择以及群落配置,进行了系统分析评价,借以探讨池州养生宜居小区的建设。     

三维打印器件后处理液研究

分析了不同的填充强化剂(后处理A液)、不同的后处理B液基料、后处理B液中水性环氧乳液的掺量及后处理液浸泡时间对石膏基打印器件耐水性、抗压强度、尺寸偏差、表面微观结构的影响.结果表明:经纳米硅超硬固化剂处理后的打印器件抗压强度大幅提高,纳米硅超硬固化剂最适宜作为后处理A液;水性聚氨酯乳液PU-202B最适宜作为后处理B液的基料;后处理B液中加入水性环氧乳液,处理后打印器件的抗压强度增加、吸水率降低,但水性环氧乳液含量增加到一定程度后会出现尺寸偏差;后处理A、B液最佳浸泡时间分别为130 s和35 s;先浸泡后处理A液、后浸泡后处理B液的打印器件具有抗压强度高、吸水率小、表面较光滑、不脱粉等优良性能.