壳聚糖固定化木瓜蛋白酶的制备及性质

以壳聚糖为载体 ,戊二醛为交联剂制备固定化木瓜蛋白酶 .研究了固定化时间、温度、pH值、给酶量和戊二醛浓度对固定化木瓜蛋白酶活力的影响 ,结果表明 :木瓜蛋白酶最佳固定化条件是给酶量为每克载体 10mg ,戊二醛浓度0 .5 % ,pH7.5 ,室温下 (2 5℃ )反应 10h .所制备的固定化木瓜蛋白酶的最适pH8.0 ,最适温度 70℃ ,与溶液酶相比 ,固定化酶的热稳定性显著提高     

壳聚糖固定化果胶酶的制备及其酶学性质研究

以1％壳聚糖与5％戊二醛交联8h制得交联壳聚糖载体,1g载体固定10mg的果胶酶,载体先与酶液缓慢振荡混合30min后,在固定化体系（pH3．4,4℃）中固定反应12h,该条件下制得的固定化酶强度大韧性好。酶活力回收率高达56．31％;固定化酶的最适温度50℃,最适pH3．4,Km^app值为5．42mg·mL^-1,连续使用7次后,酶活力还保留70．45％以上,具有较好的操作稳定性。     

壳聚糖固定化木瓜蛋白酶的制备及性质

以壳聚糖为载体，戊二醛为交联剂制备固定化木瓜蛋白酶，研究了固定化时间、温度、pH值、给酶量和戊二醛浓度对固定化木瓜蛋白酶活力的影响，结果表明：木瓜蛋白酶最佳经条件是给酶量为每克载体10mg，戊二醛浓度0.5%，pH7.5，室温下（25℃）反应10h。所制备的固定化木瓜蛋白酶的最适pH8.0，最适温度70℃，与溶液酶相比，固定化酶的热稳定性显著提高。     

壳聚糖固定化蚯蚓纤溶酶及其性质

以壳聚糖为载体,戊二醛为交联荆,用吸附交联法固定蚯蚓纤溶酶,对蚯蚓纤溶酶的固定化条件及固定化酶的各种性质进行了研究,确定了酶固定的最适条件:1 g用pH为6.5的磷酸盐缓冲液浸泡的壳聚糖载体与5 mL体积分数为1%戊二醛在25℃交联8 h,充分洗去戊二醛之后,加入蚯蚓纤溶酶13 U,4℃吸附6 h,充分洗去未交联的游离酶,酶活力回收最高大约为63%,固定化酶的比活为0.082 U/mg.固定化酶,游离酶的最适温度均为50℃,游离酶的最适pH值为8.5,而固定化酶的最适pH值为8.0,固定化酶的热稳定性,pH稳定性均比游离酶有所提高,游离酶、固定化酶都能水解纤维蛋白原和纤维蛋白,固定化酶不再水解BSA.     

壳聚糖固定化云芝漆酶的制备及特性

以壳聚糖为载体,戊二醛为交联剂制备固定化漆酶,测定了不同戊二醛浓度、交联时间、给酶量以及固定化时间对固定化漆酶活性的影响。结果表明,固定化反应的最佳条件为戊二醛浓度5%,交联时间8h,给酶量20mg/g载体,固定化时间6h,在此条件下制备的固定化漆酶酶活性保持率为52.2%。此固定化漆酶具有最大活性时的溶液pH值在4.5,相比于自由漆酶的最佳pH值5.0,其向酸性偏移;与自由漆酶相比,固定化酶有很好的稳定性和可重复使用性。     

固定化乙酰胆碱脂酶的研究

以戊二醛为交联剂,将乙酰胆碱脂酶交联固定到硅胶载体上,研究了影响固定化酶的主要因素．通过酶活力的测定,确定了最佳戊二醛浓度、pH值、固定化时间、酶用量、固定化酶的最适作用温度、pH值、酶的稳定性及其回收率．结果表明：戊二醛浓度为0．5％,pH值为8．0,固定3．0h,酶与载体比例为30mg／g可制备良好的功能化载体．固定化乙酰胆碱脂酶最适作用温度和pH范围分别为40℃和6．0～9．0．重复使用10次固定化酶,回收率约为70％．     

阴离子交换树脂固定化果胶酶研究

以阴离子交换树脂为载体、戊二醛为交联剂,对果胶酶进行固定化分析,探讨了温度、pH值、时间、加酶量、戊二醛浓度、交联温度、交联时间对果胶酶固定化效果的影响,同时对固定化果胶酶的酶学特性进行研究.结果表明,果胶酶最佳固定化条件为:温度为40℃,pH值为5.5,固定化6 h,加酶量为0.75 mL/g树脂,戊二醛体积分数为0.1%,交联温度为4℃,交联时间4 h.在此条件下,固定化果胶酶的酶活回收率可达到80%以上.酶学特性试验表明,固定化果胶酶最适温度为60℃,最适pH值为4.0,具有较好的操作稳定性.     

多胺化壳聚糖载体固定化漆酶及其性质研究

以多胺化壳聚糖为载体,戊二醛为交联剂固定化白毒鹅膏菌漆酶,研究了最佳固定化条件及固定化酶的部分性质.结果表明,戊二醛浓度2％,交联时间14h,固定化时间6h,给酶最70mg/g载体时同定化效果最佳,酶活力可达64.3 U/g.此固定化漆酶的Km为8.73mmol· L-1;最适pH值4.2,较自由漆酶向酸性偏移;最适反...     

修饰性载体固定化漆酶

采用壳聚糖铜固定化和交联酶聚集体的方法固定化漆酶.探索了固定化前后漆酶的最适温度、pH,热稳定性和金属离子对其活性的影响,交联漆酶聚集体制备的条件.结果为:游离漆酶的最适温度是20℃,最适pH是4.6;壳聚糖铜固定化漆酶的最适温度是25℃,最适pH是4.0;交联漆酶聚集体的最适温度是15℃,最适pH是3.6.固定化后漆酶的热稳定性提高,不同金属离子影响固定化漆酶的活性,其中K+的激活作用尤为明显.制备交联漆酶聚集体最适戊二醛浓度为1%,最适交联时间是2 h.     

甲醛改性壳聚糖固定酪氨酸酶的工艺研究

壳聚糖珠经戊二醛活化,再用甲醛对其表面进行改性后,用于固定酪氨酸酶。研究了戊二醛体积分数、甲醛体积分数、pH值以及给酶量对壳聚糖固定化酪氨酸酶活力的影响。同时,研究了壳聚糖固定化酪氨酸酶的性能。结果表明:甲醛改性壳聚糖固定化酪氨酸酶的最佳工艺条件为:戊二醛的体积分数为3％,溶液pH=8．0,甲醛体积分数为5％,给酶量为105 U／g载体。载体与戊二醛交联后,载体经甲醛处理再与酶反应,得到的固定化酶显示出很高的使用稳定性。     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.