生淀粉糖化菌NL—3的发酵条件

以黑曲霉（Ａｓｐｅｒｇｉｌｕｓｎｉｇｅｒ）５２３原生质体为对象,经激光、紫外线和亚硝基胍复合诱变,选育出高产生淀粉糖化酶突变株黑曲霉ＮＬ３,其生淀粉酶活力为１５６Ｕ／ｍｌ．产酶最适培养条件为：起始ｐＨ４５,３０℃,９６ｈ产酶量达最高．Ｋ＋,Ｍｇ２＋对ＮＬ３产生淀粉糖化酶有促进作用;Ｚｎ２＋对产酶有抑制作用．酶的最适作用条件为：以玉米淀粉为底物的最适温度５０℃,最适ｐＨ４５;以甘薯淀粉、马铃薯淀粉为底物时最适温度６０℃,最适ｐＨ４０～４５．酶在６０℃保温１５ｍｉｎ,玉米淀粉为底物时酶剩余活力为８０％;甘薯淀粉、马铃薯淀粉为底物时酶剩余活力为９８％．     

棒曲霉UA—2木聚糖酶的蔗渣固态发酵

棒曲霉（Ａｓｐｅｒｇｉｌｕｓｃｌａｖａｔｕｓ）ＵＡ－２固态发酵蔗渣产木聚酶的培养基为每克蔗渣加营养液５ｍｌ，初始ｐＨ８．５．营养液的适宜组成为每升含：ＮＨ４ＮＯ３１０ｇ、Ｋ２ＨＰＯ４６ｇ、ＭｇＳＯ４·７Ｈ２Ｏ０．７５ｇ、ＣａＣｌ２０．７５ｇ、ＦｅＳＯ４·７Ｈ２Ｏ１１．２５ｍｇ、ＭｎＳＯ４·Ｈ２Ｏ３．７５ｍｇ、ＺｎＳＯ４３．０ｍｇ、ＣｏＣｌ２４．５ｍｇ．在上述培养基中接入其湿重１０％（Ｗ／Ｗ）的新鲜的ＵＡ－２种子曲，２８℃培养１０８ｈ，其木聚糖酶，滤纸降解酶和羧甲基纤维素酶的活力分别为２６９５．６、２８．５和４２．７ｕ／ｇ蔗渣．酶反应的最适ｐＨ５．０，最适温度５０℃；在ｐＨ４．０～１１．０内酶活性十分稳定．５０℃保温１ｈ，酶活剩余５５％，８℃下放置２３ｄ，活力几乎不变．磷酸盐，半胱氨酸对酶有激活作用，ＥＤＴＡ和对氯汞本甲酸对酶有抑制作用     

拟除虫菊酯对昆虫 ATPase 的影响研究

美洲大蠊中枢神经系统ＡＴＰａｓｅ活力测定的最适反应条件是：对于Ｎａ＋－Ｋ＋－ＡＴＰａｓｅ,蛋白质含量５～１０μｇ,ｐＨ值７．０,反应温度３０℃,反应时间１５ｍｉｎ．Ｋｍ和Ｖｍａｘ分别为５．３８×１０－３ｍｏｌ／Ｌ和１４３．７５ｎｍｏｌ／ｍｉｎ·ｍｇ－１．Ｃａ２＋－Ｍｇ２＋－ＡＴＰａｓｅ基本相同,只是ｐＨ值为７．４,Ｋｍ和Ｖｍａｘ分别为２．６４×１０－４ｍｏｌ／Ｌ和４６．２８ｎｍｏｌ／ｍｉｎ·ｍｇ－１．初步研究了氯氰菊酯及氰戊菊酯的不同异构体对ＡＴＰａｓｅ的影响,结果显示均对ＡＴＰａｓｅ有不同程度的抑制,与生测结果不完全一致．     

枣快速繁殖技术研究

通过三年对枣树组织培养的研究和实践应用，结果表明，适宜的灭菌时间为７５％的乙醇５．７ｓ，０．１％升汞１０ｍｉｎ。适宜的激素配比为６－ＢＡ３４ｍｇ／Ｌ＋ＮＡＡ０．０１ｍｇ／Ｌ，适宜生根的激素为ＩＢＡ０．４－０．６ｍｇ／Ｌ。     

拟除虫菊酯对昆虫ATPse的影响研究

美洲大蠊中枢神经系统ＡＴＰａｓｅ活力测定的最适应条件是：对于Ｎａ＋Ｋ＾＋－ＡＴＰａｓｅ,蛋白质含量５－１０μｇ,ｐＨ值７．０,反应温度３０℃,反应时间１５ｍｉｎ．Ｋｍ和Ｖｍａｘ分别为５．３８＊１０＾－３ｍｏｌ／Ｌ和１４３．７５ｎｍｏｌ／ｍｉｎ．ｍｇ＾－１,Ｃａ＾２＋－Ｍｇ＾２＋－ＡＴＰａｓｅ基本相同。     

紫外诱变原生质体选育碱性蛋白酶高产菌株的研究──1出发菌株的筛选及产酶条件的研究

从土壤中筛选到一株嗜碱性地衣芽孢杆菌（Ｂａｃｉｌｌｕｓｌｉｃｈｅｎｉｆｏｒｍｉｓ）５３－Ａ６．，该菌株能在ｐＨ１０以上６０℃的环境中良好生长，４５℃ｐＨ９～１２的条件下均可产生活力较高的碱性蛋白酶。酶反应的最适条件：６０℃，ｐＨ１０～１１，在ｐＨ８．５～１１之间较稳定。６０℃保温１ｈ剩余酶活在２０％以上。     

环糊精葡萄糖基转移酶在壳聚糖上的固定化

以甲醛作为活化剂将环糊精葡萄糖基移酶（ＣＧＴａｓｅ，ＥＣ，３．２，２．１９）固定在壳聚糖上。发现ＣＧＴａｓｅ经固定化后，最适温度没有改变，最适ｐＨ从６．０移到５．０，热稳定性及ｐＨ稳定性都有所提高，在ｐＨ８．５和５０℃下，经过４次分批反应，固定化酶保留约６６％活力，柱式连续反应的半衰期大约为６天。     

克鲁维酵母y—85菊粉酶水解菊粉的研究及其中试

克鲁维酵母（Ｋｌｕｖｅｒｏｍｙｃｅｓｓｐ．）Ｙ－８５在菊粉提取液培养基中生长产菊粉酶，其细胞和胞外和炙粉酶活力分别约占菊粉酶总活力的７６％和２４％，试验中以酶发液酶液，该酶的Ｓ／Ｉ值为１５．２酶液在５０，５５与６０℃下保温１ｈ，活力分别残留１００％，９６％和６５％，在８℃下放置７ｄ１４ｄ酶活力分别残留９８％和９６％，在ｐＨ３．６～７．０内，酶活性十发稳定，５ｍｍｏｌＬ－半胱氨酸和Ｆｅ＾＋２分别可使     

播娘蒿子叶及下胚轴诱导再生植珠的研究

用播娘蒿种子，在附加６－ＢＡ０．５～１．０ｍｇ／Ｌ＋ＮＡＡ０．１ｍｇ／Ｌ的ＭＳ培养基上获得无菌苗，幼苗的下胚轴在含６－ＢＡ０．１ｍｇ／Ｌ＋ＮＡＡ０．５ｍｇ／Ｌ的ＭＳ培养基上出愈情况最佳，将来自下胚轴的愈伤组织培养于含有６－ＢＡ２．０ｍｇ／Ｌ＋ＮＡＡ０．２ｍｇ／Ｌ的ＭＳ培养基上分化出的丛生芽状态最好，最佳生根培养基为１／２ＭＳ＋ＩＢＡ０．５ｍｇ／Ｌ＋ＮＡＡ０．０５ｍｇ／Ｌ．     

克鲁维酵母y－85菊粉酶水解菊粉的研究及其中试

克鲁维酵母（Ｋｌｕｖｅｒｏｍｙｃｅｓｓｐ．）Ｙ－８５在菊粉提取液培养基中生长产菊粉酶，其细胞和胞外的菊粉酶活力分别约占菊粉酶总活力的７６％和２４％．试验中以酶发酵液作酶液．该酶的Ｓ／Ｉ值为１５．２．酶液在５０，５５和６０℃下保温１ｈ，活力分别残留１００％，９６％和６５％；在８℃下放置７ｄ，１４ｄ，酶活力分别残留９８％和９６％．在ｐＨ３．６～７．０内，酶活性十分稳定．５ｍｍｏｌＬ－半胱氨酸和Ｆｅ＋２分别可使酶活力提高１０．４％和４１．２％．ｙ－８５菊粉酶水解菊粉的适宜条件是：底物为总糖浓度１０％～１５％菊粉提取液，ｐＨ５．０，温度为５５℃，酶用量为底物每克糖加酶８００ｕ（以蔗糖为底物测酶活力）或２６．３ｕ（以菊糖为底物测酶活力）、搅拌酶解６ｈ．在上述条件上，底物降解率最高可达９８．５％．酶解液中，果糖占总还原糖量的８５％．用１１００Ｌ罐进行酶解中试，５批试验，底物降解率平均达９４．２％．     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.     

Tracking data management using topology of moving object database system for moving object constrained trajectory in LBS application

Advances in wireless technologies and positioning technologies and spread of wireless devices, an interest in LBS (Location Based Service) is arising. To provide location based service, tracking data should have been stored in moving object database management system (called MODBMS) with proper policies and managed efficiently. So the methods which acquire the location information at regular time intervals then, store and manage have been studied. In this paper, we suggest tracking data management techniques using topology that is corresponding to the moving path of moving object. In our techniques, we update the MODBMS when moving object arrived at a street intersection or a curved road which is represented as the node in topology and predict the location at past and future with attribute of topology and linear function. In this technique, location data that are corresponding to the node in topology are stored, thus reduce the number of update and amount of data. Also in case predicting the location,because topology are used as well as existing location information, accuracy for prediction is increased than applying linear function or spline function.