SPME-GC-MS法测定海水中PEs及与赤潮关系

报道了应用ＳＰＭＥ－ＧＣ－ＭＳ法测定海水中的邻苯二甲酸酯（ＰＥｓ）及其与赤潮的关系,详细研究了萃取头性质、萃取平衡时间、萃取温度、搅拌速度、介质离子强度等条件对萃取效率的影响,该方法简便、快速、灵敏度高,不使用有毒有机溶剂,检测限为０．００５μｇ／Ｌ,ＲＳＤ介于４．３％～７．５％,回收率范围为８８．０％～９５．３％,该方法应用于海水样品的测定发现,赤潮海水中ＰＥｓ的浓度是非赤潮海水的４～１０倍,Ｐ     

Cl~- 和 SO_4~(2-) 对厌氧废水处理的抑制阈值

用人工配制高浓度有机废水分别研究了Ｃｌ－和ＳＯ２－４对厌氧生物废水处理的抑制作用和抑制阈值．在全混流厌氧恒化器和上流式厌氧污泥床（ＵＡＳＢ）反应器中分别得到了对厌氧消化基本无抑制作用（全混流恒化器：Ｃｌ－＜４．５ｇ／Ｌ,ＳＯ２－４＜１．８ｇ／Ｌ;ＵＡＳＢ：Ｃｌ－＜７．２ｇ／Ｌ,ＳＯ２－４＜３．０ｇ／Ｌ）;轻度抑制（全混流恒化器：Ｃｌ－＝４．５～６．０ｇ／Ｌ,ＳＯ２－４＝１．８～３．３ｇ／Ｌ;ＵＡＳＢ：Ｃｌ－＝７．２～８．２ｇ／Ｌ,ＳＯ２－４＝３．０～４．１ｇ／Ｌ）;中度抑制（全混流恒化器：Ｃｌ－＝６．０～１３．８ｇ／Ｌ,ＳＯ２－４＝３．３～６．５ｇ／Ｌ;ＵＡＳＢ：Ｃｌ－＝８．２～１０．０ｇ／Ｌ,ＳＯ２－４＝４．１～６．０ｇ／Ｌ）和重度抑制（全混流恒化器：Ｃｌ－＞１３．８ｇ／Ｌ,ＳＯ２－４＞６．５ｇ／Ｌ;ＵＡＳＢ：Ｃｌ－＞１０．０ｇ／Ｌ,ＳＯ２－４＞６．０ｇ／Ｌ）的不同Ｃｌ－和ＳＯ２－４浓度范围．     

FD-TRT耐热逆转录酶的特性分析

从嗜热细菌ＦＤ３００９中克隆并分离纯化得到的耐热逆转录酶（ＦＤ－ＴＲＴ）,逆转录反应在６５℃高温下进行,可克服常温逆转录酶的许多缺点,以酵母核糖体ｒＲＮＡ为模板,以与２５５和１８Ｓ ｒＲＮＡ匹配的寡聚脱氧核苷酸为引物,探明了ＦＤ－ＴＲＴ的最适反应条件： ２５ｍｍｏｌ／Ｌ Ｔｒｉｓ－ＨＣｌ（ｐＨ ８．５,２５℃）,２５ ｍｍｏｌ／Ｌ（ＮＨ４）２ＳＯ４,２ ｍｍｏｌ／Ｌ ＭｎＣｌ２,１００ μｇ／ｍｌ明胶．５ ｕｎｉｔ ＲＮａｓｉｎ,２５０ ｍｍｏｌ／Ｌ ４种 ｄＮＴＰ, １μＣｉ３ Ｈ－ｄＣＴＰ, １２ｕｇ ＲＮＡ,２５ ｐｍｏｌ引物,并在此条件下测得 ＦＤ－ＴＲＴ和 Ｔａｑ ＤＮＡ 聚合酶逆转录活力与聚合酶活力的相对比值分别为０．０５６,０．００４５．     

复合型纳滤膜的制备及表征

在聚砜基膜上用界面聚合法制备了两种复合型纳滤膜ＰＡ０１和ＰＡ０２。在０．３ＭＰａ下,ＰＡ０１膜对ＭｇＳＯ４溶液和ＦｅＣｌ３溶液的脱直 ９６．０％和７８．０％,水通量分别为８．５（Ｌ．ｍ＾－２．ｈ＾－１）和７．９（Ｌ．ｍ＾－２．ｈ＾－１）;ＰＡ０２膜对ＭｇＳＯ４ｉｐｗｋｉｙｗ （２．０ｇ．Ｌ＾－１）和ＣａＣｌ溶液（０．５ｇ．Ｌ＾－１）的脱盐率分别为９８．０％和８８．８％,水通量分别为１．０（Ｌ。ｍ＾     

萃取荧光法测定电解还原法制备的对氨基苯酚中的微…

以ＰＨ＝９－１１的条件上，用乙酸乙酯萃取电解－还原法生产的对氨基苯酚产品中的４、４＇－二氨基二苯醚，并以２ｍｏｌ／ＬＨＣｌ将ＤＡＰＥ反萃取到水相中，在激发和发射波长分别为２５４和３６０ｎｍ条件下，荧光强度与ＤＡＰＥ的量成正比，线性范围为３０－１８０μｇ／Ｌ，检测限为８．０μｇ／Ｌ，样品加标回收率为７８－９５％。     

Cl-和SO2-4对厌氧废水处理的抑制阈值

用人工配制高浓度有机废水分别研究了Ｃｌ＾－和ＳＯ４＾２－对厌氧生物废水处理的抑制作用和抑制阈值。在全混流厌氧恒化器和上流式厌氧污泥床（ＵＡＳＢ）反应器中分别得到了对厌氧消化基本无抑制作用（全混流恒化器：Ｃｌ＾－〈４．５ｇ／Ｌ,ＳＯ４＾２－〈１．８ｇ／Ｌ;ＵＡＳＢ：Ｃｌ＾－〈７．２ｇ／Ｌ,ＳＯ４＾２－〈３．０ｇ／Ｌ）;轻度抑制（全混流恒化器：Ｃｌ＾－＝４．５￣６．０ｇ／Ｌ,ＳＯ４＾２－＝１．８￣３．     

EMD在Pb—Ag—Ca新型合金阳极上竞争反应的研究

Ｏ２在变质Ｐｂ－Ａｇ－Ｃａ阳极（ＰＡＣ阳极）分别在２０％Ｈ２ＳＯ４及／Ｍｏｌ／Ｌ ＭｎＳＯ４－２０％Ｈ２ＳＯ４体系中过电位ηＯ２测定的结果（２９８Ｋ）及热力学的计算，讨论承ＰＡＣ阳极上的两个主要竞争反应即ＭｎＯ２（ＥＭＤ）电沉积及Ｏ２的析了在不同条件下的变迁。     

用MIBK萃取铂族金属离子的硫氰酸配合物研究

研究了有硫氰酸盐存在下用ＭＩＢＫ（甲基异丁基酮）萃取Ｐｄ（Ⅱ），在０．５－４．０ｍｏｌ／Ｌ ＨＣｌ介质中，有１０００倍ＳＣＮˉ存在下，Ｐｄ（Ⅱ）被定量萃取，有机相：水相可达１：５，萃取容量达１．２ｇ／Ｌ。通过对各级配合物分布的计算，表明此对Ｐｄ（Ⅱ）以Ｐｄ（ＳＣＮ）４＾２－形式存在，初步认为是Ｐｄ（ＳＣＮ）４＾２－与质子化的ＭＩＢＫ形成Ｙａｎｇ（Ｏｘｏｎｌｕｍ ｓａｌｔ）盐而被萃取。     

水中27种有机磷农药GC／MS分析方法研究

本文提出了一种ＧＣ／ＭＳ测定水中２７种有机磷农残物的新方法．水样经液－液（正己烷）萃取后，在萃取液中加入正十二烷作保护剂，经低温浓缩的残留物用ＧＣ／ＭＳ联用仪以ＳＩＭ方式测定．用此法不仅可同时对多种有机磷农残物进行定性与定量，而且对具有色谱峰重叠（即具有相同保留时间）的不同组分也可进行分析和测定．该法对水样中０．０５～１０．００μｇ·Ｌ－１含量水平，其平均回收率在６０．８±０．５％～１３０．３±３．４％之间，检限量为０．０３～０．９５μｇ·Ｌ－１．     

二安替比林基－（3，4－亚甲二氧基）－苯基甲烷光度法测定微量铬（Ⅵ）

合成了二安替比林基－（３，４－亚甲二氧基）苯基甲烷（ＤＡＤＭＰＭ）．研究了ＤＡＤＭＰＭ与Ｃｒ（Ⅵ）的显色反应．在Ｈ３ＰＯ４介质中，在Ｍｎ（Ⅱ）和吐温２０存在下，Ｃｒ（Ⅵ）与ＤＡＤＭＰＭ反应生成橙黄色产物，λｍａｘ为４７０ｕｍ，摩尔吸光系数ε＝３．０×１０５Ｌ·ｍｏｌ－１·ｃｍ－１．铬量在０—５μｇ／２５ｍｌ范围内符合比尔定律．已用于环境水样中Ｃｒ（Ⅵ）的测定，结果满意．     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.     

Tracking data management using topology of moving object database system for moving object constrained trajectory in LBS application

Advances in wireless technologies and positioning technologies and spread of wireless devices, an interest in LBS (Location Based Service) is arising. To provide location based service, tracking data should have been stored in moving object database management system (called MODBMS) with proper policies and managed efficiently. So the methods which acquire the location information at regular time intervals then, store and manage have been studied. In this paper, we suggest tracking data management techniques using topology that is corresponding to the moving path of moving object. In our techniques, we update the MODBMS when moving object arrived at a street intersection or a curved road which is represented as the node in topology and predict the location at past and future with attribute of topology and linear function. In this technique, location data that are corresponding to the node in topology are stored, thus reduce the number of update and amount of data. Also in case predicting the location,because topology are used as well as existing location information, accuracy for prediction is increased than applying linear function or spline function.