树脂镜片的ITO薄膜

介绍ITO材料的一些特性以及ITO膜的制备方法,分析了ITO膜层厚度对减反射膜的减反射效果的影响,从而得出一个合适的厚度.     

低温ITO薄膜制备及光电特性的研究

采用直流磁控溅射ITO陶瓷靶的低温工艺,在柔性基片上镀制ITO薄膜,研究了氧氩体积流量比、溅射气压、溅射速率等工艺条件对ITO薄膜光电性能的影响,并得到了可见光透过率大于80%,电阻率小于3.0×10-4Ω.cm的ITO薄膜.     

SiO2和TiO2缓冲层对柔性ITO薄膜 弯曲特性的影响

讨论了柔性ITO薄膜在弯曲时导电能力失效的机理及影响因素.考察了SiO2和TiO2作为无机缓冲层的加入对于柔性ITO薄膜弯曲特性的影响.实验结果及分析表明,材料间的失配系数,结合力以及薄膜缺陷是影响ITO薄膜弯曲特性的主要因素.SiO2或TiO2无机缓冲层的加入降低了ITO薄膜抗内弯折临界半径;TiO2缓冲层能够明显增加ITO薄膜的耐弯折次数.     

退火对反应离子镀ITO薄膜光学特性的影响

选用R.I.P.工艺,以Sn、In为蒸发物.以Gs-I型全息干板为基片,在200℃的条件下制备出ITO薄膜.经退火处理表明:退火有助于提高ITO薄膜的可见、近红外光的透射率,但退火温度有一阈值;退火不利于提高ITO薄膜的近红外反射率.     

Flexible organic light-emitting diodes with ITO／Ag／ITO multi-layers as anodes

The transparent ITO/Ag/ITO multi-layers are developed as anodes on flexible PET (poly(ethylene terephthalate)) substrates. The influence of these anodes on FOLED (Flexible Organic Light-emitting Diodes) is investigated. From the results of research, it can be seen that the multi-layer anode has optimum characteristics, whose sheetresistance is 11 Ω and optical transmittance is about 80%,when the thickness of Ag sandwiched by two ITO layers is in the range of 14--18 nm. It is demonstrated that the OLED devices with multi-layer anodes give better luminescence and higher efficiency compared with those with single ITO anodes.     

ITO薄膜的制备、光刻及性能测试实验设计

文中就电子科技大学显示器件技术课程ITO薄膜的制备、光刻及性能测试实验进行了深入分析。该实验主要涉及ITO薄膜的制备、图案的刻蚀、ITO薄膜的方阻测试及透过率测试。通过该实验让学生掌握ITO薄膜的制备、薄膜图案的形成及薄膜的性能测试等基本工艺技术。     

ITO退火膜的光学和电学特性

对不同氧流量下用直流磁控溅射法制备的ITO薄膜进行退火处理,并对退火后ITO薄膜的光电特性进行分析．结果表明,N2气氛下退火可以改善ITO薄膜的结晶性,同时使ITO薄膜质量得到优化,并显著提高ITO薄膜的透明性和电导性．     

热处理对ITO薄膜光电性能和抗蚀刻性的影响

利用不同的热处理温度对磁控溅射在玻璃基底的ITO薄膜进行退火处理.借助于原子力显微镜(AFM)、分光辐射计、四探针电阻测试仪等测试手段对不同热处理后的ITO薄膜样品进行表征,研究了不同热处理温度对ITO薄膜表面形貌、面电阻、透光率及抗刻蚀性能的影响.结果表明,随着退火温度的升高,ITO薄膜表面粗糙度增加,面电阻增大,在可见光区的透光率变大,耐刻蚀性增强.     

燃烧合成超细ITO粉体

以In粒和Sn粒为原料,尿素为燃料,柠檬酸为添加剂,燃烧合成ITO(掺锡氧化铟)粉体,利用粉末X射线衍射、扫描电子显微镜对产品进行表征,并研究柠檬酸(C6H8O7)对燃烧产物的影响.结果表明,以尿素为燃料燃烧合成是制备ITO粉体的有效途径,添加剂柠檬酸能有效抑制粉体的团聚,使颗粒分散性变好,得到颗粒细小均匀的ITO粉体...     

基于ITO玻璃-PDMS复合式低电压电泳芯片的快速制备

提出了一种基于ITO玻璃-PDMS复合式低电压电泳芯片的快速制备新方法.该方法采用Protel软件绘制低电压电泳芯片沟道的形状,利用电路板加工技术加工沟道模具,并采用PDMS整体浇注方法制备芯片微沟道;采用光刻、湿法刻蚀等微加工技术方法对ITO导电玻璃进行加工,并制备出ITO阵列电极.最后经修饰、封装等工序得到基于ITO玻璃-PDMS复合式低电压电泳芯片.实验表明:采用该方法制备的ITO阵列电极线条清晰,沟道侧壁陡直、表面光滑.同时,采用该方法制备芯片周期短,不需要昂贵的制作设备.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.