Direct electronic measurement of the spin Hall effect

The generation, manipulation and detection of spin-polarized electrons in nanostructures define the main challenges of spin-based electronics. Among the different approaches for spin generation and manipulation, spin-orbit coupling--which couples the spin of an electron to its momentum--is attracting considerable interest. In a spin-orbit-coupled system, a non-zero spin current is predicted in a direction perpendicular to the applied electric field, giving rise to a spin Hall effect. Consistent with this effect, electrically induced spin polarization was recently detected by optical techniques at the edges of a semiconductor channel and in two-dimensional electron gases in semiconductor heterostructures. Here we report electrical measurements of the spin Hall effect in a diffusive metallic conductor, using a ferromagnetic electrode in combination with a tunnel barrier to inject a spin-polarized current. In our devices, we observe an induced voltage that results exclusively from the conversion of the injected spin current into charge imbalance through the spin Hall effect. Such a voltage is proportional to the component of the injected spins that is perpendicular to the plane defined by the spin current direction and the voltage probes. These experiments reveal opportunities for efficient spin detection without the need for magnetic materials, which could lead to useful spintronics devices that integrate information processing and data storage.     

Electrical spin injection and accumulation at room temperature in an all-metal mesoscopic spin valve

Finding a means to generate, control and use spin-polarized currents represents an important challenge for spin-based electronics, or 'spintronics'. Spin currents and the associated phenomenon of spin accumulation can be realized by driving a current from a ferromagnetic electrode into a non-magnetic metal or semiconductor. This was first demonstrated over 15 years ago in a spin injection experiment on a single crystal aluminium bar at temperatures below 77 K. Recent experiments have demonstrated successful optical detection of spin injection in semiconductors, using either optical injection by circularly polarized light or electrical injection from a magnetic semiconductor. However, it has not been possible to achieve fully electrical spin injection and detection at room temperature. Here we report room-temperature electrical injection and detection of spin currents and observe spin accumulation in an all-metal lateral mesoscopic spin valve, where ferromagnetic electrodes are used to drive a spin-polarized current into crossed copper strips. We anticipate that larger signals should be obtainable by optimizing the choice of materials and device geometry.     

Persistent sourcing of coherent spins for multifunctional semiconductor spintronics.

Recent studies of n-type semiconductors have demonstrated spin-coherent transport over macroscopic distances, with spin-coherence times exceeding 100 ns; such materials are therefore potentially useful building blocks for spin-polarized electronics ('spintronics'). Spin injection into a semiconductor (a necessary step for spin electronics) has proved difficult; the only successful approach involves classical injection of spins from magnetic semiconductors. Other work has shown that optical excitation can provide a short (<500 ps) non-equilibrium burst of coherent spin transfer across a GaAs/ZnSe interface, but less than 10% of the total spin crosses into the ZnSe layer, leaving long-lived spins trapped in the GaAs layer (ref. 9). Here we report a 'persistent' spin-conduction mode in biased semiconductor heterostructures, in which the sourcing of coherent spin transfer lasts at least 1-2 orders of magnitude longer than in unbiased structures. We use time-resolved Kerr spectroscopy to distinguish several parallel channels of interlayer spin-coherent injection. The relative increase in spin-coherent injection is up to 500% in the biased structures, and up to 4,000% when p-n junctions are used to impose a built-in bias. These experiments reveal promising opportunities for multifunctional spin electronic devices (such as spin transistors that combine memory and logic functions), in which the amplitude and phase of the net spin current are controlled by either electrical or magnetic fields.     

Coherent spin manipulation without magnetic fields in strained semiconductors

A consequence of relativity is that in the presence of an electric field, the spin and momentum states of an electron can be coupled; this is known as spin-orbit coupling. Such an interaction opens a pathway to the manipulation of electron spins within non-magnetic semiconductors, in the absence of applied magnetic fields. This interaction has implications for spin-based quantum information processing and spintronics, forming the basis of various device proposals. For example, the concept of spin field-effect transistors is based on spin precession due to the spin-orbit coupling. Most studies, however, focus on non-spin-selective electrical measurements in quantum structures. Here we report the direct measurement of coherent electron spin precession in zero magnetic field as the electrons drift in response to an applied electric field. We use ultrafast optical techniques to spatiotemporally resolve spin dynamics in strained gallium arsenide and indium gallium arsenide epitaxial layers. Unexpectedly, we observe spin splitting in these simple structures arising from strain in the semiconductor films. The observed effect provides a flexible approach for enabling electrical control over electron spins using strain engineering. Moreover, we exploit this strain-induced field to electrically drive spin resonance with Rabi frequencies of up to approximately 30 MHz.     

Spin-torque diode effect in magnetic tunnel junctions

There is currently much interest in the development of 'spintronic' devices, in which harnessing the spins of electrons (rather than just their charges) is anticipated to provide new functionalities that go beyond those possible with conventional electronic devices. One widely studied example of an effect that has its roots in the electron's spin degree of freedom is the torque exerted by a spin-polarized electric current on the spin moment of a nanometre-scale magnet. This torque causes the magnetic moment to rotate at potentially useful frequencies. Here we report a very different phenomenon that is also based on the interplay between spin dynamics and spin-dependent transport, and which arises from unusual diode behaviour. We show that the application of a small radio-frequency alternating current to a nanometre-scale magnetic tunnel junction can generate a measurable direct-current (d.c.) voltage across the device when the frequency is resonant with the spin oscillations that arise from the spin-torque effect: at resonance (which can be tuned by an external magnetic field), the structure exhibits different resistance states depending on the direction of the current. This behaviour is markedly different from that of a conventional semiconductor diode, and could form the basis of a nanometre-scale radio-frequency detector in telecommunication circuits.     

Electrical control of spin coherence in semiconductor nanostructures.

The processing of quantum information based on the electron spin degree of freedom requires fast and coherent manipulation of local spins. One approach is to provide spatially selective tuning of the spin splitting--which depends on the g-factor--by using magnetic fields, but this requires their precise control at reduced length scales. Alternative proposals employ electrical gating and spin engineering in semiconductor heterostructures involving materials with different g-factors. Here we show that spin coherence can be controlled in a specially designed AlxGa1-xAs quantum well in which the Al concentration x is gradually varied across the structure. Application of an electric field leads to a displacement of the electron wavefunction within the quantum well, and because the electron g-factor varies strongly with x, the spin splitting is therefore also changed. Using time-resolved optical techniques, we demonstrate gate-voltage-mediated control of coherent spin precession over a 13-GHz frequency range in a fixed magnetic field of 6 T, including complete suppression of precession, reversal of the sign of g, and operation up to room temperature.     

Room-temperature ferromagnetic nanotubes controlled by electron or hole doping

Nanotubes and nanowires with both elemental (carbon or silicon) and multi-element compositions (such as compound semiconductors or oxides), and exhibiting electronic properties ranging from metallic to semiconducting, are being extensively investigated for use in device structures designed to control electron charge. However, another important degree of freedom--electron spin, the control of which underlies the operation of 'spintronic' devices--has been much less explored. This is probably due to the relative paucity of nanometre-scale ferromagnetic building blocks (in which electron spins are naturally aligned) from which spin-polarized electrons can be injected. Here we describe nanotubes of vanadium oxide (VO(x)), formed by controllable self-assembly, that are ferromagnetic at room temperature. The as-formed nanotubes are transformed from spin-frustrated semiconductors to ferromagnets by doping with either electrons or holes, potentially offering a route to spin control in nanotube-based heterostructures.     

Chiral magnetic order at surfaces driven by inversion asymmetry

Chirality is a fascinating phenomenon that can manifest itself in subtle ways, for example in biochemistry (in the observed single-handedness of biomolecules) and in particle physics (in the charge-parity violation of electroweak interactions). In condensed matter, magnetic materials can also display single-handed, or homochiral, spin structures. This may be caused by the Dzyaloshinskii-Moriya interaction, which arises from spin-orbit scattering of electrons in an inversion-asymmetric crystal field. This effect is typically irrelevant in bulk metals as their crystals are inversion symmetric. However, low-dimensional systems lack structural inversion symmetry, so that homochiral spin structures may occur. Here we report the observation of magnetic order of a specific chirality in a single atomic layer of manganese on a tungsten (110) substrate. Spin-polarized scanning tunnelling microscopy reveals that adjacent spins are not perfectly antiferromagnetic but slightly canted, resulting in a spin spiral structure with a period of about 12 nm. We show by quantitative theory that this chiral order is caused by the Dzyaloshinskii-Moriya interaction and leads to a left-rotating spin cycloid. Our findings confirm the significance of this interaction for magnets in reduced dimensions. Chirality in nanoscale magnets may play a crucial role in spintronic devices, where the spin rather than the charge of an electron is used for data transmission and manipulation. For instance, a spin-polarized current flowing through chiral magnetic structures will exert a spin-torque on the magnetic structure, causing a variety of excitations or manipulations of the magnetization and giving rise to microwave emission, magnetization switching, or magnetic motors.     

Magnetic enhancement of superconductivity from electron spin domains

Since the discovery of superconductivity, there has been a drive to understand the mechanisms by which it occurs. The BCS (Bardeen-Cooper-Schrieffer) model successfully treats the electrons in conventional superconductors as pairs coupled by phonons (vibrational modes of oscillation) moving through the material, but there is as yet no accepted model for high-transition-temperature, organic or 'heavy fermion' superconductivity. Experiments that reveal unusual properties of those superconductors could therefore point the way to a deeper understanding of the underlying physics. In particular, the response of a material to a magnetic field can be revealing, because this usually reduces or quenches superconductivity. Here we report measurements of the heat capacity and magnetization that show that, for particular orientations of an external magnetic field, superconductivity in the heavy-fermion material CeCoIn(5) is enhanced through the magnetic moments (spins) of individual electrons. This enhancement occurs by fundamentally altering how the superconducting state forms, resulting in regions of superconductivity alternating with walls of spin-polarized unpaired electrons; this configuration lowers the free energy and allows superconductivity to remain stable. The large magnetic susceptibility of this material leads to an unusually strong coupling of the field to the electron spins, which dominates over the coupling to the electron orbits.     

Observation of the spin Seebeck effect

The generation of electric voltage by placing a conductor in a temperature gradient is called the Seebeck effect. Its efficiency is represented by the Seebeck coefficient, S, which is defined as the ratio of the generated electric voltage to the temperature difference, and is determined by the scattering rate and the density of the conduction electrons. The effect can be exploited, for example, in thermal electric-power generators and for temperature sensing, by connecting two conductors with different Seebeck coefficients, a device called a thermocouple. Here we report the observation of the thermal generation of driving power, or voltage, for electron spin: the spin Seebeck effect. Using a recently developed spin-detection technique that involves the spin Hall effect, we measure the spin voltage generated from a temperature gradient in a metallic magnet. This thermally induced spin voltage persists even at distances far from the sample ends, and spins can be extracted from every position on the magnet simply by attaching a metal. The spin Seebeck effect observed here is directly applicable to the production of spin-voltage generators, which are crucial for driving spintronic devices. The spin Seebeck effect allows us to pass a pure spin current, a flow of electron spins without electric currents, over a long distance. These innovative capabilities will invigorate spintronics research.     

Giant spin Seebeck effect in a non-magnetic material

The spin Seebeck effect is observed when a thermal gradient applied to a spin-polarized material leads to a spatially varying transverse spin current in an adjacent non-spin-polarized material, where it gets converted into a measurable voltage. It has been previously observed with a magnitude of microvolts per kelvin in magnetically ordered materials, ferromagnetic metals, semiconductors and insulators. Here we describe a signal in a non-magnetic semiconductor (InSb) that has the hallmarks of being produced by the spin Seebeck effect, but is three orders of magnitude larger (millivolts per kelvin). We refer to the phenomenon that produces it as the giant spin Seebeck effect. Quantizing magnetic fields spin-polarize conduction electrons in semiconductors by means of Zeeman splitting, which spin-orbit coupling amplifies by a factor of ～25 in InSb. We propose that the giant spin Seebeck effect is mediated by phonon-electron drag, which changes the electrons' momentum and directly modifies the spin-splitting energy through spin-orbit interactions. Owing to the simultaneously strong phonon-electron drag and spin-orbit coupling in InSb, the magnitude of the giant spin Seebeck voltage is comparable to the largest known classical thermopower values.     

Half-metallic graphene nanoribbons

Electrical current can be completely spin polarized in a class of materials known as half-metals, as a result of the coexistence of metallic nature for electrons with one spin orientation and insulating nature for electrons with the other. Such asymmetric electronic states for the different spins have been predicted for some ferromagnetic metals--for example, the Heusler compounds--and were first observed in a manganese perovskite. In view of the potential for use of this property in realizing spin-based electronics, substantial efforts have been made to search for half-metallic materials. However, organic materials have hardly been investigated in this context even though carbon-based nanostructures hold significant promise for future electronic devices. Here we predict half-metallicity in nanometre-scale graphene ribbons by using first-principles calculations. We show that this phenomenon is realizable if in-plane homogeneous electric fields are applied across the zigzag-shaped edges of the graphene nanoribbons, and that their magnetic properties can be controlled by the external electric fields. The results are not only of scientific interest in the interplay between electric fields and electronic spin degree of freedom in solids but may also open a new path to explore spintronics at the nanometre scale, based on graphene.     

Microwave oscillations of a nanomagnet driven by a spin-polarized current

The recent discovery that a spin-polarized electrical current can apply a large torque to a ferromagnet, through direct transfer of spin angular momentum, offers the possibility of manipulating magnetic-device elements without applying cumbersome magnetic fields. However, a central question remains unresolved: what type of magnetic motions can be generated by this torque? Theory predicts that spin transfer may be able to drive a nanomagnet into types of oscillatory magnetic modes not attainable with magnetic fields alone, but existing measurement techniques have provided only indirect evidence for dynamical states. The nature of the possible motions has not been determined. Here we demonstrate a technique that allows direct electrical measurements of microwave-frequency dynamics in individual nanomagnets, propelled by a d.c. spin-polarized current. We show that spin transfer can produce several different types of magnetic excitation. Although there is no mechanical motion, a simple magnetic-multilayer structure acts like a nanoscale motor; it converts energy from a d.c. electrical current into high-frequency magnetic rotations that might be applied in new devices including microwave sources and resonators.     

Spin-orbit qubit in a semiconductor nanowire

Motion of electrons can influence their spins through a fundamental effect called spin-orbit interaction. This interaction provides a way to control spins electrically and thus lies at the foundation of spintronics. Even at the level of single electrons, the spin-orbit interaction has proven promising for coherent spin rotations. Here we implement a spin-orbit quantum bit (qubit) in an indium arsenide nanowire, where the spin-orbit interaction is so strong that spin and motion can no longer be separated. In this regime, we realize fast qubit rotations and universal single-qubit control using only electric fields; the qubits are hosted in single-electron quantum dots that are individually addressable. We enhance coherence by dynamically decoupling the qubits from the environment. Nanowires offer various advantages for quantum computing: they can serve as one-dimensional templates for scalable qubit registers, and it is possible to vary the material even during wire growth. Such flexibility can be used to design wires with suppressed decoherence and to push semiconductor qubit fidelities towards error correction levels. Furthermore, electrical dots can be integrated with optical dots in p-n junction nanowires. The coherence times achieved here are sufficient for the conversion of an electronic qubit into a photon, which can serve as a flying qubit for long-distance quantum communication.     

Single-shot read-out of an individual electron spin in a quantum dot

Spin is a fundamental property of all elementary particles. Classically it can be viewed as a tiny magnetic moment, but a measurement of an electron spin along the direction of an external magnetic field can have only two outcomes: parallel or anti-parallel to the field. This discreteness reflects the quantum mechanical nature of spin. Ensembles of many spins have found diverse applications ranging from magnetic resonance imaging to magneto-electronic devices, while individual spins are considered as carriers for quantum information. Read-out of single spin states has been achieved using optical techniques, and is within reach of magnetic resonance force microscopy. However, electrical read-out of single spins has so far remained elusive. Here we demonstrate electrical single-shot measurement of the state of an individual electron spin in a semiconductor quantum dot. We use spin-to-charge conversion of a single electron confined in the dot, and detect the single-electron charge using a quantum point contact; the spin measurement visibility is approximately 65%. Furthermore, we observe very long single-spin energy relaxation times (up to approximately 0.85 ms at a magnetic field of 8 T), which are encouraging for the use of electron spins as carriers of quantum information.     

Giant magnetoresistance in organic spin-valves

A spin valve is a layered structure of magnetic and non-magnetic (spacer) materials whose electrical resistance depends on the spin state of electrons passing through the device and so can be controlled by an external magnetic field. The discoveries of giant magnetoresistance and tunnelling magnetoresistance in metallic spin valves have revolutionized applications such as magnetic recording and memory, and launched the new field of spin electronics--'spintronics'. Intense research efforts are now devoted to extending these spin-dependent effects to semiconductor materials. But while there have been noteworthy advances in spin injection and detection using inorganic semiconductors, spin-valve devices with semiconducting spacers have not yet been demonstrated. pi-conjugated organic semiconductors may offer a promising alternative approach to semiconductor spintronics, by virtue of their relatively strong electron-phonon coupling and large spin coherence. Here we report the injection, transport and detection of spin-polarized carriers using an organic semiconductor as the spacer layer in a spin-valve structure, yielding low-temperature giant magnetoresistance effects as large as 40 per cent.     

Current-induced domain-wall switching in a ferromagnetic semiconductor structure

Magnetic information storage relies on external magnetic fields to encode logical bits through magnetization reversal. But because the magnetic fields needed to operate ultradense storage devices are too high to generate, magnetization reversal by electrical currents is attracting much interest as a promising alternative encoding method. Indeed, spin-polarized currents can reverse the magnetization direction of nanometre-sized metallic structures through torque; however, the high current densities of 10(7)-10(8) A cm(-2) that are at present required exceed the threshold values tolerated by the metal interconnects of integrated circuits. Encoding magnetic information in metallic systems has also been achieved by manipulating the domain walls at the boundary between regions with different magnetization directions, but the approach again requires high current densities of about 10(7) A cm(-2). Here we demonstrate that, in a ferromagnetic semiconductor structure, magnetization reversal through domain-wall switching can be induced in the absence of a magnetic field using current pulses with densities below 10(5) A cm(-2). The slow switching speed and low ferromagnetic transition temperature of our current system are impractical. But provided these problems can be addressed, magnetic reversal through electric pulses with reduced current densities could provide a route to magnetic information storage applications.     

Electrical detection of spin precession in a metallic mesoscopic spin valve

To study and control the behaviour of the spins of electrons that are moving through a metal or semiconductor is an outstanding challenge in the field of 'spintronics', where possibilities for new electronic applications based on the spin degree of freedom are currently being explored. Recently, electrical control of spin coherence and coherent spin precession during transport was studied by optical techniques in semiconductors. Here we report controlled spin precession of electrically injected and detected electrons in a diffusive metallic conductor, using tunnel barriers in combination with metallic ferromagnetic electrodes as spin injector and detector. The output voltage of our device is sensitive to the spin degree of freedom only, and its sign can be switched from positive to negative, depending on the relative magnetization of the ferromagnetic electrodes. We show that the spin direction can be controlled by inducing a coherent spin precession caused by an applied perpendicular magnetic field. By inducing an average precession angle of 180 degrees, we are able to reverse the sign of the output voltage.     

Magnetization vector manipulation by electric fields

Conventional semiconductor devices use electric fields to control conductivity, a scalar quantity, for information processing. In magnetic materials, the direction of magnetization, a vector quantity, is of fundamental importance. In magnetic data storage, magnetization is manipulated with a current-generated magnetic field (Oersted-Ampère field), and spin current is being studied for use in non-volatile magnetic memories. To make control of magnetization fully compatible with semiconductor devices, it is highly desirable to control magnetization using electric fields. Conventionally, this is achieved by means of magnetostriction produced by mechanically generated strain through the use of piezoelectricity. Multiferroics have been widely studied in an alternative approach where ferroelectricity is combined with ferromagnetism. Magnetic-field control of electric polarization has been reported in these multiferroics using the magnetoelectric effect, but the inverse effect-direct electrical control of magnetization-has not so far been observed. Here we show that the manipulation of magnetization can be achieved solely by electric fields in a ferromagnetic semiconductor, (Ga,Mn)As. The magnetic anisotropy, which determines the magnetization direction, depends on the charge carrier (hole) concentration in (Ga,Mn)As. By applying an electric field using a metal-insulator-semiconductor structure, the hole concentration and, thereby, the magnetic anisotropy can be controlled, allowing manipulation of the magnetization direction.     

多铁性异质结研究进展

多铁异质结中的磁电耦合效应是凝聚态物理和材料物理的研究热点之一.相比单相的多铁材料,多铁异质结中界面处的自旋、电荷、轨道以及晶格之间存在着复杂的相互作用,导致出现一些新的物理现象,使得其在新一代的存储器、传感器、微波等领域中具有重要的应用前景.文章介绍近年来在多铁异质结方向取得的进展,着重介绍实现电场对磁性控制的场效应、应变效应、交换偏置效应等,以及磁场对多铁性的调控,从而获得很大的磁电耦合效应;分析了多铁隧道结及其磁电耦合效应,其集成了传统铁电隧道结和铁磁隧道结的优势,可大幅度提高单个存储单元存储状态,从而提高存储密度.最后提出当前面临的问题和对未来的展望.