葛根甙元的电化学行为及其应用研究

葛根甙元在０．１ｍｏｌ·Ｌ－１Ｈ２ＳＯ４底液中，出现一灵敏的示波极谱导数峰。峰电位为－１．１０Ｖ（ｖｓ．ＳＣＥ），峰电流与葛根甙元浓度在５．０×１０－７～６．０×１０－６ｍｏｌ·Ｌ－１范围内成线性关系，检出限为３．０×１０－７ｍｏｌ·Ｌ－１．用于片剂的测定，回收率９７．５％～１０５．０％，用吸附伏安法，当富集时间为６０ｓ时，峰电流与葛根甙元浓度在２０×１０－９～１．０×１０－８，１．０×１０－８～１．０×１０－７ｍｏｌ·Ｌ－１范围内呈线性关系，检出限可达５．０×１０－１０ｍｏｌ·Ｌ－１．用多种电化学手段研究体系的电化学行为，测得电极反应电子数ｎ＝１．电子转移因数α＝０．４５。体系具有吸附性，并符合Ｆｒｕｍｋｉｎ吸附等温式，吸附因数β＝１．３３×１０５，吸引因数α＝０．９５．实验表明，葛根甙元的还原为不可逆两步单电子电极反应过程。     

磺胺嘧啶的极谱伏安行为研究

通过对磺胺嘧啶在多种底液中的极谱伏安行为研究，发现磺胺嘧定在ＢＲ缓冲溶液（ｐＨ４．２）和ＨＡｃ－ＮａＡｃ缓冲液（ｐＨ４．３２）中产生良好的还原峰，峰电位分别为－０．７６Ｖ和－０．７９Ｖ（ｖｓ．ＳＣＥ），在这两种底液中，峰电流或其导数峰高与磺胺嘧啶浓度在５×１０＾－７～４×１０＾－４ｍｏｌ／Ｌ和５×１０＾－６～３×１０＾－４ｍｏｌ／Ｌ范围内呈良好的线性关系，检测限为８×１０＾－７ｍｏｌ／Ｌ，可望用于     

和厚朴酚的吸附伏安法研究

和厚朴酚在０．１ｍｏｌ·Ｌ＾－ＮＨ３－ＮＨ４Ｃｌ底液中,出现一灵敏吸附伏安还原峰,Ｅｐ＝－０．２３Ｖ（ｖｓ．Ａｇ／ＡｇＣｌ）。当富集时间为３ｍｉｎ时,峰电流与和厚朴酚浓度在１．０×１０＾－８￣１．０×１０＾－７ｍｏｌ·Ｌ＾－１范围内呈线性关系,检测限为３．０×１０＾－９ｍｏｌ·Ｌ＾－１,可用于中药厚朴的测定。     

吸附溶出伏安法测定水中痕量钴

介绍测定痕量钴的一种方法。在０．０１ｍｏｌ／Ｌ ＮＨ３·Ｈ２Ｏ－ＮＨ４Ｃｌ和１．０×１０＾－６ｍｏｌ／Ｌ酸性铬兰Ｋ（ＡＣＢＫ）溶液中，Ｃｏ（Ⅱ）产生很灵敏的还原波，其峰电位是－０．５２Ｖ（ｖｓ、ＳＣＥ）．Ｃｏ（Ⅱ）的浓度在２．０×１０＾－８￣５．０×１０＾－７ｍｏｌ／Ｌ的范围内与峰电流成直线关系，检测限是５．０×１０＾－９ｍｏｌ／Ｌ。这一方法用于测定水中痕量钴，结果令人满意。     

安眠酮的吸附极谱波研究

在ｐＨ４．５缓冲溶液中，安眠酮在－１．１７Ｖ处产生一灵敏吸附极谱波，利用此波可测定微量安眠酮，线性范围为１．０×１０＾－７￣１．０×１０＾－６ｍｏｌ·Ｌ＾－１，检测下限为９．０×１０＾－８ｍｏｌ·Ｌ＾－１，所提出的方法用于片剂及血清中安眠酮的测定，结果满意。     

次黄嘌呤在铜电极上的伏安特性研究

研究了次黄嘌呤在铜电极上的电化学行为。实验发现,以１．９６×１０＾－３￣４×１０＾－４ｍｏｌ·Ｌ＾－１ＮａＯＨ作支持电解质时,在－０．２５￣－０．４０Ｖ的电位范围内有一灵敏的阴极峰,它是吸附于铜电极表面的Ｈｘａ与Ｃｕ＾＋络合物的溶出伏安峰,在选择的实验条件下,峰高与Ｈｘａ的浓度在１．４６×１０＾－６￣２×１０＾－３ｍｏｌ·Ｌ＾－１范围内呈良好的线性关系,最低检测限为５．６×１０＾－８ｍｏｌ·Ｌ＾－     

马钱子碱在碳糊电极上的吸附伏安测定法研究

以石墨电极为基体制成碳糊电极,研究了马钱子碱在该电极上的测定方法,在０．０１ｍｏｌ·Ｌ＾－１Ｈ２ＳＯ４底液中,选择阳极电位为０．３５Ｖ,峰电流与马钱子碱的浓度在１．０×１０＾－７－１．０×１０＾－４ｍｏｌ·Ｌ＾－１范围内呈良好的线性关系,该法的检测下限为５．０×１０＾－８ｍｏｌ·Ｌ＾－１,回收范围为９５．８－１０５．９％中变量的取值和相对标准偏 ３．３％。本方法准确、快速、简便。     

导数示波极谱法测定大气中微量的二硫化碳

研究了导数示波极谱法测定大气中微量的二硫化碳。在０．６９００ｍｏｌ．Ｌ＾－１乙醇０．０９７０ｍｏｌ．Ｌ＾－１二乙胺－０．００１ ５ｍｏｌ．Ｌ＾－１ＥＤＴＡ底液中,二硫化碳产生一灵敏的峰电流。峰电位为－０．６４Ｖ（ｖｓ．ＳＣＥ）．二硫化碳浓度在１．００×１０＾－８ｍｏｌ．Ｌ＾－１－３．００×１０＾－５ｍｏｌ．Ｌ＾－１范围内,浓度与峰电流具有线性关系。检测限为１．００×１０＾－８ｍｏｌ．Ｌ＾－１．用本     

1，10－菲罗啉－5，6－二醌伏安行为研究

在０．５０ｍｏｌ·Ｌ~（－１）ＮＨ_３－ＮＨ_４Ｃｌ缓冲溶液中，１，１０－菲罗啉－５，６－二醌有一还原伏安峰。当静止富集２ｍｉｎ，ｖ＝１００ｍＶ·ｓ~（－１）时，其峰电位Ｅ_ｐ＝－１．３１Ｖ（ｖｓ．Ａｇ／ＡｇＣｌ）。用线性扫描和循环伏安法等手段研究体系的伏安行为，特别是吸附性。实验表明，该体系属具有吸附性的不可逆过程。用于单扫示波极谱法测定，线性范围为５．０×１０~（－８）～５．０×１０~（－６）ｍｏｌ·Ｌ~（－１），其相关系数为０．９９９５。     

秦皮乙素的单扫示波极谱法研究

在０．１ｍｏｌ·Ｌ－１ＮＨ４Ａｃ（ｐＨ６．１）溶液中，秦皮乙素在单扫示波极谱上有一灵敏的导数极谱波，峰电位Ｅｐ＝－１．３２Ｖ（ｖｓ．ＳＣＥ）．峰电流ｉｐ与秦皮乙素浓度在４０×１０－６～８．０×１０－５ｍｏｌ·Ｌ－１范围内成线性关系。并用于中药秦皮的测定，得到满意的结果，用线性扫描和循环伏安法探讨体系的伏安行为。，结果表明，该体系属具有吸附性的不可逆过程。     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.