2—甲基—5—氯苯并米唑的合成研究

合成了２－甲基－５－氯苯并米唑１．乙酰栖胺经氯代制得４－氯乙酰苯胺５，产率６７．３％；５硝化得到－硝基－５－氯乙酰苯胺６，产率７０．８％；６经还原环化得到１，产率７８．４％。研究了各步合成的条件及其对产率的影响，并对实验结果进行了讨论。     

（R）－2－硫代四氢噻唑－4－羧酸甲酯的合成及消旋化

Ｌ－半胱氨酸甲酯盐酸盐和二硫化碳在三乙胺存在下反应，当摩尔比为１：１．５：２时，得到的（Ｒ）－２－硫代四氢噻唑－４－羧酸甲酯，产率８０％；摩尔比为１：１．５１３．５时，得到Ｒ，Ｓ－２－硫代四氢噻唑－４－羧酸甲酯。另外，由（Ｒ）－２－硫代四氢噻唑－４－羧酸与甲醇及二氯亚硫酰反应，也得到（Ｒ）－２－硫代四氢噻唑－４－羧酸甲酯，产率为９８％，     

（1R，3R）－（－）－1－甲氧基－5，6－亚甲二氧基－3－（3，4，5－三甲氧苯基）－异苯并二氢呋喃的选择性合成

在ＬｉＡｌＨ４及光学活性物质（５Ｒ）－孟氧基－２（５Ｈ）－呋喃酮（５）存在下，将６－（３′，４′，５′－三甲氧基羟卞基）－胡椒醛二甲缩醛（４）的甲苯溶液加热回流８小时，可得旋光性的（１Ｒ，３Ｒ）－（－）－１－甲氧基－５，６－亚甲二氧基－３－（３，４，５－三甲氧苯基）－异苯并二氢呋喃晶体（１），产率６１．８％．     

4－苯基－2－丁酮与芳香醛和芳香胺的Mannich反应

在催化量浓盐酸作用下，４－苯基－２－丁酮与芳香醛和芳香胺直接发生Ｍａｎｎｉｃｈ反应，生成５－苯基－１－芳基－１－芳胺基－３－戊酮．产率７５％～９２％．共得到１５个新化合物．它们的结构都经元素分析、ＩＲ和ＭＳ证实．     

1，4－二钠－1，1，4，4－四苯基丁烷加合物的合成与表征

用１，４－二钠－１，１，４，４－四苯基丁烷在乙醚中分别与四氢呋喃（ＴＨＦ）和１，２－二乙氧基乙烷（ＤＥＥ）反应，合成了两个未见报道的、对空气和湿气极为敏感的１，４－二钠－１，１，４，４－四苯基丁烷加合物（Ｃ６Ｈ５）２ＣＮａＣＨ２ＣＨ２ＣＮａ（Ｃ６Ｈ５）２·ｎＬ（Ｌ＝ＴＨＦ．ｎ＝８；Ｌ＝ＤＥＥ，ｎ＝６）加合物均经元素分析、红外光谱、质谱及氢核磁共振谱鉴定．     

4，4＇－二羟基二苯砜的改进合成

改进了苯酚与硫酸反应合成４，４＇－二烃基二苯砜的工艺。按硫酸与苯酚用量摩尔比为０．６：１加料，在１６０℃左右反应，并用共沸溶剂苯不断地除去反应过程中生成的水，合成了４，４＇－二径基二苯砚，产率由原来的５５．５％提高到８９．５％。     

La－Sm－Sn－O烧绿石型甲烷氧化偶联催化剂的研制

为了研制用于从天然气制取乙烯的，具有良好的催化活性、选择性和稳定性的催化剂，用溶胶－凝胶法合成了系列稀上－锡复合氧化物Ｌａ２－ｘＳｍｘＳｎ２Ｏ７（ｘ＝０．０，０．５，１．０，１．５，２．０）．用ｘＲＤ对其结构研究表明：Ｌａ２－ｘＳｉｎｘＳｎ２Ｏ７，系列稀土－锡复合氧化物均具有烧绿石型结构，属立方晶系，空间群为Ｆ３ｄｍ．同时发现其晶胞参数ａｐｙｒ随Ｓｍ掺入量增加而近乎线性减小．并在脉冲激反应器上，对其催化活性进行评价．结果表明：Ｓｍ２Ｓｎ２Ｏ７复合氧化物对甲烷氧化偶联反应具有良好的催化活性，在ＣＨ４／Ｏ２＝４，温度在８００℃～９００℃，Ｘ＝２．０时，Ｃ２选择性为３８．１％，产率为９．２％，其中Ｃ２＝的选择性为２７．９％，产率为６．４％．同时发现晶格缺陷的形成有利于催化剂催化活性的提高．     

N－（4－乙酰基戊酰）－四氢噻唑－2－硫酮的合成及其酰胺化反应

在碘化Ｎ－甲基－２－氯吡啶盐存在下，将４－乙酰基戊酸与四氢噻唑－２－硫酮反应，可获得Ｎ－（４－乙酰基戊酰）．四氢噻唑－２－硫酮，产率５３．８％。将产物Ｉ分别与环己胺、二乙胺、α－苯乙胺进行胺解，得到相应的４－乙酰基酰胺衍生物Ⅱ＿（ａ－ｃ），产率８５％～９４％。     

金属卟啉在医学和催化中的应用：Ⅰ.卟啉配体的合成…

用改良的Ａｄｌｅｒ－ｌｏｎｇｏ方法合成了若干卟啉配体，得到较高的收率。所合成的卟啉及所得产率分别为（１）ＴＰＰ２７．３％；（２）ｔ（３，４，５－３ＭｅＯ－Ｐ）Ｐ３０．４％；（３）Ｔ（４－Ｍｅ－Ｐ）Ｐ２３．９％；（４）Ｔ（３，５－２Ｍｅ）Ｐ２２％；（５）Ｔ（４－Ｃｌ－ｐ）Ｐ２９．８％，合成反应在低于丙酸的回流温度下进行。     

（1R,3R）—（—）—1—甲氧基—5,6—亚甲二氧基—3—（3,4,5—三甲氧苯基）…

在ＬｉＡｌＨ４及光学活性物质－孟氧基－３（５Ｈ）－呋酮存在下，将６－（３’，４，５－三甲氧基羟卞基）－胡椒醛二甲缩醛的甲苯溶液加热回汉８小时，可得旋光性的（１Ｒ，３４）－（－１）－１－甲氧基－５，６－亚甲二氧基－３－（３，４，５三甲氧苯基）－异苯并二氢呋喃晶体，产率６１．８％。     

Markedness and its Interpretation in Language Use

Language markedness is a common phenomenon in languages, and is reflected from hearing, vision and sense, i.e. the variation in the three aspects such as phonology, morphology and semantics. This paper focuses on the interpretation of markedness in language use following the three perspectives, i.e. pragmatic interpretation, psychological interpretation and cognitive interpretation, with an aim to define the function of markedness.     

Lower Paleozoic oil relationships within Williston Basin, Canada

The Williston Basin is a significant petroleum province, containing oil production zones that include the Middle Cambrian to Lower Ordovician, Upper Ordovician, Middle Devonian, Upper Devonian and Mississippian and within the Jurassic and Cretaceous. The oils of the Williston Basin exhibit a wide range of geochemical characteristics defined as "oil families", although the geochemical signature of the Cambrian Deadwood Formation and Lower Ordovician Winnipeg reservoired oils does not match any "oil family". Despite their close stratigraphic proximity, it is evident that the oils of the Lower Palaeozoic within the Williston Basin are distinct. This suggests the presence of a new "oil family" within the Williston Basin. Diagnostic geochemical signatures occur in the gasoline range chromatograms, within saturate fraction gas chromatograms and biomarker fingerprints. However, some of the established criteria and cross-plots that are currently used to segregate oils into distinct genetic families within the basin do not always meet with success, particularly when applied to the Lower Palaeozoic oils of the Deadwood and Winnipeg Formation.     

An Analysis of Catherine＇s Character——Wuthering Heights

Wuthering Heights, Emily Bronte＇s only novel, was published in December of 1847 under the pseudonym Ellis Bell. The book did not gain immediate success, but it is now thought one of the finest novels in the English language. Catherine is the key character of this masterpiece, because everybody and everything center on her though she had a short life. We can understand this masterpiece better if we know Catherine well.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

Features of Women's language

Language is a means of verbal communication. People use language to communicate with each other. In the society, no two speakers are exactly alike in the way of speaking. Some differences are due to age, gender, statue and personality. Above all, gender is one of the obvious reasons. The writer of this paper tries to describe the features of women＇s language from these perspectives： pronunciation, intonation, diction, subjects, grammar and discourse. From the discussion of the features of women＇s language, more attention should be paid to language use in social context. What＇s more, the linguistic phenomena in a speaking community can be understood more thoroughly.     

Design and analysis of generic LBS application developing platform

Location based services is promising due to its novel working style and contents.A software platform is proposed to provide application programs of typical location based services and support new applications developing efficiently. The analysis shows that this scheme is easy implemented, low cost and adapt to all kinds of mobile nework system.     

橡胶颗粒沥青混合料低温抗裂性试验研究

以AC-13级配为基础,将橡胶颗粒代替部分集料掺入混合料中,以低温弯曲试验为评价方法对不同橡胶颗粒掺量下沥青混合料的低温抗裂性进行研究,并引入应变能密度值对混合料的低温抗裂性进行综合评价.试验结果表明:橡胶颗粒沥青混合料试件的破坏微应变均超过2 300,满足冬寒区的技术指标;无论是否掺加橡胶颗粒,随着温度的下降,沥青混合料破坏时的最大弯拉强度增大,弯拉应变降低,劲度模量增大;弯曲应变能密度在胶粒掺量为1%左右时具有较大的弯曲应变能密度值,此时橡胶颗粒沥青混合料具有较好的低温抗裂性.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

低渗透非均质砂岩油藏启动压力梯度研究

理论推导与室内实验相结合,建立了低渗透非均质砂岩油藏启动压力梯度确定方法。首先借助油藏流场与电场相似的原理,推导了非均质砂岩油藏启动压力梯度计算公式。其次基于稳定流实验方法,建立了非均质砂岩油藏启动压力梯度测试方法。结果表明:低渗透非均质砂岩油藏的启动压力梯度确定遵循两个等效原则。平面非均质油藏的启动压力梯度等于各级渗透率段的启动压力梯度关于长度的加权平均;纵向非均质油藏的启动压力梯度等于各渗透率层的启动压力梯度关于渗透率与渗流面积乘积的加权平均。研究成果可用于有效指导低渗透非均质砂岩油藏的合理井距确定,促进该类油藏的高效开发。     

Quantitative trait loci （QTLs） for quality traits related to protein and starch in wheat

Quality traits in wheat （Triticum aestirum L.） were studied by quantitative trait locus （QTL） analysis in a recombinant inbred line （RIL） population, a set of 131 lines derived from Chuan 35050 × Shannong 483 cross （ChSh）. Grains from RILs were assayed for 21 quality traits related to protein and starch. A total of 35 putative QTLs for 19 traits with a single QTL explaining 7.99-40.52% of phenotypic variations were detected on 10 chromosomes, 1D, 2A, 2D, 3B, 3D, 5A, 6A, 6B, 6D, and 7B. The additive effects of 30 QTLs were positive, contributed by Chuan 35050, the remaining 5 QTLs were negative with the additive effect contributed by Shannong 483. For protein traits, 15 QTLs were obtained and most of them were located on chromosomes 1 D, 3B and 6D, while 20 QTLs for starch traits were detected and most of them were located on chromosomes 3D, 6B and 7B. Only 7 QTLs for protein and starch traits were co-located in three regions on chromosomes 1D, 2A and 2D. These protein and starch trait QTLs showed a distinct distribution pattern in certain regions and chromosomes. Twenty-two QTLs were clustered in 6 regions of 5 chromosomes. Two QTL clusters for protein traits were located on chromosomes 1D and 3B, respectively, three clusters for starch traits on chromosomes 3D, 6B and 7B, and one cluster including protein and starch traits on chromosome 1D.