Effect of Al on microstructure and mechanical properties of as-extruded Mg–1Mn alloy sheet

The effect of Al addition on microstructure and mechanical properties of hot extruded Mg–1 Mn alloy sheet was investigated. The results revealed that the dynamic recrystallization was promoted by increasing Al content. The ultimate tensile strength and yield strength of the alloy increased with the increase of Al content. The Mg–9 Al–1 Mn alloy exhibited the highest strength, with tensile strength of 308 MPa, 307 MPa, 319 MPa, yield strength of 199 MPa, 207 MPa, 220 MPa and the elongation of 20.9%, 20.1%, 19.2% in 0°, 45°, 90°, respectively.The high strength was mainly attributed to the formation of fine dynamically recrystallized grains and large amounts of the second phase. The strengthening mechanism of the alloys was explained.     

Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

西文期刊回溯建库中几个重要项目的著录

在实践的基础上，从期刊的出版日期、出版周期、卷、期、年、月及其他标识、ISSN、增刊、出版者以及期刊的历史发展等方面对西文期刊机读目录的标准化著录问题进行了探讨。     

APCI5000电气自动化成套装置设计

电气自动化成套装置种类繁多，并广泛应用于电力系统．结合现场实际商业运行期所积累的经验，并根据市场预测以及目前工控机发展动态，提出了采用APCI5000工业控制计算机实现电气自动化成套装置设计的最佳方案．     

钛酸铋的热力学理论

利用点群４／ｍｍｍ的对称性给出了应力作用下的钛酸铋的弹性吉布斯自由能的表达式，并导出了自发应变，介电性质和压电性质。     

嫖宿幼女罪构成要件探讨

司法解释构成嫖宿幼女罪必须要具备明知要件,这种解释违背了立法本意,不利于实际司法操作,不利于对此种犯罪行为的打击.     

铝合金加工用刀具的使用研究（三）

当前我国各机械加工生产厂家引进国外进口设备及生产线较多，实现引进设备及生产线上刀具的国产化以降低生产成本，成为当前国内整个机械加工领域亟待解决的问题。     

溶胶-凝胶法制备SiO2-P2O5-TiO2粉体

采用溶胶-凝胶工艺制备出平均尺寸为0.109μm的SiO2-P2O5-TiO2细小均匀的粉体。通过XRD、SEM、热重分析发现,粉体中存在着包裹在颗粒周围的无定形二氧化硅膜,能有效的抑制水解时磷和钛的副反应发生,改善了粉体的化学稳定性,并且该粉体具有良好的吸湿性,适合于制备电解质薄膜。     

The Development of Materials for the Production of Hydrogen from Bio-ethanol

1 Results There is an increased interest in the hydrogen production from renewable sources. In this context, recently, numerous studies which use ethanol for hydrogen production have appeared. Ethanol is easily handled, non-toxic, and it can be obtained from biomass. The steam-reforming of bioethanol has been shown to beeffective for hydrogen production:C2H5OH 3 H2O  6 H2 2 CO2. Six moles of hydrogen can be yielded for each mole of ethanol reacted. However, depending on the catalyst used, other und...     

钙和钡对钢脱氧及夹杂变性的理论分析

在比较了各种常用脱氧剂单质脱氧能力的基础上，对钙合金、钡合金夹杂的变性能力进行了理论分析和探讨，并对钡合金的脱氧和夹杂物变性工艺提出了建议。