Effect of Al on microstructure and mechanical properties of as-extruded Mg–1Mn alloy sheet

The effect of Al addition on microstructure and mechanical properties of hot extruded Mg–1 Mn alloy sheet was investigated. The results revealed that the dynamic recrystallization was promoted by increasing Al content. The ultimate tensile strength and yield strength of the alloy increased with the increase of Al content. The Mg–9 Al–1 Mn alloy exhibited the highest strength, with tensile strength of 308 MPa, 307 MPa, 319 MPa, yield strength of 199 MPa, 207 MPa, 220 MPa and the elongation of 20.9%, 20.1%, 19.2% in 0°, 45°, 90°, respectively.The high strength was mainly attributed to the formation of fine dynamically recrystallized grains and large amounts of the second phase. The strengthening mechanism of the alloys was explained.     

Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

DEGREE CONDITIONS FOR GRAPHS TO BE FRACTIONAL （a, b, n）-CRITICAL GRAPHS

Let G be a graph, and a and b be integers with a ≤ b. A graph G is called a fraetional （a, b, n）-critical graph if after any n vertices of G are deleted the remaining subgraph has a fractional [a, b]-factor. In this paper two degree conditions for graphs to be fractional （a, b, n）-eritical graphs are presented, and the degree conditions are sharp in some sense.     

用正交试验法确定最佳调剖施工参数

针对文明寨油田地质特征和开采现状，按照油藏数值模拟原理，以调剖井对应油井的增油降水创经济效益大小为考核指标，运用正交试验的均衡分散性和整齐可比性及Ｌ９（３４），正交表进行调剖最佳施工参数试验．经现场试验、分析、讨论发现：影响调剖效果的主要因素是措施半径，其次为施工排量和注入方式，且最佳施工参数是措施半径在３．５ｍ左右，施工排量在１９ｍ３／ｈ左右，按连续注入方式调剖。经文明察油田、卫城油田、马寨油田５０井次现场试验证明，较好地改善了注水井吸水剖面，对应油井取得了明显的增油降水效果，收到了较好的经济和社会效益．     

铝合金加工用刀具的使用研究（三）

当前我国各机械加工生产厂家引进国外进口设备及生产线较多，实现引进设备及生产线上刀具的国产化以降低生产成本，成为当前国内整个机械加工领域亟待解决的问题。     

噬菌体展示禽流感病毒抗原变异性基因片段文库的构建

构建T7噬菌体展示禽流感病毒抗原变异性基因片段文库. 首先， 从Gene Bank中查找筛选禽流感病毒抗原变异性基因, 将其截短、 修饰、 简并后得到禽流感病毒抗原变异性基因微阵列. 其次， 将合成的禽流感病毒抗原变异性基因片段文库扩增、 酶切, 链接到双酶切后的T7噬菌体载体基因上, 构成重组噬菌体DNA. 最后， 重组噬菌体DNA经体外包装和扩增, 得到T7噬菌体展示文库, 并进行T7噬菌体展示文库滴度、 重组率和免疫活性测定. 实验结果表明, 从Gene Bank中查找、 筛选、 剪切和修饰共获得96 258条序列构建T7噬菌体展示文库, 原始文库滴度为3.6×107个菌落/mL, 重组率大于90%. 用禽流感病毒H5N1抗体进行捕获, 经聚合酶链式反应(PCR)鉴定, 得到理想目的条带, 证明噬菌体表面展示蛋白具有抗原活性, 可用于禽流感病毒感染患者的快速检测及抗原表位筛选.     

三球式和转台式角动量守恒演示器的研制与应用

本文详细介绍了笔者研制的三球式和转台式两种新型角动量守恒演示器的结构、特点和使用方法。     

微波辐射合成7-羟基-4-甲基香豆素

以浓硫酸为催化剂，采用微波辐射技术，由间苯二酚与乙酰乙酸乙酯缩合制备7－羟基－4－4甲基香豆素。结果表明，微波辐射合成7－羟基－4－4甲基香豆素的最以应条件为：间苯二酚5.5g，乙酰乙酸乙酯6.8ml，浓硫酸1.5ml，微波功率240W，微波辐射时间6min，产率84．1％，不采用微波辐射，反应时间大于10h，产率78％，红外光谱分析表明，7－羟基－4－4甲基香豆素的特征峰与7－羟基－4－甲基香豆素的各官能团的吸收峰吻合，测定7－羟基－4－甲基香豆素的熔点为189－192℃。     

电磁相分离法制备自生表层复合材料

采用电磁相分离法制备出以初生富铁相（AlSiFeMn复杂金属间化合物）为增强相，表层硬度为HB62．25，基体硬度为HB59．00的Al-11.70%Si-1.20?-1.50%Mn合金自生表层复合材料，增强相的显微硬度为HV 842。87，大小为20－80μm，该表层复合材料同基体材料相比，耐磨性提高了57．41％，所用方法工艺过程简单，成本低，为解决材料在服役环境中不同部位，不同性能的问题提供了新途径。     

一类新型双杂环衍生物的合成及其杀菌活性

三唑并嘧啶类杂环衍生物由于其分子结构中同时包含了三唑及嘧啶这两类重要的活性结构单元 ,因而往往表现出广泛的生物活性[1～ 4] ,既可以用于医药 ,也可以用于农药 .因此 ,近年来关于三唑并嘧啶类衍生物的合成及其生物活性的研究受到了人们的广泛关注 -二甲基 - 1 ,2 ,4-三唑