浅谈预算编制改革与预算执行改革

针对传统预算编制方法与预算执行机制中存在的突出问题,浅谈如何同步推进预算编制改革与预算执行改革。     

新的基团法估算沸点下蒸发焓

提出了估算沸点下蒸发焓的含基团重量分率的基团法和估算式，拟合团贡献值，对３８５种有机物的计算平均偏差约为１．５％。所提出的新方法明显优于３种对应状态和用蒸发熵的基团法。     

针形锂电池CR425的研制

采用Li—MnO2电池材料和工艺制造CR425锂电池．重点对正极活性物质的加工制备及电池组装工艺进行了试验和改进．通过XRD试验测试了热处理前后电解二氧化锰(EMD)的结构，对制备的电池在不同温度下进行恒电流和恒电阻放电，并对贮存1周、3个月和6个月电池的开路电压、短路电流、内阻及放电容量进行了测试．结果表明，电池性能完全满足CR425锂电池的技术要求，可作为夜间钓鱼时的发光浮标或商务通用笔夜间使用时的照明电源．     

Joint Strength with Soldering of Al2O3 Ceramics After Ni-P Chemical Plating

Ni-P alloy was chemically plated on Al2O3 ceramics to produce uniform alloy coatings at temperatures below 70~C. Cu metal was electroplated onto the Ni-P coating to facilitate the soldering and shorten the chemical plating time. Then, the electroplated ceramic specimens were soldered with 60 wt.% Sn-40 wt.% Pb solder in active colophony. The highest shear strength was acquired after the heat treatment at 170℃ for 15 min. The joint fractures mostly propagated along the interface between the ceramics and the Ni-P coating, with some fracture in both the ceramics and the Ni-P coating near the interface and some along the interface between the Cu and Ni-P coatings. The results show that ceramic surface roughness and the chemical plating parameters influence the coating quality, and that suitable heat treatment before the soldering also improves the adhesion between the ceramics and Ni-P coatings, thus strengthening the joints.     

早产合并胎膜早破96例分析

目的 :探讨早产合并胎膜早破的处理方法 ,减少围生儿死亡。方法 :对96例确诊为早产合并胎膜早破的产妇进行回顾性分析。结果 :未保胎51例 ,保胎45例 ,21例保胎成功 ,占46 7%。围生儿情况 :孕周≤34w 6 者 ,围生儿死亡率高于孕周>35周者 ,围生儿窒息率孕周≤34w 6者高于孕周>35w者。结论 :恰当处理早产合并胎膜早破是减少围生儿窒息和死亡的关键     

GCr15刀轴的断裂分析

本文对佳木斯市制药机械厂生产的制丸机刀轴在装机前出现断裂现象进行了分析,指出原热处理工艺中所采用的冷却介质不当是导致断裂的主要原因。     

闸河区周边重合断裂方位分布特征及其导水趋势分析

本文应用了遥感这一先进工具,在地壳表层现实资料及地球遥感影象特征基础上,发展了遥感地质灾害方面研究新理论——重合断裂方位破裂理论,来为防治水害直接提供导水断裂趋势分布特征.     

正弦性质定理和切点单形几何不等式的推广

推广了文[1] 中的正弦性质定理及文[2 ] 中关于切点单形的一个几何不等式 ,即得到了下面的两个定理     

THE TRANSFER BEHAVIOUR OF SOME CATIONS AT WATER／NITROBENZENE INTERFACE BY SEMIDIFFERENTIAL CYCLIC VOLTAMMETRY

The transfer of Sr~(2+) and Ba~(2+) ion, facilitated by 18-Crown-6 present in the aqueous phase, and of succinylcholine ion at w/nb interface were investigated by semi-differential cyclic voltammetry. A good polarographic curve of succinylcholine ion dissolved in water was obtained in the system of 0.01 mol/l LiCl (w)——0.01 mol/l TBATPB (nb). The peak current is directly proportional to the concentration of SC~(2+) ion. It can be used for the determination of SC and the detection limit is 1.05×10~(-5) mol/l.The apparent D~w and D~(nb) have been estimated. The transfer of Sr~(2+) and of Ba~(2+) at the interface are facilitated by 18-Crown-6 present in the aqueous phase and the peak current is directly proportional to the concentration of 18-Crown-6 in water. This method can be used for the determination of the complexing agent and for the stability constant of the complex formed in the aqueous phase.All the experimental results are in keeping with the theoretical.     

土体加、卸载土工参数的区别

围绕卸荷问题研究了卸载土体抗剪强度、静止土压力系数及回弹模量等的变化规律,并就土体加、卸载状态的区别进行了分析,意在强调加、卸载土工参数的选取应有所不同.