基于40Cr高温动态力学性能的磨削表面动态再结晶行为

通过分离式霍普金森压杆(SHPB)实验得到了40Cr合金钢在高温高应变率下真应力-真应变曲线，据此确定了材料发生动态再结晶的临界条件.采用解析法和实验法分别求解了磨削强化层的温度场和塑性应变场分布.结果表明，磨削强化层在磨削深度方向具有较大的温度和塑性应变梯度;150μm强化层内会发生奥氏体转变;磨削表面最高温度可达1060℃.在磨削亚表面60μm内会产生剧烈的塑性变形，达到了再结晶的临界条件.较大的磨削深度使磨削强化层塑性应变增大，再结晶现象越充分，微观组织细化程度越高.     

螺栓连接大变形梁非线性振动特性的实验研究

柔性机械臂、大型可展开天线等机械结构的动作精度受运动过程中大变形几何非线性和连接处接触非线性的影响十分显著。以含螺栓连接结构的大变形梁作为研究对象，针对动力学建模和振动特性开展了实验研究，通过数值计算验证了实验发现的非线性振动特性。搭建了含螺栓连接柔性大变形梁的实验台架，开展了敲击和正弦激振的实验测试。实验结果表明，螺栓连接的柔性梁较连续梁的（无螺栓连接）模态频率降低，阻尼增加，反映出随着激励能量增大，模态频率降低的非线性模态特征。改变螺栓连接位置会显著影响结构的模态频率，其变化规律可由求解线性矩阵特征值定性反映。     

基于动态优化双钻头打孔机生产效能的研究

首先,对孔型加工及走刀方式进行分析,为提高打孔机效能,采用两钻头同时作业的方式。然后,根据相关的数据,应用动态优化的相关理论建立数学模型,并运用遗传算法进行求解,从而确立了双钻头作业时的最优作业线路、最佳行进时间和作业成本,并用MATLAB编写程序画出了相应图形,更加形象地显现出了各个路段的最优作业方案。     

Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

考虑引入渠道竞争的双渠道信号传递策略

在一个存在高低两种类型制造商的供应链中,通过对制造商向零售商进行信号传递策略的研究,把制造商引入渠道竞争的动机解释为"渠道竞争"及"信息非对称"两种效应.把零售商努力纳入需求函数,建模分析了不完全信息条件下单(双)渠道供应链中制造商通过调整入场费和批发价进行信号传递的决策.并在此基础上通过两种渠道模式下供应链成员决策参数的对比,重点分析了渠道入侵对信号传递策略两种效应的综合影响.研究发现:两种模式下,制造商都需要通过向上扭曲批发价、降低支付给零售商的入场费来进行信号传递,同时零售商会减少附加值服务的提供;但当满足一定条件时,制造商可以通过引入线上直销渠道降低批发价向上扭曲的概率(即更容易实现自然分离),并减少信号传递成本;产品需求波动性、需求对零售商提供附加服务的敏感性以及渠道间竞争强度都将在一定程度上影响引入渠道竞争的效果.     

Dynamic Model Averaging and CPI Inflation Forecasts: A Comparison between the Euro Area and the United States

The paper forecasts consumer price inflation in the euro area (EA) and in the USA between 1980:Q1 and 2012:Q4 based on a large set of predictors, with dynamic model averaging (DMA) and dynamic model selection (DMS). DMA/DMS allows not solely for coefficients to change over time, but also for changes in the entire forecasting model over time. DMA/DMS provides on average the best inflation forecasts with regard to alternative approaches (such as the random walk). DMS outperforms DMA. These results are robust for different sample periods and for various forecast horizons. The paper highlights common features between the USA and the EA. First, two groups of predictors forecast inflation: temporary fundamentals that have a frequent impact on inflation but only for short time periods; and persistent fundamentals whose switches are less frequent over time. Second, the importance of some variables (particularly international food commodity prices, house prices and oil prices) as predictors for consumer price index inflation increases when such variables experience large shocks. The paper also shows that significant differences prevail in the forecasting models between the USA and the EA. Such differences can be explained by the structure of these respective economies. Copyright © 2015 John Wiley & Sons, Ltd.     

三门峡水库电站运行调度的优化研究

三门峡水库泥沙淤积严重，使其枢纽的各项技术指标经常变化，为其调度运行带来极大困难。为此，充分考虑三门峡水电站运行过程中的各种约束条件，分别采用动态规划和遗传算法给出了电站优化调度模型，建立了该电站的运行调度系统。经过水库1991年—2000年实际来水和控制运行的月报资料的模拟验证，结果表明，该系统可平均增加发电量约12．9％，使电站能更合理地进行管理调度。而且，通过对随机模拟的长序列入库月径流过程的模拟调度，建议了三门峡水电站具体的管理调度运行方式。     

保密通信新介质--人工神经网络

根据人工神经网络的结构特点和信息传输与处理特征，提出了利用物理神经网络作为通信信道的观点．在分析了现有通信信道物理模型之后，具体讨论了作为通信信道的神经网络的可能拓朴结构、神经网络学习要点、允许传输信号的模式特征，研究了神经网络信道的传输延时、通信带宽及信噪比，分析了神经网络信道处理多媒体信号的计算潜力，并着重剖析了神经网络信道固有的保密通信特征．最后给出了一个具体的神经网络信道设计实例．     

利用有限元法进行塔机起重臂的动态分析

根据塔机起重臂的实际结构 ,建立双弹簧悬吊超静定简支梁的力学模型 ,进行动态分析 ,并以TC80型塔式起重机为例 ,利用有限元方法求解 ,引入梁单元和边界单元 ,得到塔机起重臂的多阶固有频率和主振型 ,其结果对于塔机的动态响应分析具有实际意义     

编队协同对地攻防对抗多级动态决策方法研究

针对编队协同对地攻击的攻防对抗系统的强对抗性、多目标性和多层次性,运用军事对抗的动态状态空间模型,建立了主从递阶互动决策模型——Nash-Stackelberg-Nash决策模型,重点解决军事对抗中寻求多级动态决策的联合最优策略问题。仿真结果表明,该决策模型应用于编队协同对地攻防对抗决策系统,良好的解决了两级对抗动态决策问题,并达到了较好的作战效果,能够为作战对抗提供有力的战场分析依据。