In situ backscattered electron imaging study of the effect of annealing on the deformation behaviors of Ni electroformed from additive-free and saccharin-containing sulfamate solutions

The Ni samples were electroformed from additive-free(AF) and saccharin-containing(SC) sulfamate solutions, respectively. In situ backscattered electron(BSE) imaging, electron backscatter diffraction(EBSD), and electron-probe microanalysis(EPMA) were used to investigate the effect of annealing on the deformation behaviors of the AF and SC samples. The results indicate that columnar grains of the as-deposited AF sample had an approximated average width of 3 μm and an approximated aspect ratio of 8. The average width of columnar grains of the as-deposited SC sample was reduced to approximately 400 nm by the addition of saccharin to the electrolyte. A few very-large grains distributed in the matrix of the SC sample after annealing. No direct evidence indicated that S segregated at the grain boundaries before or after annealing. The average value of the total elongations of the SC samples decreased from 16% to 6% after annealing, whereas that of the AF samples increased from 18% to 50%. The dislocation recovery in grain-boundary areas of the annealed AF sample was reduced, which contributed to the appearance of microvoids at the triple junctions. The incompatibility deformation between very-large grains and fine grains contributed to the brittle fracture behavior of the annealed SC Ni.     

SHARPIN is a component of the NF-κB-activating linear ubiquitin chain assembly complex

Cpdm (chronic proliferative dermatitis) mice develop chronic dermatitis and an immunodeficiency with increased serum IgM, symptoms that resemble those of patients with X-linked hyper-IgM syndrome and hypohydrotic ectodermal dysplasia (XHM-ED), which is caused by mutations in NEMO (NF-κB essential modulator; also known as IKBKG). Spontaneous null mutations in the Sharpin (SHANK-associated RH domain interacting protein in postsynaptic density) gene are responsible for the cpdm phenotype in mice. SHARPIN shows significant similarity to HOIL-1L (also known as RBCK1), a component of linear ubiquitin chain assembly complex (LUBAC), which induces NF-κB activation through conjugation of linear polyubiquitin chains to NEMO. Here, we identify SHARPIN as an additional component of LUBAC. SHARPIN-containing complexes can linearly ubiquitinate NEMO and activated NF-κB. Thus, we re-define LUBAC as a complex containing SHARPIN, HOIL-1L, and HOIP (also known as RNF31). Deletion of SHARPIN drastically reduced the amount of LUBAC, which resulted in attenuated TNF-α- and CD40-mediated activation of NF-κB in mouse embryonic fibroblasts (MEFs) or B cells from cpdm mice. Considering the pleomorphic phenotype of cpdm mice, these results confirm the predicted role of LUBAC-mediated linear polyubiquitination in NF-κB activation induced by various stimuli, and strongly suggest the involvement of LUBAC-induced NF-κB activation in various disorders.     

Eukaryotic initiation factor 6 is rate-limiting in translation, growth and transformation

Cell growth and proliferation require coordinated ribosomal biogenesis and translation. Eukaryotic initiation factors (eIFs) control translation at the rate-limiting step of initiation. So far, only two eIFs connect extracellular stimuli to global translation rates: eIF4E acts in the eIF4F complex and regulates binding of capped messenger RNA to 40S subunits, downstream of growth factors, and eIF2 controls loading of the ternary complex on the 40S subunit and is inhibited on stress stimuli. No eIFs have been found to link extracellular stimuli to the activity of the large 60S ribosomal subunit. eIF6 binds 60S ribosomes precluding ribosome joining in vitro. However, studies in yeasts showed that eIF6 is required for ribosome biogenesis rather than translation. Here we show that mammalian eIF6 is required for efficient initiation of translation, in vivo. eIF6 null embryos are lethal at preimplantation. Heterozygous mice have 50% reduction of eIF6 levels in all tissues, and show reduced mass of hepatic and adipose tissues due to a lower number of cells and to impaired G1/S cell cycle progression. eIF6(+/-) cells retain sufficient nucleolar eIF6 and normal ribosome biogenesis. The liver of eIF6(+/-) mice displays an increase of 80S in polysomal profiles, indicating a defect in initiation of translation. Consistently, isolated hepatocytes have impaired insulin-stimulated translation. Heterozygous mouse embryonic fibroblasts recapitulate the organism phenotype and have normal ribosome biogenesis, reduced insulin-stimulated translation, and delayed G1/S phase progression. Furthermore, eIF6(+/-) cells are resistant to oncogene-induced transformation. Thus, eIF6 is the first eIF associated with the large 60S subunit that regulates translation in response to extracellular signals.     

Filamentary structure on the Sun from the magnetic Rayleigh-Taylor instability

Magnetic flux emerges from the solar surface as dark filaments connecting small sunspots with opposite polarities. The regions around the dark filaments are often bright in X-rays and are associated with jets. This implies plasma heating and acceleration, which are important for coronal heating. Previous two-dimensional simulations of such regions showed that magnetic reconnection between the coronal magnetic field and the emerging flux produced X-ray jets and flares, but left unresolved the origin of filamentary structure and the intermittent nature of the heating. Here we report three-dimensional simulations of emerging flux showing that the filamentary structure arises spontaneously from the magnetic Rayleigh-Taylor instability, contrary to the previous view that the dark filaments are isolated bundles of magnetic field that rise from the photosphere carrying the dense gas. As a result of the magnetic Rayleigh-Taylor instability, thin current sheets are formed in the emerging flux, and magnetic reconnection occurs between emerging flux and the pre-existing coronal field in a spatially intermittent way. This explains naturally the intermittent nature of coronal heating and the patchy brightenings in solar flares.     

Lipid-protein interactions in double-layered two-dimensional AQP0 crystals

Lens-specific aquaporin-0 (AQP0) functions as a specific water pore and forms the thin junctions between fibre cells. Here we describe a 1.9 A resolution structure of junctional AQP0, determined by electron crystallography of double-layered two-dimensional crystals. Comparison of junctional and non-junctional AQP0 structures shows that junction formation depends on a conformational switch in an extracellular loop, which may result from cleavage of the cytoplasmic amino and carboxy termini. In the centre of the water pathway, the closed pore in junctional AQP0 retains only three water molecules, which are too widely spaced to form hydrogen bonds with each other. Packing interactions between AQP0 tetramers in the crystalline array are mediated by lipid molecules, which assume preferred conformations. We were therefore able to build an atomic model for the lipid bilayer surrounding the AQP0 tetramers, and we describe lipid-protein interactions.     

Photomechanics: directed bending of a polymer film by light

Polymer solutions and solids that contain light-sensitive molecules can undergo photo-contraction, whereby light energy is converted into mechanical energy. Here we show that a single film of a liquid-crystal network containing an azobenzene chromophore can be repeatedly and precisely bent along any chosen direction by using linearly polarized light. This striking photomechanical effect results from a photoselective volume contraction and may be useful in the development of high-speed actuators for microscale or nanoscale applications, for example in microrobots in medicine or optical microtweezers.     

Methane emissions from wetlands on the Qinghai-Tibet Plateau

The areal extent of cold freshwater wetlands on the Qinghai-Tibet Plateau (QTP) is estimated at 0.133 × 10⁶ km², suggesting a significant methane potential. Methane fluxes from wet alpine meadows, peatlands,Hippuris vulgaris mires and secondary marshes were 43.18, 12.96, −0.28 and 45.90 mg · m⁻² · d⁻¹, respectively based on the transect flux studies at the Huashixia Permafrost Station (HPS) from July to August 1996. Average CH₄ fluxes in the thaw season were extrapolated at 5.68 g · m⁻² according to the areal percentage of wetland areas in the Huashixia region. The CH₄ fluxes at four fixed sites, representative of similar ecosystems, ranged from −19.384–347.15 mg · m⁻² · d⁻¹, and the average CH₄ fluxes varied from 6.54 to 71.97 mg · m⁻² · d⁻¹ at each site during the observation period from April to September 1997. The CH₄ emissions at each site during the entire thaw season was estimated from 1.21 to 10.65 g · m⁻², displaying strong spatial variations. Seasonal variations of CH₄ fluxes also were observed at four sites: CH₄ outbursts occurred upon the spring thaw in May and June, CH₄ fluxes increased afterwards with rising soil temperatures. Episodic fluxes were observed in summer, which influenced the average CH₄ fluxes considerably. Annual CH₄ emissions from cold wetlands on the QTP were estimated at about 0.7–0.9 Tg based on the distribution of wetlands, representative CH₄ fluxes, and number of thaw days. The centers of CH₄ releasing were located in the sources of the Yangtze and Yellow rivers, and Zoigê Peatlands.     

Atomic-beam alignment of inorganic materials for liquid-crystal displays

The technique used to align liquid crystals-rubbing the surface of a substrate on which a liquid crystal is subsequently deposited-has been perfected by the multibillion-dollar liquid-crystal display industry. However, it is widely recognized that a non-contact alignment technique would be highly desirable for future generations of large, high-resolution liquid-crystal displays. A number of alternative alignment techniques have been reported, but none of these have so far been implemented in large-scale manufacturing. Here, we report a non-contact alignment process, which uses low-energy ion beams impinging at a glancing angle on amorphous inorganic films, such as diamond-like carbon. Using this approach, we have produced both laptop and desktop displays in pilot-line manufacturing, and found that displays of higher quality and reliability could be made at a lower cost than the rubbing technique. The mechanism of alignment is explained by adopting a random network model of atomic arrangement in the inorganic films. Order is induced by exposure to an ion beam because unfavourably oriented rings of atoms are selectively destroyed. The planes of the remaining rings are predominantly parallel to the direction of the ion beam.