Banach 3-Lie代数上两类映射的稳定性

结合函数方程pf(x+y/p+z)=f(x)+f(y)+pf(z),研究了Banach 3-Lie代数上的同态、导子以及广义导子的广义Hyers-Ulam稳定性(其中p为固定正整数).     

自动驾驶汽车车底边框的优化算法

为了对通过YOLO框架所提取出的汽车底边框进行优化,首先对于道路上的每一辆汽车底部部分像素块建立改进后的高斯混合模型,通过该模型来刻画道路灰度值以及车底阴影灰度值的正态分布规律,然后通过对每辆检测到的汽车进行自上而下的扫描算法以确定汽车边框的实际高度,最后通过进行路测实验来说明算法的可行性与准确性.     

南京长江第四大桥钢箱梁铺装层温度影响系数分析

为了减少现有的钢桥面铺装层车辙深度预估的误差,提出基于长期实测数据的钢桥面铺装车辙评估模型的温度影响系数计算公式。首先对南京长江第四大桥的实测温度概率统计后采用双高斯函数表征其分布;在此基础上修正了现有车辙评估模型中的温度影响系数公式,并利用车辙实测数据对车辙评估模型计算值进行验证。研究结果表明:钢箱梁复合浇筑式铺装层温度可通过双高斯分布描述其概率分布;计入温度影响系数的车辙深度与实际车辙值之间误差较小,相对误差为15.2%。     

Forecasting the duration of short‐term deflation episodes

The paper proposes a simulation‐based approach to multistep probabilistic forecasting, applied for predicting the probability and duration of negative inflation. The essence of this approach is in counting runs simulated from a multivariate distribution representing the probabilistic forecasts, which enters the negative inflation regime. The marginal distributions of forecasts are estimated using the series of past forecast errors, and the joint distribution is obtained by a multivariate copula approach. This technique is applied for estimating the probability of negative inflation in China and its expected duration, with the marginal distributions computed by fitting weighted skew‐normal and two‐piece normal distributions to autoregressive moving average ex post forecast errors and using the multivariate Student t copula.     

大尺寸工程模型试验中的相似材料配比试验研究

大型物理模型试验是研究复杂工程问题的重要方法，如何快速、准确地确定相似材料配比是试验中至关重要的一环.为降低试验成本、简化试验步骤、充分调用原料性能，采用河砂、水泥和石膏这三种最普通的原料，以骨胶比(河砂与水泥石膏的质量比)和水膏比(水泥与石膏的质量比)为变量，进行了45组对比试验，对相似材料的物理及动、静力学参数进行了研究.获得了以河砂、水泥和石膏为原料配制的相似材料各物理量的变化区间；探讨了骨胶比和水膏比对相似材料各物理量的控制作用，并对比了其敏感性；基于多元线性回归分析建立了各因素与物理量间的定量关系，得到的拟合公式能较好地描述相似材料的性质.     

Blockage of the NLRP3 inflammasome by MCC950 improves anti-tumor immune responses in head and neck squamous cell carcinoma

The NLRP3 inflammasome is a critical innate immune pathway responsible for producing active interleukin (IL)-1β, which is associated with tumor development and immunity. However, the mechanisms regulating the inflammatory microenvironment, tumorigenesis and tumor immunity are unclear. Herein, we show that the NLRP3 inflammasome was over-expressed in human HNSCC tissues and that the IL-1β concentration was increased in the peripheral blood of HNSCC patients. Additionally, elevated NLRP3 inflammasome levels were detected in tumor tissues of Tgfbr1/Pten 2cKO HNSCC mice, and elevated IL-1β levels were detected in the peripheral blood serum, spleen, draining lymph nodes and tumor tissues. Blocking NLRP3 inflammasome activation using MCC950 remarkably reduced IL-1β production in an HNSCC mouse model and reduced the numbers of myeloid-derived suppressor cells (MDSCs), regulatory T cells (Tregs) and tumor-associated macrophages (TAMs). Moreover, inhibiting NLRP3 inflammasome activation increased the numbers of CD4⁺ and CD8⁺ T cells in HNSCC mice. Notably, the numbers of exhausted PD-1⁺ and Tim3⁺ T cells were significantly reduced. A human HNSCC tissue microarray showed that NLRP3 inflammasome expression was correlated with the expression of CD8 and CD4, the Treg marker Foxp3, the MDSC markers CD11b and CD33, and the TAM markers CD68 and CD163, PD-1 and Tim3. Overall, our results demonstrate that the NLRP3 inflammasome/IL-1β pathway promotes tumorigenesis in HNSCC and inactivation of this pathway delays tumor growth, accompanied by decreased immunosuppressive cell accumulation and an increased number of effector T cells. Thus, inhibition of the tumor microenvironment through the NLRP3 inflammasome/IL-1β pathway may provide a novel approach for HNSCC therapy.     

基于滑移/非滑移异质界面的动压润滑性能优化

合理布置的滑移/非滑移异质界面可以提高流体动压润滑性能,但目前滑移区和非滑移区的组合方式大多采用单一的直线拼接法,没有针对流体润滑摩擦副的各类工况设计出相应的优化方案,为此本文建立了一组离散式二次方程来描述滑移区和非滑移区拼接轨迹,并引入计算域单元的宽长比作为优化变量,分别以液膜刚度和摩擦因数作为优化目标,通过MATLAB数值仿真求解不同宽长比条件下滑移区和非滑移区的最优拼接轨迹。结果表明,与直线拼接法相比,选取二次方程所描述的抛物线作为滑移区和非滑移区拼接轨迹的方法使流体润滑摩擦副在摩擦因数和液膜刚度等性能指标上都有所改善,而且根据不同的优化目标参数可以方便地绘制出最优拼接方案,验证了本文方法在改善动压润滑性能上的可行性和普适性。     

Mechanical and corrosion properties of low-carbon steel prepared by friction stir processing

Low-carbon steel plates were successfully subjected to normal friction stir processing(NFSP) in air and submerged friction stir processing(SFSP) under water, and the microstructure, mechanical properties, and corrosion behavior of the NFSP and SFSP samples were investigated. Phase transformation and dynamic recrystallization resulted in fine-grained ferrite and martensite in the processed zone. The SFSP samples had smaller ferrites(5.1 μm), finer martensite laths(557 nm), and more uniform distribution of martensite compared to the NFSP samples. Compared to the base material(BM), the microhardness of the NFSP and SFSP samples increased by 19.8% and 27.1%, respectively because of the combined strengthening effects of grain refinement, phase transformation, and dislocation. The ultimate tensile strengths(UTSs) of the NFSP and SFSP samples increased by 27.1% and 38.7%, respectively. Grain refinement and martensite transformation also improved the electrochemical corrosion properties of the low-carbon steel. Overall, the SFSP samples had better mechanical properties and electrochemical corrosion resistance than the NFSP samples.     

海底观测网络数据管理系统设计

针对海底观测网数据管理的需求，建立了数据管理系统的功能模型，设计了数据通信、设备管理、故障诊断及数据质量控制等关键技术的相关实现算法。综合运用Socket网络编程、MySQL数据库技术，依据模块化的设计思想，开发了海底观测网数据管理系统。海试结果表明，该系统实现了对海底观测网的实时数据采集、状态监控、数据分类存储和数据共享等功能，具有长期运行稳定可靠、可扩展性强的优点。     

大入射余角CFAR检测器

雷达在大入射余角高分辨率海杂波背景下检测时,等效后向散射面积增大,大部分海杂波能量投射到少数距离单元,能量分布不均,出现功率突然增大的杂波“异常单元”,导致检测器参考窗口所处的背景环境复杂多变,传统检测器检测概率降低,虚警率及误检率增加。为解决此问题,通过参考滑窗单元的协方差矩阵构造正定矩阵,求解其矩阵范数用以估计杂波功率水平,并采用支持向量机改进传统恒虚警率(constant false alarm rate,CFAR)检测器,得到基于正定矩阵杂波功率估计训练支持向量机的改进CFAR检测器。实验结果表明,新检测器在均匀杂波、多目标环境下检测性能稳定,在杂波边缘的虚警控制能力良好。