A TEM study on the microstructure of spark plasma sintered ZrB_2-based composite with nano-sized SiC dopant

Sintering behavior of ZrB_2 ceramic with nano-sized SiC dopant was studied. ZrB_2-25 vol% nano-sized SiC was selected as the starting mixture to fabricate the composite. The manufacturing process was accomplished at 1800℃ for 5 min under 25 MPa via spark plasma sintering(SPS). The as-sintered sample reached a relative density of 99%. Besides the initial phases, namely ZrB_2 and SiC, the high-resolution X-ray diffraction(HRXRD) was used to study the formation of an in-situ ZrC phase. The possible chemical interactions during the ZrC phase formation were scrutinized. The microstructure of the composite was studied by the field emission scanning electron microscopy(FESEM) and transmission electron microscopy(TEM). Elemental analysis through FESEM evaluations revealed the formation of amorphous phases, rich in Zr, C, Si, B, and O elements, which was in harmony with the thermodynamical assessments. TEM studies endorsed the formation of such phases, containing a glassy bed of Si–B–O with ZrC and C islands dispersed therein.     

Genetically modified Plasmodium parasites as a protective experimental malaria vaccine

Malaria is a mosquito-borne disease that is transmitted by inoculation of the Plasmodium parasite sporozoite stage. Sporozoites invade hepatocytes, transform into liver stages, and subsequent liver-stage development ultimately results in release of pathogenic merozoites. Liver stages of the parasite are a prime target for malaria vaccines because they can be completely eliminated by sterilizing immune responses, thereby preventing malarial infection. Using expression profiling, we previously identified genes that are only expressed in the pre-erythrocytic stages of the parasite. Here, we show by reverse genetics that one identified gene, UIS3 (upregulated in infective sporozoites gene 3), is essential for early liver-stage development. uis3-deficient sporozoites infect hepatocytes but are unable to establish blood-stage infections in vivo, and thus do not lead to disease. Immunization with uis3-deficient sporozoites confers complete protection against infectious sporozoite challenge in a rodent malaria model. This protection is sustained and stage specific. Our findings demonstrate that a safe and effective, genetically attenuated whole-organism malaria vaccine is possible.     

Improvement of corrosion performance of 316L stainless steel via PVTMS/henna thin film

Metallic materials are the most used materials as orthopedic or dental implants due to their excellent mechanical properties. However they are not able to create a natural bonding with the mineralized bone and occasionally suffer localized corrosion. This work describes the electrochemical behavior of a hybrid sol–gel thin film with the addition of green inhibitor. These films enhance the ability of the implant to make a union with the existing bone and improve its resistance to aggressive environment. An ethanol solution of the polymerized vinyltrimethoxysilane (PVTMS) was mixed with an aqueous solution of henna extract (Lawsonia inermis) and refluxed to give homogeneous sols. Nanostructure hybrid PVTMS/henna thin films were deposited on the stainless steel 316L by spin-coating. The morphology, composition and adhesion of hybrid sol–gel coatings have been examined by SEM, EDX and pull-off test, respectively. Addition of high additive concentrations (0.1%) did not disorganize the sol–gel network. Direct pull-off test recorded a mean coating-substrate bonding strength larger than 20.6 MPa for the hybrid sol–gel coating. The effect of henna extract, with various added concentrations from 0.012% to 0.1%, on the anticorrosion properties of sol–gel films have been characterized by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization tests in simulated body fluid (SBF) solution and has been compared to the bare metal. Henna extract additions (0.05%) have significantly increased the corrosion protection of the sol–gel thin film to higher than 90%. The in vitro bioactivity of prepared films indicates that hydroxyapatite nuclei can form and grow on the surface of the doped sol–gel thin films. The present study shows that due to their excellent anticorrosion properties, bioactivity and bonding strength to substrate, doped sol–gel thin films are practical hybrid films in biomedical applications.     

Shift-contagion in energy markets and global crisis

This paper presents an analysis of shift-contagion in energy markets, testing whether linkages between returns in energy markets increase during crisis periods. The research presented herein demonstrates how common movement between energy markets increases due to (i) shift-contagion across energy markets, reflected by structural transmission of shocks across markets and (ii) larger common shocks operating through standard cross-market interdependences. A regime-switching model was developed to detect shift-contagion across energy markets. In the approach adopted herein, the occurrence of shift-contagion is endogenously estimated rather than being exogenously assigned. The results show that shift-contagion has been a major feature of energy markets over the last decade. Evidence is presented which demonstrates that the linkages between energy markets do not appear to be stable. These results are remarkably accurate for forecasting Brent and natural gas for horizons for up to 50 days. Conversely, for WTI (West Texas Intermediate oil) and coal, the model performs well only for forecasting very short horizons (up to 20 days). For all products, the model shows significant biases for long horizons.     

Hot compression deformation behavior of AISI 321 austenitic stainless steel

The hot compression behavior of AISI 321 austenitic stainless steel was studied at the temperatures of 950–1100℃ and the strain rates of 0.01–1 s?1 using a Baehr DIL-805 deformation dilatometer. The hot deformation equations and the relationship between hot deformation parameters were obtained. It is found that strain rate and deformation temperature significantly influence the flow stress behavior of the steel. The work hardening rate and the peak value of flow stress increase with the decrease of deformation temperature and the increase of strain rate. In addition, the activation energy of deformation (Q) is calculated as 433.343 kJ/mol. The microstructural evolution during deformation indicates that, at the temperature of 950℃ and the strain rate of 0.01 s?1, small circle-like precipitates form along grain boundaries; but at the temperatures above 950℃, the dissolution of such precipitates occurs. Energy-dispersive X-ray analyses indicate that the precipitates are complex carbides of Cr, Fe, Mn, Ni, and Ti.     

Kinetics and mechanism of titanium hydride powder and aluminum melt reaction

Based on the measurement of the released hydrogen gas pressure (P_H2), the reaction kinetics between TiH₂ powder and pure aluminum melt was studied at various temperatures. After cooling the samples, the interface of TiH₂ powder and aluminum melt was studied. The results show that the 2 H P_H2-time curves have three regions; in the first and second regions, the rate of reaction conforms zero and one order, respectively; in the third region, the hydrogen gas pressure remains constant and the rate of reaction reaches zero. The main factors that control the rate of reaction in the first and second regions are the penetration of hydrogen atoms in the titanium lattice and the chemical reaction between molten aluminum and titanium, respectively. According to the main factors that control the rate of reaction, three temperature ranges are considered for the reaction mechanism:(a) 700-750℃, (b) 750-800℃, and (c) 800-1000℃. In the first temperature range, the reaction is mostly under the control of chemical reaction; at the temperature range of 750 to 800℃, the reaction is controlled by the diffusion and chemical reaction; at the third temperature range (800-1000℃), the dominant controlling mechanism is diffusion.     

Deficiency in short-chain fatty acid beta-oxidation affects theta oscillations during sleep

In rodents, the electroencephalogram (EEG) during paradoxical sleep and exploratory behavior is characterized by theta oscillations. Here we show that a deficiency in short-chain acyl-coenzyme A dehydrogenase (encoded by Acads) in mice causes a marked slowing in theta frequency during paradoxical sleep only. We found Acads expression in brain regions involved in theta generation, notably the hippocampus. Microarray analysis of gene expression in mice with mutations in Acads indicates overexpression of Glo1 (encoding glyoxylase 1), a gene involved in the detoxification of metabolic by-products. Administration of acetyl-L-carnitine (ALCAR) to mutant mice significantly recovers slow theta and Glo1 overexpression. Thus, an underappreciated metabolic pathway involving fatty acid beta-oxidation also regulates theta oscillations during sleep.     

Influence of catalyst on structural and morphological properties of TiO2 nanostructured films prepared by sol–gel on glass

Transparent TiO2 thin films have been prepared by the sol-gel method using titanium alkoxides as precursors.Thin films were deposited on glass supports by the dip-coating technique.The TiO2 layer acts as a self-cleaning coating generated from its photocatalysis and photoinduced superhydrophilicity.The crystalline structure of TiO2 films was dominantly identified as the anatase phase,consisted of uniform spherical particles of about 14-50 nm in size,which strongly depends upon catalyst-type and heat treatment temperature.Increasing heat treating temperature can lead to an increase in crystalline size.The results indicated that the sample S.S(sample derived from sol containing sulfuric acid as catalyst) exhibits superhydrophilic nature and better photocatalytic activity,which can be attributed to its higher anatase content and lower crystalline size.Morphological studies,carried out using Atomic Force Microscopy(AFM),confirm the presence of crystalline phase with such a grain size and low surface roughness.Thus,the applied films exhibiting high photocatalytic activity,superhydrophilic behavior,and low surface roughness can be used as an efficient self-cleaning coating on glass and other optical applications.