A TEM study on the microstructure of spark plasma sintered ZrB_2-based composite with nano-sized SiC dopant

Sintering behavior of ZrB_2 ceramic with nano-sized SiC dopant was studied. ZrB_2-25 vol% nano-sized SiC was selected as the starting mixture to fabricate the composite. The manufacturing process was accomplished at 1800℃ for 5 min under 25 MPa via spark plasma sintering(SPS). The as-sintered sample reached a relative density of 99%. Besides the initial phases, namely ZrB_2 and SiC, the high-resolution X-ray diffraction(HRXRD) was used to study the formation of an in-situ ZrC phase. The possible chemical interactions during the ZrC phase formation were scrutinized. The microstructure of the composite was studied by the field emission scanning electron microscopy(FESEM) and transmission electron microscopy(TEM). Elemental analysis through FESEM evaluations revealed the formation of amorphous phases, rich in Zr, C, Si, B, and O elements, which was in harmony with the thermodynamical assessments. TEM studies endorsed the formation of such phases, containing a glassy bed of Si–B–O with ZrC and C islands dispersed therein.     

Stability Analysis and Performance Evaluation of Delayed Bilateral Telerobotic Systems over a Lossy Communication Channel

The focus of this paper is to address a novel control technique for stability and transparency analysis of bilateral telerobotic systems in the presence of data loss and time delay in the communication channel. Different control strategies have been reported to compensate the effects of time delay in the communication channel;however, most of them result in poor performance under data loss. First, a model for data loss is proposed using a finite series representation of a set of periodic continuous pulses.To improve the performance and data reconstruction, a holder circuits is also introduced. The passivity of the overall system is provided via the wave variable technique based on the proposed model for the data loss. The stability analysis of the system is then derived using the Lyapunov theorem under the time delay and the data loss. Finally, experimental results are given to illustrate the capability of the proposed control technique.     

Cell-free expression and in meso crystallisation of an integral membrane kinase for structure determination

Membrane proteins are key elements in cell physiology and drug targeting, but getting a high-resolution structure by crystallographic means is still enormously challenging. Novel strategies are in big demand to facilitate the structure determination process that will ultimately hasten the day when sequence information alone can provide a three-dimensional model. Cell-free or in vitro expression enables rapid access to large quantities of high-quality membrane proteins suitable for an array of applications. Despite its impressive efficiency, to date only two membrane proteins produced by the in vitro approach have yielded crystal structures. Here, we have analysed synergies of cell-free expression and crystallisation in lipid mesophases for generating an X-ray structure of the integral membrane enzyme diacylglycerol kinase to 2.28-Å resolution. The quality of cellular and cell-free-expressed kinase samples has been evaluated systematically by comparing (1) spectroscopic properties, (2) purity and oligomer formation, (3) lipid content and (4) functionality. DgkA is the first membrane enzyme crystallised based on cell-free expression. The study provides a basic standard for the crystallisation of cell-free-expressed membrane proteins and the methods detailed here should prove generally useful and contribute to accelerating the pace at which membrane protein structures are solved.     

The FHIT gene product: tumor suppressor and genome “caretaker”

The FHIT gene at FRA3B is one of the earliest and most frequently altered genes in the majority of human cancers. It was recently discovered that the FHIT gene is not the most fragile locus in epithelial cells, the cell of origin for most Fhit-negative cancers, eroding support for past claims that deletions at this locus are simply passenger events that are carried along in expanding cancer clones, due to extreme vulnerability to DNA damage rather than to loss of FHIT function. Indeed, recent reports have reconfirmed FHIT as a tumor suppressor gene with roles in apoptosis and prevention of the epithelial–mesenchymal transition. Other recent works have identified a novel role for the FHIT gene product, Fhit, as a genome “caretaker.” Loss of this caretaker function leads to nucleotide imbalance, spontaneous replication stress, and DNA breaks. Because Fhit loss-induced DNA damage is “checkpoint blind,” cells accumulate further DNA damage during subsequent cell cycles, accruing global genome instability that could facilitate oncogenic mutation acquisition and expedite clonal expansion. Loss of Fhit activity therefore induces a mutator phenotype. Evidence for FHIT as a mutator gene is discussed in light of these recent investigations of Fhit loss and subsequent genome instability.     

Sample average approximation method for a class of stochastic variational inequality problems

This paper considers a class of stochastic variational inequality problems. As proposed by Jiang and Xu (2008), by using the so-called regularized gap function, the authors formulate the problems as constrained optimization problems and then propose a sample average approximation method for solving the problems. Under some moderate conditions, the authors investigate the limiting behavior of the optimal values and the optimal solutions of the approximation problems. Finally, some numerical results are reported to show efficiency of the proposed method.     

Biogenic amino acid methionine-based corrosion inhibitors of mild steel in acidic media

N,N-Diallyl methionine ethyl ester hydrochloride 5 underwent alternating copolymerization with SO_2 via the Butler cyclopolymerization protocol in dimethyl sulfoxide(DMSO) to give water-soluble cycloterpolymer 6 with a ～1:1 molar ratio of sulfide and sulfoxide groups as a result of oxygen transfer from DMSO. Half of the sulfide groups in 6, upon oxidation with H_2O_2, afforded polymer sulfoxide 7 and polymer sulfone 8. The solution properties of these polymers were determined via a viscometric technique. The thermal stability of these polymers was determined by thermogravimetric analysis. The inhibition efficiency obtained from gravimetric mass loss, potentiodynamic polarization, and electrochemical impedance spectroscopy techniques agreed well with each other. The corrosion efficiencies increase with increasing concentration of the polymers. At a polymer concentration of 175 mM, the maximum inhibition efficiency of copolymer compounds 6–8 was determined to be 92%, 97%, and 95%, respectively. The synthesized polymer compounds acted as mixed-type inhibitors. Polymer compound 7 adsorbed onto the metal surface via chemisorption and physisorption and obeyed Langmuir, Temkin, and Freundlich adsorption isotherms. Analyses by X-ray photoelectron spectroscopy and scanning electron microscopy–energy-dispersive X-ray spectroscopy indicated that the adsorbed polymers formed a thin film on the metal surface and prevented further corrosive attack.     

半素环的一个交换性条件

本文推广了中国魏宗宣的结果:如果条件[x~my~n-xy~nx,x]=O或[x~sy~t-yx~sy,x]=O.成立,则半素环R是可交换的。其中m,n,s,t是正整数,任意x,y∈R.     

Improvement of microstructure and corrosion properties of friction stir welded AA5754 by adding Zn interlayer

This study investigated the effect of Zn foil layers on the microstructure and corrosion characteristics of friction stir welded aluminum alloy 5754. Samples of various joints were prepared by applying different rotational and welding speeds, and their microstructures were evaluated via a metallographic technique and scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy elemental analysis. The anticorrosion behavior of joints in the absence and presence of a Zn interlayer was studied by cyclic potentiodynamic polarization test in 3.5wt% NaCl aqueous solution, and sound welds were obtained in the presence of the Zn interlayer foil. The results revealed that the joint made at a rotational speed of 800 r/min and traveling speed of 15 mm/min achieved a chemical composition identical to that of aluminum alloy 7xxx series, and as such, it showed the best resistance to corrosion.     

Dynamic Analysis of Cable Roofs Under Transient Wind:A Comparison Between Time Domain and Frequency Domain Approaches

At present, high-speed computing capabilities and advanced nonlinear dynamic finite element procedures enable detailed dynamic analysis of cable structures. Although deterministic approaches require considerable analysis time and effort in relation to modeling, running, and data processing, they seem to be the only alternative to obtain high accuracy. Detailed dynamic analysis of cable roof networks is sophisticated and requires advanced modeling expertise. This paper presents a comparison between detailed nonlinear dynamic analysis and a simplified frequency domain approach to estimate the maximum probable response of weakly nonlinear cable roofs. The approach can be considered as alternative to detailed time-domain analysis in the preliminary design phase, or can be used to validate results obtained from more elaborated numerical models. The proposed method is illustrated with two examples of cable net roofs that were also analysed in the time domain.     

Effect of SrCO<Subscript>3</Subscript> addition on the dynamic compressive strength of ZTA

Ceramic parts usually experience dynamic load in armor applications. Therefore, studying the dynamic behaviors of ceramics is important. Limited data are available on the dynamic behaviors of ceramics; thus, it is helpful to predict the dynamic strength of ceramics on the basis of their mechanical properties. In this paper, the addition of SrCO₃ into zirconia-toughened alumina (ZTA) was demonstrated to improve the fracture toughness of ZTA due to the formation of the SrAl₁₂O₁₉ (SA6) phase. The porosity of ZTA was found to be increased by the addition of SrCO₃. These newly formed pores served as the nucleation sites of cracks under dynamic load; these cracks eventually coalesced to form damaged zones in the samples. Although the K IC values of the samples were improved, the dynamic strength was not enhanced because of the increase in porosity; in fact, the dynamic strength of ZTA ceramics decreased with the addition of SrCO₃.