Research on subsidence method aided by water injection and its engineering application for the north anchor of Taizhou Bridge

The north anchorage caisson of Taizhou Bridge encountered some difficulties during the sinking process for the large sidewall frictional resistances. To solve this problem, a new concept and method called subsidence method aided by water injection is proposed. Numeral analysis is adopted to simulate the effects of this method for the north anchor of Taizhou Bridge, which confirmed the feasibility and validity. Finally, the method is applied to the north anchor caisson during the caisson sinking procedure and helps the caisson sink and embed to the designed position smoothly.     

A DYNAMIC APPROACH TO CALCULATE SHADOW PRICES OF WATER RESOURCES FOR NINE MAJOR RIVERS IN CHINA

China is experienciug from serious water issues. There are many differences among the Nine Major Rivers basins of China in the construction of dikes, reservoirs, floodgates, flood discharge projects, flood diversion projects, water ecological constructions, water conservancy management, etc. The shadow prices of water resources for Nine Major Rivers can provide suggestions to the Chinese goverument. This article develops a dynamic shadow prices approach based on a multipeziod input-output optimizing model. Unlike previous approaches, the new model is based on the dynamic computable general equilibrium （DCGE） model to solve the problem of marginal long-term prices of water resources. First, definitions and algorithms of DCGE are elaborated. Second, the results of shadow prices of water resources for Nine Major Rivers in 1949-2050 in China using the National Water Conservancy input-holdiug-out in table for Nine Major Rivers in 1999 are listed. A conclusion of this article is that the shadow prices of water resources for Nine Major Rivers are largely based on the extent of scarcity. Selling prices of water resources should be revised via the usage of parameters representing shadow prices.     

Photosensitized splitting of cis-syn 1,3-dimethyluracil dimer by tryptophan and its peptides

Photosensitized splitting of cis-syn 1,3-dimethyluracil dimer by tryptophan (Trp) and its peptides (Trp-Tyr and Trp-Phe) is studied by fluorescence quenching experiments and irradiation experiments.It reveals that 1,3-dimethyluracil dimer is mainly split by e?-?aq resulting from two-photon ionization of Trp and its peptides under irradiation with light (λ>290 nm).Moreover,the excited singlet state of Trp and its peptides can transfer an electron to the dimer,which splits and gives two pyrimidines.In addition,because of its lower oxidative potential,the excited triplet state of Trp-Tyr can also split the dimer via transfering an electron to the dimer.     

A Modular Incremental Model for English Full Parsing

In this paper, we present a modular incremental statistical model for English full parsing.Unlike other full parsing approaches in which the analysis of the sentence is a uniform process,our model separates the full parsing into shallow parsing and sentence skeleton parsing. In shallow parsing, we finish POS tagging, Base NP identification, prepositional phrase attachment and sub-ordinate clause identification. In skeleton parsing, we use a layered feature-oriented statistical method. Modularity possesses the advantage of solving different problems in parsing with corre-sponding mechanisms. Feature-oriented rule is able to express the complex lingual phenomena at the key point if needed. Evaluated on Penn Treebank corpus, we obtained 89.2 % precision and 89.8% recall.     

Detecting myocardial ischemia with 2-D CVIB imaging method--an in vivo animal experiment study

A 2-D cyclic variation of integrated backscatter (CVIB) imaging method was established for detecting myocardial ischemia. To demonstrate the feasibility and validity of this method, animal experiments were conducted. Acute myocardial ischemia was induced by occluding left anterior descending coronary artery in 10 anesthetized open-chest dogs. While scanning the normal hearts and the ischemic hearts with a B scanner, digital radiofrequency data were acquired by a real-time acquisition system in synchronism. The offline analysis to the radio-frequency signal with the 2-D CVIB imaging method was performed to verify the consistency between the imaging result and the design of the experiment. In addition, 4 dogs in experiment were treated with the heart pacemaker in order to investigate the influence of changing in heart rate on the detection of ischemic myocardium with the proposed method. The experimental result showed that the 2-D CVIB imaging method succeeded in detecting the ischemic myocardium and is a new non-invasive way for the cardiologists to both quantitatively and visually evaluate the contractile performance of the myocardium.     

Kinetics and formation mechanisms of intragranular ferrite in V-N microalloyed 600 MPa high strength rebar steel

To systematically investigate the kinetics and formation mechanisms of intragranular ferrite (IGF), isothermal heat treatment in the temperature range of 450℃ to 600℃ with holding for 30 s to 300 s, analysis of the corresponding microstructures, and observation of the precipitated particles were conducted in V-N microalloyed 600 MPa high strength rebar steel. The potency of V(C,N) for IGF nucleation was also analyzed statistically. The results show that the dominant microstructure transforms from bainite (B) and acicular ferrite (AF) to grain boundary ferrite (GBF), intragranular polygonal ferrite (IPF), and pearlite (P) as the isothermal temperature increases from 450℃ to 600℃. When the holding time at 600℃ is extended from 30 s to 60 s, 120 s, and 300 s, the GBF content ranges from 6.0vol% to 6.5vol% and the IPF content increases from 0.5vol% to 2.8vol%, 13.1vol%, and 13.5vol%, respectively, because the ferrite transformation preferentially occurs at the grain boundaries and then occurs at the austenite grains. Notably, V(C,N) particles are the most effective nucleation site for the formation of IPF, accounting for 51% of the said formation.     

Effects of AlN on the densification and mechanical properties of pressureless-sintered SiC ceramics

In the present work, Si C ceramics was fabricated with Al N using B_4 C and C as sintering aids by a solid-state pressureless-sintered method. The effects of Al N contents on the densification, mechanical properties, phase compositions, and microstructure evolutions of as-obtained Si C ceramics were thoroughly investigated. Al N was found to promote further densification of the Si C ceramics due to its evaporation over 1800 °C,transportation, and solidification in the pores resulted from Si C grain coarsening. The highest relative density of 99.65% was achieved for Si C sample with 15.0 wt% Al N by the pressureless-sintered method at 2130 °C for 1 h in Ar atmosphere. Furthermore, the fracture mechanism for Si C ceramics containing Al N tended to transfer from single transgranular fracture mode to both transgranular fracture and intergranular fracture modes when the sample with 30.0 wt% Al N sintered at 1900 °C for 1 h in Ar. Also, Si C ceramics with 30.0 wt% Al N exhibited the highest fracture toughness of 5.23 MPa m~(1/2) when sintered at 1900 °C.     

统计不相关最佳鉴别矢量集的本质研究

Until recently the hydrogen molecule structural parameters are calculated with the methods of quantum mechanics. To achieve results close to experimental values, the wave function used is complicated and has no clear physical meaning. Because the distribution of the electron probability density is a statistical rule, the macro-time has actually been used in the concept on a electron cloud graph. Here are obtained three formulas with a classical mechanics method on the bond-length re , bond-energy De and force constant k of the ground state hydrogen molecule, which have a clear physical meaning but no artificial parameters, and compared with experimental values, the relative errors are respectively less than 1% , 2% and 4% .     

CONTINUATION METHOD OF NONLINEAR INTEGRAL EQUATIONS

ＣＯＮＴＩＮＵＡＴＩＯＮＭＥＴＨＯＤＯＦＮＯＮＬＩＮＥＡＲＩＮＴＥＧＲＡＬＥＱＵＡＴＩＯＮＳ￥ＹＡＮＧＦｅｎｇｈａｎｇ；ＳＵＮＪｉｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＭａｔｈｅｍａｔｉｃｓ，ＴｉａｎｊｉｎＵｎｉｖｅｒｓｉｔｙ，Ｔｉａｎｉｉｎ３０００７２，Ｃ...     

Reliability Analysis of Some Typical Repairable Systems with Arbitrary Repair-Time Distribution

In this paper, reliability of some typical non-Markov repairable systems, including series systems, m-out-of- n or majority vote systems, and n : m cross-strapping standby redundant systems with general repair-time distribution, are studied by applying the generalized Markov renewal process (GMRP). The stochastic behavior of the typical systems is analyzed here. Formulas for mean time to first system failure, MTBF, MTTR, and availability are then developed.