凹坑板式空气预热器的传热特性及多目标优化

以全焊接型凹坑板式空气预热器为对象,基于最优设计试验方案,运用Workbench Fluent软件数值模拟凹坑板片特征结构参数对传热流阻性能的影响。基于参数敏感度分析,得到单因素作用下对传热流阻性能的影响程度为凹坑的纵向间距>长轴>横向间距>深度。基于响应曲面法分析,得到多因素协同作用时,凹坑之间的结构参数横纵距对性能影响比凹坑自身的结构参数深径比大。基于遗传算法以摩擦因子f最小、努塞尔数Nu与综合换热因子J_F最大为优化目标,得到给定范围内的3组较优结构组合。     

IRS辅助的MISO-SWIPT安全速率最大化算法

为增强系统的稳定性,基于智能反射面（intelligent reflection surface,IRS）辅助安全通信,为用户采用功率分配架构的无线携能传输（simultaneous wireless information and power transfer,SWIPT）技术以提高用户安全速率并降低用户的能量消耗,建立了系统安全速率最大化的目标函数模型;考虑IRS相移约束、基站最大发射功率、功率分配比率约束和用户最低能量采集约束,提出了一种基于交替优化的安全速率最大化算法。利用连续凸近似算法,将目标函数转化为凸的形式;采用交替优化,对耦合变量进行解耦处理;提出一种波束赋形算法以实现安全速率最大化。仿真表明,提出的算法能够有效提升IRS辅助的SWIPT系统的安全速率,至少比其他算法提高了2.63bps/Hz。     

溶剂萃取柠檬酸的传质研究

研究了用三辛胺溶剂分别从纯溶液和发酵液中萃取柠檬酸过程的传质规律与液滴粒径,无因次柱高及有机相配比对传质系数的影响,建立了液滴自由上升阶段的传质模型,并用以关联实验结果。     

2-(1-萘甲基)-3(2-四氢呋喃基)丙酸N,N-二乙氨基乙酯草酸盐的新法合成

改进２－（１－萘甲基）－３－（２－四氢呋喃基）丙酸Ｎ,Ｎ－二乙氨基乙酯草酸盐（Ⅵ）合成方法．方法在１－氯甲基萘和四氢糠基丙二酸二乙酯（Ⅰ）的烷基化反应中使用ＮａＨ／ＤＭＦ为催化剂;在２－（１－萘甲基）－３－（２－四氢呋喃基）丙酸（Ⅳ）与２－氯乙基－Ｎ,Ｎ－二乙基胺的酯化反应中加入相转移催化剂;在２－（１－萘甲基）－３－（２－四氢呋基）丙酸Ｎ,Ｎ二乙氨基乙酯（Ⅴ）与草酸成盐中,直接使用二水合草酸替代脱水草酸．结果烷基化反应产率提高到７５％,反应时间缩短到２ｈ;酯化反应产率从文献报道的７２％提高到９２％;二水合草酸成盐效果与脱水草酸相同．结论该方法较已有的合成方法产率有较大提高且操作简便,有较好的工业化前景．     

静电像管均方根半径的计算及像质评价

探讨在电子光学成像系统中像评定的一种途径。方法,从静电这像差均方根理论出发,追迹计算大量空间轨迹的落点及系统均根半径,并由此衍算成弦财制传递函数。     

谐振腔镜对高斯光束远场发散角的影响

利用变换矩阵和ＡＢＣＤ定律讨论了激光谐振空对高我束的变换,推导出高斯光束参数通过光腔输出镜的变换公式。并对热透镜腔,光束远场发散角等问题进行了讨论。     

The v-v energy transfer of highly vibrationally excited states (I)

The relaxation of the highly vibrationally excited CO (v = 1–8) by CO₂ is studied by timeresolved Fourier transform infrared emission spectroscopy (TR FTIR). 193 nm laser photolysis of the mixture of CHBr₃ with O₂ generates the highly vibrationally excited CO(v) molecules. TR FTIR records the intense infrared emission of CO(v→v-1). The vibrational populations of each level of CO(v) have been determined by the method of spectral simulation. Based on the evolution of the time resolved populations and the differential method, 8 energy transfer rate constants of CO(v = 1–8) to CO₂ molecules areobtained: (5.7±0.1), (5.9±0.1), (5.2±0.2), (3.4±0.2), (2.4±0.3), (2.2±0.4), (2.0±0.4) and (1.8±0.6) (10¹⁴ cm³ · molecule⁻¹ · s⁻¹), respectively. A two-channel energy transfer model can explain the feature of the quenching of CO(v) by CO². For the lower vibrational states of CO, the vibrational energy transfers preferentially to the u³ mode of CO² For the higher levels, the major quenching channel changes to the vibrational energy exchange between CO(v→v-1) and the u¹ mode of CO².     

The v-v energy transfer of highly vibrationally excited states (II)

The vibrational energy transfer from highly vibrationally excited CO to H₂O molecules is studied by time-resolved Fourier transform infrared emission spectroscopy (TR FTIR). Following the 193 nm laser photolysis of CHBr₃ and O₂ the secondary reactions generate CO(v). The infrared emission of CO(v → v−1) is detected by TR FTIR. The excitation of H₂O molecules is not observed. By the method of the spectral simulation and the differential technique, 8 rate constants for CO(v)/H₂O system are obtained: (1.7 ±0.1), (3.4 ±0.2), (6.2 ±0.4), (8.0 ±1.0), (9.0 ±2.0), (12 ±3), (16 ±4) and (18 ±7) (10¹³cm³ · molecule^-1· s^-1). At least two reasons lead to the efficient energy transfer. One is the contributions of the rotational energy to the vibational energy defect and the other is the result of the complex collision. With the SSH andab initio calculations, the quenching mechanism of CO(v) by H₂O is suggested.     

Effect of lanthanum ions on tRNAphe structure: Imino proton NMR spectroscopy

The effect of lanthanum ions on the structural and conformational change of yeast tRNA Phe was studied by 1H NMR. The results suggest that the tertiary base pair (G-15)(C-48), which was located in the terminal in the augmented dihydrouridine helix (D-helix), was markedly affected by adding La 3+ and shifted 0.33 downfield. Based pair (U-8)(A-14), which is associated with a tertiary interaction, links the base of the acceptor stem to the D-stem and anchors the elbow of the L structure, shifted 0.20 upfield. Another imino proton that may be affected by La 3+ in tRNA Phe is the tertiary base pair (G-19)(C-56). The assignment of this resonance is tentative since it is located in the region of highly overlapping resonances between 12.6 and 12.2. This base pair helps to anchor the D-loop to the TΨC loop.     

板式换热器中蒸汽凝结换热特性

在板式换热器的蒸汽凝结换热试验台上进行了实验研究,获取蒸汽完全凝结和部分凝结两种典型工况下的换热和压降特性．且就板式换热器中蒸汽凝结过程的换热进行分析和处理,得到了一个在板片槽道中蒸汽凝结换热系数关联式．并推荐用于板式换热器的蒸汽凝结换热系数的计算．