基于J2EE的OEM节点锁的设计和实现

本文首先介绍了OEM软件产品中节点锁的概念和目前中间件技术J2EE的发展概况，然后阐述了OEM节点锁的体系结构，并着重分析了基于J2EE的OEM产品节点锁的设计原理和Java多线程技术，最后给出了应用实例以表明其有效性。     

基于J2EE体系结构实现网上购物系统

J2 EE体系结构采用组件的思想 ,将业务逻辑层从客户、服务器端独立出来 ,从而带来开发、使用和维护的便利 .在分析的基础上 ,给出了一个网上购物系统的设计模型和实现方法 .     

宜宾热源公司热电厂锅炉补给水处理工艺改造

分析了宜宾热源公司热电厂锅炉给水处理工艺的问题，指出因为原采用二级钠离子软化工艺水质不达标，造成频繁爆管，严重影响生产的不良后果．介绍了技术改造措施及效果：在原工艺基础上引入复床，将给水硬度控制在2．0μmol／L以下，碱度、氯根及电导率电得到控制，系统运行将近一年，水质稳定，锅炉运行正常安全，不仅消除了以前的生产隐患，而且节约了大量运行成本．     

分子筛负载HPA/TiO2催化剂的性能

报道了分子筛负载杂多酸和二氧化钛催化剂MS／HPA／TiO2的制备及其对品红溶液降解的效果，系统研究了催化品红溶液降解的优化条件。实验表明，MS／HPA／TiO2具有良好的催化活性且容易回收。当MS：HPA：TiO2=1：10：1，品红的浓度为0．005％（10mL），催化剂的用量为10mg，反应时间为10min，品红的降解率达到96．87％。     

Liquid-Liquid Equilibrium for 1-Butanol-Water-KF and 1-Butanol-Water-K2CO3 Systems

KF or K2CO3 was added into the 1-butanol-water system and two phases were formed： water-rich phase （water phase） and 1-butanol-rich phase （1-butanol phase）. The liquid liquid equilibrium （LLE） data for 1-butanol-water-KF and 1-butanol-water-K2CO3 systems were measured at 25℃ and showed that 1-butanol phase contained negligible salt and water phase contained negligible 1-butanol when the concentrations of KF and K2CO3 in the water phase were equal to or higher than 27.11% and 31.68% , respectively. Thus water could be separated efficiently from 1-butanol-water by adding KF or K2CO3 into the system. A theoretical calculation of LLE data was calculated by using the Pitzer theory to get water activity in the water phase, and by the models, such as the Wilson, NRTL or the UNIQUAC for the 1-butanol phase. For 1-hutanol-water-KF system, the experimental data were found in good agreement with the calculated results by using Pitzer theory and Wilson equa tion, while for 1-butanol-water-K2CO3 system, the experimental data were found in good agreement with the calculated results by using Pitzer theory and UNIQUAC eauation.     

一个七号信令鉴权系统的设计与实现

七号信令鉴权系统是针对于通信用户在不同的通信网间的使用权限的鉴别系统.本方案所设计的鉴权系统是依照有关通信行业技术标准而制定的,它能够充分地体现现代通信领域的发展趋势,同时也为广大的通信用户提供了必要的网间通信的鉴权手段.     

Expression and Characterization of HGV E2 cDNA in Pichia pastoris

A 559 base pair fragment of cDNA locating at the putative E2 region of GBV-C/HGV was in-serted into Pichia pastoris expression vector pPICgK in the reading frame of α-factor secreting signal pep-tide. The recombinant expression plasmid pPIC9K-E2 was introduced into P. pastoris GSll5 with electro-poration and recombined with the host genome by homological recombination. The His+Mut+ recombinantyeasts were selected and cultivated in the BMMY medium. After 3 days induction with 0. 5% methanol,the target protein(E2) accumulated up to 30% of total proteins in the supernatant. The expressed E2 pro-tein was proved possessing antigenicity and high specificity with Western blot and ELISA probed with serafrom the immunized rabbits and the patients infected by GBV-C/HGV.     

纤维双相钢的组织形成及对性能的影响

研究了纤维双相15Mn2Nb钢组织的形成及对性能的影响.结果表明,纤维双相钢具有优异的强塑性匹配,是一种天然的复合材料.其纤维组织的获取主要取决于合金化和热处理工艺规程,而合金元素Nb阻碍铁素体再结晶是形成纤维组织的关键.     

电化学沉积Cu-In-Se薄膜

采用电化学沉积方法在钼箔上制备Cu-Se、In-Se和Cu-In-Se薄膜,对电沉积的工艺参数进行了测试,发现Cu-In-Se是一种诱导共沉积,虽然沉积膜不具备化学计量比,但具有一定的光电性能.     

纳米二氧化锆制备工艺的研究

实验用氨水作沉淀剂,与氯氧化锆在常温条件下进行液相沉淀反应,制备纳米二氧化锆.实验优化出制备纳米二氧化锆的最佳工艺条件:反应物氨水和氯氧化锆的摩尔比为2:1;分散剂浓度为2g/L;焙烧温度为750℃;氨水浓度0.2mol/L;氯氧化锆浓度0.1mol/L,在此条件下可获得较为分散均匀的纳米二氧化锆.