蕴涵环交换性的某些多项恒等式

设ｍ＞１，ｎ，ｐ，ｑ，ｒ，ｓ均为正整数，Ｒ是一个具有单位元１的环．证明了：如果Ｒ中的任意ｘ，ｙ满足且Ｒ具有Ｑ（ｍ）性质，则Ｒ是一个交换环．此外，在适当的条件下确立了Ｒ的交换性．     

不同体外培养条件对牛体外受精胚胎质量影响的研究

研究探讨了不同体外培养条件下牛体外受精胚胎的发育速度及囊胚细胞数，从而了解不同体外培养系统对牛体外受精胚胎质量的影响，实验一中伴体外受精卵分别在ＳＯＦ＋牛输卵管上皮细胞（ＢＯＥＣ）和ＴＣＭ１９９＋ＢＯＥＣ两种培养系统内培养，在这两种培养条件下囊胚发育率分别为２２．２％和２１．２％，囊胚细胞数分别为１１３．３±５．０和９７．９±８．３，受精后第６～９ｄ的囊胚出现率分别为４０．１％，３７．０％，１９．     

胶束溶液中丙烯酰胺聚合反应的研究

应用模拟热谱曲线法，在３０℃与４０℃下水溶液，单一及混合胶束溶液中丙烯酰胺聚合反应的研究了用ＮａＳＯ３－Ｋ２Ｓ２Ｏ８氧还原体系引发的丙烯酰胺聚合反应。讨论了表面活性剂量及单一及复配混合胶束对丙烯酰胺聚合反应速率常数和聚丙烯酰胺分子量的影响。     

Growth ages of ferromanganese crusts from the western and central Pacific： Comparison between nannofossil analysis and ^10Be dating

Based on results of nannofossil analysis and 10Be dating in ferromanganese crusts M1-1 and A1-1 (no nannofossils were found in it),from the western and central Pacific respectively,it is found that the crust growth ages from nannofossil biostrati-graphy agree well with those based on 10Be isotope analysis. Both crusts have three growth layers,and the oldest layer was deposited in Miocene at about 12.80 Ma. The maximum,minimum,and average growth rates of crust A1-1 (from the central Pacific) are 8.11,1.92 and 3.47 mm/Ma,and those of crust M1-1 (from the western Pacific) are 2.93,0.47,and 0.94 mm/Ma.     

散射和结构——量子物理学中的要点和相似性

著名物理学家卢瑟福有一句名言：“如果你不能用简单的、非技术的术语解释一个结果，你就没有真正弄懂它”。作者们认为这样一句名言最恰当地表达了他们撰写本书的目的。     

SoC处理器的时钟生成器：电路和体系结构

本书涵盖了面向SoC（System　on　Chip，片上系统）处理器的集成综合器电路设计的论题，采取了一种更为全局的设计观念来考察电路级和体系结构级的设计空间。书中的论述十分广泛，而且包括电路理论和锁相环反馈控制理论的综述。在电路级方面，讨论包括深亚微米数字CMOS过程的低功耗模拟设计、供电噪声效应、设备噪声；在体系结构级方面的论述，涵盖了连续时间和离散时间模型的锁相环分析，以及锁相行为的细节分析。还有一些章节对特定的时钟生成器模块做了电路级和系统结构级的深入描述，其中包括高供电噪声屏蔽的锁相环电路、体系结构和数字锁相环体系结构，考察了为离散时间模拟部件产生低失真采样时钟的方法。这里所说的锁相环包括希格马．代尔塔N分锁相环、直接数字综合（DDS、Direct　Digital　Synthesis）技术和锁相环的非常规应用。本书讨论的面向测试的设计（Dvr、Design　for　Test），其中包括锁相环的精确测量滤波器方法和嵌人式测试（BIST、Built—in—self-test）技术。     

MERGING OPTIMALITY CONDITIONS WITH GENETIC ALGORITHM OPERATORS TO SOLVE SINGLE MACHINE TOTAL WEIGHTED TARDINESS PROBLEM

1.Introduction Production sequencing and scheduling is one of the most important activities in production planning and control.Sequencing is defined as the order in which the jobs are processed through the machines.The allocation of machines over time to process a collection of jobs is defined as Scheduling.Several methods have been developed to solve the scheduling problem which can be classified as follows:1)efficient optimal methods,2)implicit and explicit,or complete enumerative methods,a…     

不同降水强度4种草地群落土壤呼吸通量变化特征

利用静态暗箱法, 对内蒙古锡林河流域沿降水梯度4种半干旱草地类型进行了连续2年的野外定位试验, 对比研究了沿降水梯度4种不同草地类型土壤呼吸通量的变化特征, 统计分析了水热因子对草地土壤呼吸通量特征的可能影响, 并建立了土壤呼吸通量与水热因子间的数值关系模式, 同时利用野外连续完整的观测数据对不同草地类型土壤CO₂年排放量分别进行了估算. 结果表明: 土壤呼吸通量存在明显的季节变化规律, 沿降水梯度各草地类型土壤呼吸通量的季节变化型式基本相同, 各草地群落土壤呼吸均以春末和夏季较高, 秋冬季排放量较低, 不同草地类型冬季均观测到土壤呼吸的负通量, 对其机制的进一步研究有利于对土壤年呼吸总量的准确估算; 沿降水梯度4种草地类型土壤年(或生长季)呼吸量均沿降水梯度递减, 表现为贝加尔针茅草原>羊草草原>大针茅草原>克氏针茅草原; 不同草地类型土壤呼吸通量在植物生长季与0~10 cm以及10~20 cm土壤含水量均呈不同程度的正相关, 而与气温和表层土壤温度的相关性较弱, 4种草地类型生长季内土壤表层含水量的变化通常能解释土壤呼吸通量变异的70.2%~94.7%, 而在植物非生长季, 土壤呼吸通量更多地受气温及土壤表层地温的限制, 温度条件的变化能解释土壤呼吸通量变化的70%以上.     

Effect of cold rolling process on microstructure and mechanical properties of high strength β titanium alloy thin sheets

The microstructure and mechanical properties of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe high strength titanium alloy sheets prepared by unidirectional cold rolling and two-step cross cold rolling were investigated. Results showed that the β phase grains were refined significantly by cold rolling followed by solution treatment for a short time.Compared to unidirectional cold rolling, the short time solution treatment after two-step cross rolling could significantly reduce the non-uniformity of the microstructure of the alloy sheets. After aging treatment at 550 ℃,the anisotropy of the mechanical properties still existed in the unidirectional rolled sheets, and the tensile strength was highest along the rolling direction. After solution and aging treatment, the anisotropy of the mechanical properties of the two-step cross rolling process sheet was not obvious than unidirectional cold rolling,and alloy had good strength and plasticity matching.     

Enhanced performance of nano-sized SiC reinforced Al metal matrix nanocomposites synthesized through microwave sintering and hot extrusion techniques

In the present study, nano-sized SiC (0, 0.3, 0.5, 1.0 and 1.5 vol%) reinforced aluminum (Al) metal matrix composites were fabricated by microwave sintering and hot extrusion techniques. The structural (XRD, SEM), mechanical (nanoindentation, compression, tensile) and thermal properties (co-efficient of thermal expansion- CTE) of the developed Al-SiC nanocomposites were studied. The SEM/EDS mapping images show a homogeneous distribution of SiC nanoparticles into the Al matrix. A significant increase in the strength (compressive and tensile) of the Al-SiC nanocomposites with the addition of SiC content is observed. However, it is noticed that the ductility of Al-SiC nanocomposites decreases with increasing volume fraction of SiC. The thermal analysis indicates that CTE of Al-SiC nanocomposites decreases with the progressive addition of hard SiC nanoparticles. Overall, hot extruded Al 1.5 vol% SiC nanocomposites exhibited the best mechanical and thermal performance as compared to the other developed Al-SiC nanocomposites.