Computer simulation for the precipitation process of Ni75Al7.5V17.5 alloy

The precipitation mechanism of Ni75Al7.5V17.5 alloy above the L12 instability line, between the L12 and D022 instability lines and below the D022 instability line are studied using microscopic phase-field kinetic equation. This paper is aimed at investigating the effect of temperature on precipitation mechanism and morphological evolution of the alloy. Our simulations demonstrate that the precipitation is a mixed mechanism of non-classical nucleation growth and spinodal decomposition above the L12 instability line. It needs certain thermal fluctuations for nucleation and the number of θ phases is small at this temperature. The precipitation mechanism of γ'phase is congruent ordering followed by spinodal decomposition, and θ phase is a mixed mechanism of non-classical nucleation growth and spinodal decomposition between the L12 and D022 instability lines. The mechanism below the D022 instability line is similar to that between the L12 and D022 instability lines. With the decrease of the temperature, ordering and phase separation becomes fast, the dimension of γ'phase becomes small, the shape transforms from equiaxed to block, the dimension of θ phase becomes large and the shape transforms from strip to circle.     

基于差异化策略的环境管理与企业竞争力研究

从产品差异化角度建立寡头竞争模型,针对当提高产品环境质量成本递增,消费者对产品环境影响具有不同偏好情况下,清洁产品和污染产品生产厂商的收益进行分析.结果表明,政府不对产品环境影响进行管制以及对污染产品进行收费时,清洁产品生产厂商都可以获得较高的利润,并且政府环境法规越严格,清洁产品生产厂商利润越高.这表明,从差异化策略角度实行环境管理可以提高企业竞争力.     

Development of the CAS-IBB single-particle microbeam for localized irradiation of living cells

A single-particle microbeam facility has been constructed at the Key Laboratory of Ion Beam Bioengineering (LIBB), Chinese Academy of Sciences (CAS). The system was designed to deliver a defined numbers of hydrogen ions, produced by a van de Graaff accelerator, in an energy range of 2.0-3.0 MeV, into an area smaller than that of the nucleus of an individual living cell. The beam is collimated by a borosilicate glass capillary that forms the beam-line exit. An integrated computer program recognizes the cells and locates them one by one over the microbeam exit for irradiation. We present technical details of the CAS-LIBB microbeam facility, particularly on the collimator, hardware, control program, as well as cell irradiation protocols available. Various factors contributing to the targeting and positioning precision are discussed along with accuracy measurement results.     

对实现凉山改革新突破的思考

改革是发展的动力。要实现发展的目标,改革必须要有新突破。凉山改革的新突破应从五个方面着手:一是要准确把握改革大势;二是要清醒认识凉山改革面临的困难和问题,找准症结,提出对策;三是要在找准症结的基础上勇于攻坚破难,围绕改革中的难点、重点进行攻坚;四是要沿着市场化方向不断深化改革、清除障碍、完善措施,为凉山跨越式发展提供强大的动力;五是要加强领导,周密部署,精心组织实施各项改革措施。     

Control and Stabilization of the Rosenau Equation Posed on a Periodic Domain

This paper considers the Rosenau equation with a moving control?t u + ?_t?_x~4 u + ?_xu + u?x u = a(x + ct)h(x, t), c = 0, x ∈ T = R/(2πZ), t 0.The authors prove that the Rosenau equation with a moving control is locally exact controllable in Hs(T) with s ≥ 0 and globally exponential stable in H~s(T) with s ≥ 2. The two results nontrivially extend the work of(Rosier L and Zhang B Y, 2013) from the BBM equation to the Rosenau equation.     

基于三维激光技术的路面坑槽多维度指标检测

为实现沥青路面坑槽深度、面积和体积等多维度指标的自动、准确检测,利用三维激光技术对室内坑槽模型进行扫描,基于Matlab软件对激光点云数据采用不规则三角网(TIN)平面插值法重构了坑槽三维模型,进而结合等高线提取确定了坑槽边界,实现了坑槽多维度指标自动计算;对比了不同坑槽多维度指标计算误差,研究了激光线纵向间距对计算误差影响规律.研究结果表明:坑槽深度、面积和体积指标的最大相对误差分别为3.96%、4.58%和4.74%;当激光线纵向间距从1mm逐渐增大至20mm时,坑槽多维度指标计算相对误差逐渐增加;当间距为5mm时,坑槽深度、面积和体积指标的最大相对误差分别为4.65%、6.32%和7.17%;当间距大于5mm后,坑槽三维重构模型逐渐失真并出现了部分缺失,从而导致多维度指标检测误差的增大;因此,为保证坑槽多维度指标检测准确度建议激光线纵向间距应不大于5mm;坑槽多维度指标准确获取将为路面破损层位判定、严重程度评价和修补材料估算提供依据.     

青楷槭不定根形成的解剖学研究

以青楷槭2 a生插条为材料,采用石蜡切片法对其不定根形成过程进行解剖学观察.结果表明:青楷槭茎的结构由表皮、皮层和次生维管组织组成;不定根生成方式属于诱导型,维管形成层和皮层的愈伤组织形成根原基;插条基部皮层的愈伤组织数量多,分布均匀,可形成不定根;切口部位愈伤组织不分化形成不定根.     

盐岩储库腔底堆积物空隙体积试验与计算

受建库盐层本身地质特点影响,造腔结束后,底部一般会堆积大量不溶物。堆积物的存在既浪费了有效库容体积,又为整体建库施工带来了诸多不利因素。为科学评价该堆积物并进行有效处理或转变利用以增大库容体积,对其分布特征及堆积空隙体积进行了研究。通过室内溶腔实验获取了堆积不溶物样品,采用筛分法实验测定了其颗粒分布,并根据分形分布理论对其粒度分布特征进行了分析,进而基于可压缩堆积模型对堆积空隙体积进行了数值及模型研究。应用实例进行计算并与现场数据进行了对比评价验证,结果表明,在双对数坐标系下,腔底堆积物颗粒尺寸与累积数量呈线性相关,即其粒度分布可用分形分布函数进行表征,且分形维数作为分布特征参量能较好地描述颗粒均匀程度与集中性。     

微纳马达在生物医疗领域中的应用

 作为微纳尺度的动力装置,微纳马达具有体积小、质量轻和驱动力大等优点,在传感检测、微纳加工和环境治理等方面表现出突出的优势,特别是在生物医疗领域具有巨大应用前景。本文阐述了生物医用微纳马达的制备及驱动控制方法,总结了微纳马达在药物靶向运输、细胞识别捕捉、纳米手术、吸附毒素及溶解血栓等生物医疗领域中的应用,并讨论了其在生物医疗领域面临的挑战和未来的发展方向。     

钴掺杂对二氧化钛晶粒尺寸及相变的影响

通过溶胶凝胶法制备了纯Ti O_2与不同Co浓度掺杂的Ti O_2纳米粉体,并对样品进行了450、550、650℃保温2 h的热处理.采用X射线衍射仪对制得的纳米粉体进行了晶体结构表征,研究了热处理温度以及Co掺杂浓度对Ti O_2晶粒尺寸以及锐钛矿金红石相变的影响.结果表明:纯Ti O_2与Co-Ti O_2在450℃时为单一的锐钛矿;550℃时,纯Ti O_2有微量金红石生成,Co-Ti O_2仍然全部为锐钛矿;650℃时纯Ti O_2大部分转变为金红石,当Co掺杂量较低时,Co能促进锐钛矿相向金红石相的转变,而当掺杂浓度为8%时,Co抑制锐钛矿相向金红石相的转变;热处理温度升高以及Co掺杂浓度增加有利于Co Ti O_3相的生成,相同温度下,Co掺杂后Ti O_2晶粒尺寸减小.