Fabrication Research and Property of Enhanced Petaling Cold Cathode with Carbon Nanotube

With high effective screen-printing technique, a new triode field emission display (FED)with enhanced petaling cold cathode was fabricated. For enhancing the field emission performance,a series of improved measures was adopted in the fabrication course. Seen from the fabrication structure of enhanced petaling cold cathode,the bar conducting electrode and the petaling bottom electrode were fabricated with the sintered silver slurry on cathode glass faceplate. The luminescence image with green phosphor was displayed for the sealed enhanced petaling cold cathode FED. The measured results showed that the enhanced petaling cold cathode had good field emission performance. The enhanced petaling cold cathode FED possessed low turn-on electric-field of 1. 95 V /μm,large emission current of 1 389. 6 μA,and high luminance brightness of 1 520 cd /m2 .     

PCI Express多链路的De-Skew逻辑设计

对于PCI Express(PCIE)多链路通道来说,发送端使用相同的时钟源同时发送数据时,通常会出现相位偏移(skew)的问题.解决链路中的相位偏移问题,能够保证所有链路中的接收端同时接收并正确处理接收到的数据,这在高速多链路串行电路中尤为重要.我们提出了一种De-skew逻辑电路,并说明了如何利用计数器来计算skew的大小、如何利用选择器控制数据是否经过缓存器,以及所组成的逻辑电路是如何消除链路中的skew;该逻辑设计已通过RTL级仿真和FPGA验证,仿真与验证的结果与预期结果完全符合,充分表明该逻辑设计能够完全解决链路的skew现象.与国外解决skew的方案对比表明,所设计的辑电路具有全面性,优越性和实用性.     

Low Cost Fabrication of Parallel Grid Electrode Group for Carbon Nanotube Field Emission Display

Based on simple screen printing technique,the parallel grid electrode group was developed. One grid electrode included the left and the right branch electrodes,which were formed with the solidified silver slurry on grid substrate. Under one anode pixel,the left and the right branch electrodes would control respectively the electron emission of two independent carbon nanotube （CNT） field emitters on the same cathode electrode. With the parallel grid electrode group, the capacitance effect between grid-cathode electrodes would be reduced due to the decreased grid electrode fabrication area. And the service life of field emission display （FED） could be prolonged owing to the existence of spare branch electrode. Using CNT as field emitter,the FED with parallel grid electrode group was fabricated,which possessed better grid control performance, high luminescence image brightness, and low fabrication cost. The turn-on electric-field was 2. 13 V /mm and the maximum field emission current had reached 1 506. 2 mA.     

可转位盘形齿轮铣刀耐用度的计算与优化

通过理论计算方法,采用长度和时间2个标准,推导出可转位盘形齿轮铣刀的工时函数与成本函数,分析了刀具使用耐用度和名义耐用度的区别与联系,获得了实现最高生产率和最低成本的耐用度计算方法.采用统计手段对某铣削装备加工42CrMo齿圈的耐用度进行分析,拟合换刀策略和进给速度对耐用度的影响函数模型,获得刀具耐用度常数.基于该方法,可对加工方案进行初步评估,确定刀具的最佳耐用度方案.     

半导体发光二极管的研究与分析

在简介半导体发光二极管的辐射复合基础上，。详细讨论了包括Ⅲ-Ⅳ，Ⅱ-Ⅵ族化合物半导体材料和多孔硅（PS）等新发光材料在内的各种发光材料的发光机理，发光二极管的结构与特性，并介绍了半导体发光二极管在近代科学中的应用。     

门极换向晶闸管阳极透过率的优化设计

采用数值模拟方法研究了缓冲层和透明阳极的结构参数对阳极透过率的影响.结果表明:透明阳极在较小的电流密度情况下具有较低的透过率,随着电流密度的增大透过率显著提高,即透明阳极的透过率依赖于阳极的电流密度;降低透明发射极或提高缓冲层掺杂水平,透过率也会提高;减小阳极的结深,透过率也会提高.因此,可以通过恰当地选择缓冲层和透明阳极的结构参数来调整阳极透过率,使之达到期望值,进而提高器件的关断性能.     

集成门极换流晶闸管驱动电路的研究

根据集成门极换流晶闸管驱动电路基本逻辑功能的要求，提出应用电子设计自动化技术和复杂可编程逻辑器件芯片实现高可靠性、单片化、灵活设计的方案，设计出一种采用了硬驱动和集成门极技术的集成门极换流晶闸管门极驱动电路．该电路具有结构简单，开关速度快，可靠性高，增加保护电路和测试电路方便等优点．电路仿真结果表明，开通时门极电流可在2μs内迅速达到200A左右，关断时电流门极电流可在4μs内抽取400A左右，符合集成门极换流晶闸管开通和关断时的特性要求．     

碳纳米管阴极场致发射的电场数值模拟

利用Visual FORTRAN语言，对碳纳米管阴极的外电势分布和电场强度分布进行了数值模拟．采用非等间距的网格划分对碳纳米管尖端附近进行细致的划分处理，并利用等参有限元方法进行了模拟计算．分析了碳纳米管尖端局部电场强度的增强效应和相邻碳纳米管之间的电场屏蔽现象．讨论了碳纳米管电场强度随管间距变化的关系以及碳纳米管尖端电场强度随半径变化的关系。