时滞分布参数系统变结构控制器的设计

研究了一类多时滞抛物型分布参数系统的变结构控制问题．通过非奇线性变换建立了系统的滑动模运动方程，设计了系统的无记忆功能的变结构控制器，给出了运动轨线到达滑动模态区的时间的估计．     

热通道玻璃幕墙的热工计算

简述了热通道的节能原理，推导出了热通道玻璃幕墙的热工计算模型，确定了模型中各方程的系数，介绍了计算及测量结果。该模型可用来计算内外侧玻璃的壁面温度、热通道内空气的温度和流速，以及室内的得热速率等，为相关工程计算提供参考。     

H_0~1[a,b]中的最佳数值积分公式

本文利用H10[a，b]中样条插值算子理论，讨论了H10[a，b]中的最佳逼近泛函，并给出最佳数值积分公式。     

块三对角矩阵方程的追赶法及其应用

导出了块三对角矩阵方程追赶法的一套递推关系式，并编制出相应的计算机Ｃｏｄｅ。该Ｃｏｄｅ具有良好的实用价值，可供在实际问题中使用。     

结构系统疲劳可靠性分析方法及其应用

研究了结构系统疲劳可靠性分析方法，建立了结构系统疲劳可靠性分析模型，提出了求取结构系统疲劳主要失效模式的方法，最后，以一海上平台为工程实际算例验证了文中算法的可行性及有效性。     

联合循环蒸气系统局部变动的定量分析研究

对联合循环的蒸气系统进行了热力分析和推导，提出了作功系数的概念，进而建立起联合循环蒸气系统局部定量的新方法，并用它对实际蒸气系统的偏差因素进行了定量分析．研究结果为联合循环蒸气系统的设计提供了分析方法和理论依据     

带堆焊层钢管焊接接头耐蚀性的电化学评定

采用电化学测试技术评价了低碳钢管管端内壁不锈钢焊条堆焊后再用相同焊条进行打底焊所得焊接接头（特别是焊接热影响区）的耐蚀性，选用两种高合金焊条M2、M6，并对堆焊金属进行热模拟试验，测定了模拟热影响区不同部位在3％NaCl介质中的阳极极化行为．结果表明，按新工艺焊接的接头代替普通碳钢焊接接头可有效地提高管道接头的使用寿命．两种焊条中，含Nb的M2耐蚀性比M6好，铌能够有效提高接头的耐均匀腐蚀、晶间腐蚀和点蚀能力，热影响区600～1000℃是高合金接头耐蚀性最薄弱的区域，建议采用超低碳含铌高合金焊条，以解决热影响区的腐蚀问题．     

吐哈盆地三叠纪孢粉地层学及古气候特征

吐哈盆地三叠系划分为韭菜园组、烧房沟组、克拉玛依组和黄山街组，通过对三叠纪地层的孢粉分析，建立了该盆地的四个孢粉组合带，Limatulasporites—Tae－niaesporites—Alisporites组合带、Aratrisporites—Punctatisporties组合带、Punc－tatisporites—Calamospora组合带和Cycadopites—Lophotriletes—Protoconiferus组合带。依据孢粉的演化得出吐哈盆地三叠纪的古气候为早期的干旱温暖到晚期的潮湿炎热。     

The strong cooperativity of dioxygen binding by dicobalt (II) diporphyrin compounds in nonaqueous solution at room temperature

Thermodynamic data were determined for the reversible binding of O₂ to two compounds of dicobalt(II) di(meso-tetra-phenyl)porphyrin derivatives with different lengths of diamidoaliphatic bridge (abbreviated to Co₂PP₈ and Co₂PP₄) in N,N-dimethylformamide at room temperature. The partial pressure of dioxygen necessary for half-oxygenation (P _1/2) and hill coefficient (n) at 298 K were determined as follows:P _1/2=54.2 kPa,n=2.0 for Co₂PP₈ andP _1/2=6.8 kPa,n=1.8 for Co₂PP₄, respectively. The rate equations of reversible oxygen binding by Co₂PP₈ were determined and the reaction path was proposed. The results of ther-modynamic and kinetic studies indicate that there exists strong cooperative effect during oxygenation of the compounds. The ESR observation reveals that the dioxygen complexes formed in the solutions are of superoxo (Co-O ₂ ⁻ ) type. Supported by the Research Foundation of the State Education Commission of China Zhou Xiaohai: born in 1962, Ph.D. Associate professor     

Interface bond mechanisms of ceramic-cemented carbide compact insert

Conclusion Ceramic-cemented carbide compact inserts have been developed by hot-pressing sintering techniques, the upper part of the compact insert is of Al₂O₃ + TiB₂ ceramic material, while the base part of the compact insert is of WC + Co cemented carbide. The compact insert makes full use of the advantages of the high hardness of ceramic materials and the high strength of cemented carbide, and its mechanical properties are just between that of Al₂O₃ + TiB₂ and WC + Co. SEM, XRD and electron microprobe analysis showed that element diffusion and formation of new phases are the main causes for the bond of Al₂O₃ + TiB₂ with WC + Co in the interface.