高效非硅氧漂稳定剂DQ05的性能及其应用

制备了一种新型的非硅氧漂稳定剂DQ05，并与硅酸钠对双氧水的稳定效果进行了对比．中试结果表明，DQ05在棉织物的冷轧堆漂白工艺中，其稳定效果接近传统的硅酸钠稳定剂；漂白后的产品白度、撕破强力均优于硅酸钠-双氧水漂白工艺的水平，是一种理想的氧漂稳定剂，有良好的应用前景。     

氧漂稳定剂的稳定性理论及其制备

本文详细讨论了双氧水漂白原理、氧漂稳定剂稳定机理及制备方法,指出了研究高效氧漂稳定剂的方向。     

次氯酸钠在棉针织物漂白中的影响因素

本文主要探讨了棉针织物在进行次氯酸钠漂白时,漂液PH、漂液温度、漂液浓度和时间、脱氧问题等因素产生的影响.     

次氯酸钠在棉针织物漂白中的影响因素

本文主要探讨了棉针织物在进行次氯酸钠漂白时，漂液PH、漂液温度、漂液浓度和时间、脱氧问题等因素产生的影响。     

Ｈ２Ｏ２的分解过程影响因素及其稳定剂

对Ｈ２Ｏ２的分解过程影响因素进行了研究,对Ｈ２Ｏ２的稳定剂进行了比较,Ｈ２－２２非硅型氧漂稳定剂效果最好,使Ｈ２Ｏ２８小时分解率为１.89％,漂白白度为８３％左右。     

过氧漂白影响因素的研究

报告了稳定剂、螯合剂和活化剂等添加剂以及过氧漂白的基本参数对漂白效果的影响 .通过实验证明 ,在过氧漂白中 ,稳定剂、漂白活化剂、螯合剂是必不可少的添加剂 .2 .5 %～ 5 %的硅酸钠、0 .2 5 %～ 1%的硫酸镁、1%～ 2 .5 %的柠檬酸、1.5 %～ 2 .5 %的 OOBS对于过氧化氢释放活性氧起到稳定或活化的作用 ,达到较好的漂白效果 .温度、时间、浓度可以互相补偿 .     

碱抽提强化的麦草浆二氧化氯漂白及ECF漂白流程研究

摘要：采用四种不同的碱抽提方式对麦草浆二氧化氯漂白(D0)进行强化,考查了不同碱抽提方式的强化效果,并对不同ECF漂白流程进行了对比研究。结果表明：在D0ED1漂白流程中,不同碱抽提方式对D0木素的修饰效果不同,就后续D1漂段而言,四种不同碱抽提模式下纸浆的可漂性顺序为：D0EOP>D0EP>D0EO>D0E。在D0ED1漂白流程中,D1段ClO2对白度的提升是有限的,达到白度极限后再增加ClO2用量对白度提高不明显。本实验条件下D1段ClO2用量以1.0%~1.2%为佳。从D0ED1与D0EP各漂白流程的对比来看,在终段漂白中以P取代D1效果要好,表明H2O2用于终段漂白其效果要好于ClO2。从其它ECF漂白流程的对比来看,D0EPP和D0EOPP流程漂白效果优于其它流程。本实验条件下采用D0EPP和D0EOPP漂白流程,麦草浆漂后白度可分别达到83.8%和85.7%。     

大豆蛋白织物的催化漂白

探讨漂白预处理工艺条件，清洗助剂及氧漂工艺条件对大豆蛋白织物漂白效果的影响。得到预处理工艺：FeSO415%(o.w.f）、pH值4－5、70℃处理35min；洗涤条件：0．5g/L的次亚磷酸钠，70℃清洗；漂白条件：稳定剂LJC5g/L、pH值7－8、85℃漂白50min。按上述工艺漂白，效果较为满意。     

自由基与纸浆漂白（Ⅱ）—自由基的控制和碳水化合物的保护

介绍预处理降低未漂浆中的过渡金属离子含量和在漂白过程中添加助剂控制自由基、保护碳水化合物的途径,以便达到提高漂白选择性,改善漂白效果,降低漂白废水污染等目的。     

蔗渣浆全无氯漂白的研究

本本文探讨了在Op段低NaOH用量,P段低H2O2用量的条件下采用OpQP流程将蔗渣浆漂至82%ISO的可行性,并讨论了非硅过氧化氢漂白稳定剂代替硅酸钠用于过氧化氢漂白的可行性。研究表明非硅过氧化氢稳定剂PP-2,PP-1耐高温、高压,可用于压力过氧化氢漂白。在Op段2%NaOH,0.5%H2O2;P段3% H2O2,PP-1 0.1%, PP-2 0.5%条件下,蔗渣浆采用OpQPo流程,漂后浆白度达到85%ISO。OpQPo从根本上消除了AOX的产生,经测定漂白废水属于可生物降解废水,只有Q和P段的部分废水进入废水处理系统, 容易通过常规的污水处理方法达到日益严格的国家排放标准。     

Markedness and its Interpretation in Language Use

Language markedness is a common phenomenon in languages, and is reflected from hearing, vision and sense, i.e. the variation in the three aspects such as phonology, morphology and semantics. This paper focuses on the interpretation of markedness in language use following the three perspectives, i.e. pragmatic interpretation, psychological interpretation and cognitive interpretation, with an aim to define the function of markedness.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

低渗透非均质砂岩油藏启动压力梯度研究

理论推导与室内实验相结合,建立了低渗透非均质砂岩油藏启动压力梯度确定方法。首先借助油藏流场与电场相似的原理,推导了非均质砂岩油藏启动压力梯度计算公式。其次基于稳定流实验方法,建立了非均质砂岩油藏启动压力梯度测试方法。结果表明:低渗透非均质砂岩油藏的启动压力梯度确定遵循两个等效原则。平面非均质油藏的启动压力梯度等于各级渗透率段的启动压力梯度关于长度的加权平均;纵向非均质油藏的启动压力梯度等于各渗透率层的启动压力梯度关于渗透率与渗流面积乘积的加权平均。研究成果可用于有效指导低渗透非均质砂岩油藏的合理井距确定,促进该类油藏的高效开发。     

On Tragic Consciousness In The Works By Ernest Hemingway

As an American modern novelist who were famous in the literary world, Hemingway was not a person who always followed the trend but a sharp observer. At the same time, he was a tragedy maestro, he paid great attention on existence, fate and end-result. The dramatis personae's tragedy of his works was an extreme limit by all means tragedy on the meaning of fearless challenge that failed. The beauty of tragedy was not produced on the destruction of life, but now this kind of value was in the impact activity. They performed for the reader about the tragedy on challenging for the limit and the death.     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with