磁珠提取技术在副溶血弧菌检测中的应用

副溶血弧菌(Vibrio parahaemolyticus)是一种常见的食源性致病菌,为解决副溶血弧菌检测步骤复杂且周期长的问题,研究开发了一种磁珠提取与PCR联用技术快速检测食品中的副溶血弧菌。首先通过碱性共沉淀法完成Fe₃O₄磁珠的制备,随后在室温条件下通过水解正硅酸乙酯完成Fe₃O₄@SiO₂磁珠制备。探讨了正硅酸乙酯添加量对Fe₃O₄@SiO₂磁珠粒径和磁性的影响。以DNA提取能力为目标,已知浓度DNA为提取对象,分析了Fe₃O₄@SiO₂磁珠粒径和提取体系pH值对Fe₃O₄@SiO₂磁珠与DNA结合能力的影响。结果表明,Fe₃O₄@SiO₂磁珠结合副溶血弧菌DNA的较佳粒径为105.89nm、Fe₃O₄@SiO₂磁珠的SiO₂层为25nm,此条件下Fe₃O₄@SiO₂磁珠表面光滑、分散性良好、饱和磁化强度高,在磁场的作用下10s即可完成副溶血弧菌DNA与杂质的分离,副溶血弧菌DNA的提取率高达80%(提取体系pH值为5.0)。采用优化后的Fe₃O₄@SiO₂磁珠进行DNA提取,结合PCR联用技术,对92份市售水产样品(32份对虾、25份牡蛎、35份贻贝)进行副溶血弧菌筛查。结果表明,Fe₃O₄@SiO₂磁珠提取的DNA均可直接用于PCR检测,被测水产样品中有17份样本的副溶血弧菌检测结果为阳性。此技术与国标检测方法(GB 4789.7—2013)相比,检测时间由一周缩短至4h,提高了副溶血弧菌的检测效率。磁珠提取结合PCR联用技术可检测不同食品中的多种微生物菌种,此研究为食品中的微生物快速检测提供了一种实用新方法。     

亚铁联合不同氧化剂对石油烃污染场地热脱附废水的处理

采用亚铁（Fe²⁺）分别联合次氯酸钠（NaClO）、过硫酸钠（Na?S?O₈）和过氧化氢（H₂O₂） 3种氧化剂处理某原油浸染土壤的热脱附废水，考察了pH值、Fe²⁺投加量、氧化剂投加量和反应时间对处理效能的影响。Fe²⁺/H₂O₂和Fe²⁺/ Na?S?O₈均能有效去除热脱附废水中的典型污染物——石油烃物质，去除率分别达到100.0%和97.8%，但Fe²⁺/H₂O₂体系对化学耗氧量（COD）的去除效果明显优于Fe²⁺/Na?S?O₈。Fe²⁺/H₂O₂可将有机物彻底氧化分解，而Fe²⁺/NaClO和Fe²⁺/Na?S?O₈仅是将有机物氧化分解为中间物质。多元变量分析结果表明，pH值和氧化剂投加量是影响去除效果的主要因素，Fe²⁺/H₂O₂处理热脱附废水的吨水处理成本较高，但是综合效果最好；Fe²⁺/Na?S?O₈处理成本次之，但无法彻底降解COD；Fe²⁺/NaClO成本最低，但对有机物去除效果最差。综合去除效果和经济因素考量， Fe²⁺/H₂O₂体系更适用于处理热脱附废水。     

纳米α-Fe2O3可见光催化剂的制备及掺杂改性研究进展

纳米α相三氧化二铁（α-Fe₂O₃）具有化学性质稳定、环境友好、制备成本低和窄禁带宽度的特性,是一种理想的可见光催化剂。文章介绍了α-Fe₂O₃不同制备方法的研究进展,尤其总结了一些特殊结构的制备工艺。着重分析了掺杂剂种类对α-Fe₂O₃的光催化降解有机污染物活性的影响和影响机制,并总结了α-Fe₂O₃光催化剂掺杂改性研究的发展趋势。     

Fe3O4@NiSiO3纳米催化剂制备及催化臭氧化降解对苯二甲酸性能研究

采用水热法和溶胶凝胶法制备Fe₃O₄@SiO₂纳米颗粒,经表面镍刻蚀得到Fe₃O₄@NiSiO₃磁性纳米催化剂。利用XRD、TEM和VSM等手段表征催化剂的晶体和表面结构。构建类均相催化臭氧化体系,考察其催化降解对苯二甲酸性能。结果表明：在臭氧通入量10.52 mg.min_-1、催化剂投加量40 mg.L_-1和初始溶液pH=9的条件下,催化臭氧化反应20 min时对苯二甲酸降解率为78.13%,TOC去除率27.25%;5次循环实验后,PTA降解率仅下降2.75%。     

基于新型金属有机框架模拟酶的电化学检测食品胆固醇体系的构建

基于金属有机框架具有模拟酶的特性,构建实时检测胆固醇电化学传感器。采用自组装的方法制备出新型的复合金属有机框架模拟酶(Fe₃O₄@Au/MOF)纳米粒子,其兼具了Fe₃O₄磁性粒子的可回收特点以及金纳米粒子的加速电子转移等优点。并利用红外光谱、透射电子显微镜以及X射线光电子能谱对制备成功的Fe₃O₄@Au/MOF的结构和形貌进行表征。借助Fe₃O₄@Au/MOF的类过氧化物酶双重催化性能使胆固醇氧化为胆甾烯三酮和H₂O₂,而H₂O₂在其进一步的催化下产生的具有氧化活性的羟基自由基可促进3,3′,5,5′-四甲基联苯胺发生氧化还原反应,进而增加了体系中电荷的移动。根据电信号的响应情况, 从而实现对胆固醇的快速定性和高效定量的检测。研究结果表明,采用循环伏安法测得优化检测体系为:反应温度为 50℃,Fe₃O₄@Au/MOF 添加量为0.0125g,扫描速率为0.10V/s,缓冲溶液pH=4;当胆固醇浓度处于0.001~1.500mmol/L时呈现良好的线性关系,线性回归方程为y=20.6401x+4.7722,R²=0.9956,最低检测限为2.7μmol/L;且检测体系具有良好的回收率和抗干扰性,在食品分析和生化分析等方面具有良好的应用前景。     

Fe2O3在锂离子电池负极材料中的研究进展

近年来,锂离子电池被广泛地应用于便携式电子设备和手机,并且对于诸如电动汽车等更高要求的应用而言具有巨大的潜力。作为锂离子电池负极材料,Fe₂O₃是最有可能替代石墨的过渡金属氧化物之一。因其具有高的理论比容量（1 007 mA·h·g^-1）、储量丰富、安全性能好、无毒、环境友好和成本低等一系列优点,被广泛应用于气体传感器、催化和锂离子电池电极材料等领域,是一种具有巨大潜力的电极材料。介绍了锂离子电池的基本结构组成和工作原理,综述了Fe₂O₃的储锂机制和制备方法,总结了近年来Fe₂O₃以及它的复合物作为锂离子电池负极材料的研究进展。     

CoFe2O4-Al2O3复合材料的制备及其在含日落黄废水处理中的应用

制备了铁酸钴-氧化铝（CoFe₂O₄-Al₂O₃）复合材料,并采用扫描电子显微镜（SEM）、X射线衍射（XRD）、比表面积和孔径分析仪对多孔CoFe₂O₄-Al₂O₃复合材料的物相和形貌进行了分析. 利用制备的CoFe₂O₄-Al₂O₃复合材料活化过硫酸氢钾（PMS）来降解废水溶液中的日落黄（SY）,通过研究CoFe₂O₄-Al₂O₃材料制备过程中Co²⁺,Fe³⁺和Al³⁺的物质的量之比、煅烧温度和时长对材料催化性能的影响,发现Co²⁺,Fe³⁺和Al³⁺的最佳物质的量之比为1:2:12,最佳煅烧温度为400 ℃和最佳煅烧时长为3 h. 对采用在最优条件下制得的CoFe₂O₄-Al₂O₃复合材料作为催化剂,PMS氧化降解含日落黄废水进行研究,考察了pH值、温度、不同体系、PMS用量、CoFe₂O₄-Al₂O₃材料用量和一些阴离子对日落黄降解的影响. 结果表明：在pH=7,温度为55 ℃条件下,用0.1 g催化剂和0.125 g PMS能使100 mL质量浓度为0.6 g·L^-1的日落黄溶液在30 min内降解率达到99.5%. 同时,碳酸氢根负离子（HCO₃^-）和硝酸根负离子（NO₃^-）的加入抑制了日落黄的降解,而Cl^-则能促进日落黄的降解. 此外,在进行4次循环使用后,CoFe₂O₄-Al₂O₃仍表现出很好的催化性能,日落黄去除效果仍能达到90%以上.     

芬顿-臭氧组合处理柠檬酸镍废水的实验研究

以初始镍质量浓度为50 mg/L的柠檬酸镍废水为研究对象,第一段采用芬顿法进行破络,第二段采用“O₃/Fe²⁺”臭氧组合工艺进一步处理。探讨了芬顿段H₂O₂投加量和臭氧组合工艺中pH、臭氧投加量、Fe²⁺投加量、干扰离子对于镍离子去除效果的影响。实验结果表明,芬顿段最佳条件:H₂O₂投加量为0.15 mL/L,初始pH为5.0,Fe²⁺投加量为111.11 mg/L,反应时间为12 min;臭氧组合工艺段最佳条件:维持O₃质量浓度为30 mg/L,反应时间为18 min,在两段工艺的最佳条件下,柠檬酸镍废水中约99.8%的柠檬酸镍得以去除,出水镍浓度达到国家排放标准。     

一种检测电芬顿体系下DNA损伤的电化学生物传感器的研制

为了检测电芬顿体系下DNA的损伤,先采用石墨烯制备了一种致密的rGO/Fe₃O₄复合材料;再将复合材料和DNA修饰到玻碳电极上,利用电化学还原作用释放游离态Fe²⁺,并加入H₂O₂形成电芬顿体系;最后构建了一种检测电芬顿体系下DNA损伤的新型电化学生物传感器。检测结果表明,检测DNA损伤的最佳时间为30 min,最佳pH值为7.0。     

Fe3O4@NiSiO3催化剂制备及其催化芬顿氧化降解染料性能研究

通过溶剂热法和溶胶凝胶法制备Fe₃O₄@NiSiO₃纳米催化剂,并利用TEM、XRD、VSM、BET进行表征。构建非均相芬顿氧化体系,由单因素实验得出在最佳降解条件为, pH值为5.5、催化剂投加量为1.00 g.L_-1、H₂O₂投加量为2.5%时,罗丹明B的降解率达95%以上。利用磁性分离催化剂并重复利用5次,罗丹明B降解率无明显降低,证明Fe₃O₄@NiSiO₃纳米催化剂重复利用性能良好。同时,考察了该催化剂对其它四种染料：酸性大红3R、孔雀石绿、甲基橙、亚甲基蓝的催化芬顿氧化降解性能。结果表明,孔雀石绿、罗丹明B、亚甲基蓝的降解率均达95%,但偶氮类染料降解率较低。通过对比实验进一步研究表明,Ni元素对芬顿反应起促进作用。     

Markedness and its Interpretation in Language Use

Language markedness is a common phenomenon in languages, and is reflected from hearing, vision and sense, i.e. the variation in the three aspects such as phonology, morphology and semantics. This paper focuses on the interpretation of markedness in language use following the three perspectives, i.e. pragmatic interpretation, psychological interpretation and cognitive interpretation, with an aim to define the function of markedness.     

Lower Paleozoic oil relationships within Williston Basin, Canada

The Williston Basin is a significant petroleum province, containing oil production zones that include the Middle Cambrian to Lower Ordovician, Upper Ordovician, Middle Devonian, Upper Devonian and Mississippian and within the Jurassic and Cretaceous. The oils of the Williston Basin exhibit a wide range of geochemical characteristics defined as "oil families", although the geochemical signature of the Cambrian Deadwood Formation and Lower Ordovician Winnipeg reservoired oils does not match any "oil family". Despite their close stratigraphic proximity, it is evident that the oils of the Lower Palaeozoic within the Williston Basin are distinct. This suggests the presence of a new "oil family" within the Williston Basin. Diagnostic geochemical signatures occur in the gasoline range chromatograms, within saturate fraction gas chromatograms and biomarker fingerprints. However, some of the established criteria and cross-plots that are currently used to segregate oils into distinct genetic families within the basin do not always meet with success, particularly when applied to the Lower Palaeozoic oils of the Deadwood and Winnipeg Formation.     

An Analysis of Catherine＇s Character——Wuthering Heights

Wuthering Heights, Emily Bronte＇s only novel, was published in December of 1847 under the pseudonym Ellis Bell. The book did not gain immediate success, but it is now thought one of the finest novels in the English language. Catherine is the key character of this masterpiece, because everybody and everything center on her though she had a short life. We can understand this masterpiece better if we know Catherine well.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

Design and analysis of generic LBS application developing platform

Location based services is promising due to its novel working style and contents.A software platform is proposed to provide application programs of typical location based services and support new applications developing efficiently. The analysis shows that this scheme is easy implemented, low cost and adapt to all kinds of mobile nework system.     

橡胶颗粒沥青混合料低温抗裂性试验研究

以AC-13级配为基础,将橡胶颗粒代替部分集料掺入混合料中,以低温弯曲试验为评价方法对不同橡胶颗粒掺量下沥青混合料的低温抗裂性进行研究,并引入应变能密度值对混合料的低温抗裂性进行综合评价.试验结果表明:橡胶颗粒沥青混合料试件的破坏微应变均超过2 300,满足冬寒区的技术指标;无论是否掺加橡胶颗粒,随着温度的下降,沥青混合料破坏时的最大弯拉强度增大,弯拉应变降低,劲度模量增大;弯曲应变能密度在胶粒掺量为1%左右时具有较大的弯曲应变能密度值,此时橡胶颗粒沥青混合料具有较好的低温抗裂性.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

低渗透非均质砂岩油藏启动压力梯度研究

理论推导与室内实验相结合,建立了低渗透非均质砂岩油藏启动压力梯度确定方法。首先借助油藏流场与电场相似的原理,推导了非均质砂岩油藏启动压力梯度计算公式。其次基于稳定流实验方法,建立了非均质砂岩油藏启动压力梯度测试方法。结果表明:低渗透非均质砂岩油藏的启动压力梯度确定遵循两个等效原则。平面非均质油藏的启动压力梯度等于各级渗透率段的启动压力梯度关于长度的加权平均;纵向非均质油藏的启动压力梯度等于各渗透率层的启动压力梯度关于渗透率与渗流面积乘积的加权平均。研究成果可用于有效指导低渗透非均质砂岩油藏的合理井距确定,促进该类油藏的高效开发。     

On Tragic Consciousness In The Works By Ernest Hemingway

As an American modern novelist who were famous in the literary world, Hemingway was not a person who always followed the trend but a sharp observer. At the same time, he was a tragedy maestro, he paid great attention on existence, fate and end-result. The dramatis personae's tragedy of his works was an extreme limit by all means tragedy on the meaning of fearless challenge that failed. The beauty of tragedy was not produced on the destruction of life, but now this kind of value was in the impact activity. They performed for the reader about the tragedy on challenging for the limit and the death.     

Quantitative trait loci （QTLs） for quality traits related to protein and starch in wheat

Quality traits in wheat （Triticum aestirum L.） were studied by quantitative trait locus （QTL） analysis in a recombinant inbred line （RIL） population, a set of 131 lines derived from Chuan 35050 × Shannong 483 cross （ChSh）. Grains from RILs were assayed for 21 quality traits related to protein and starch. A total of 35 putative QTLs for 19 traits with a single QTL explaining 7.99-40.52% of phenotypic variations were detected on 10 chromosomes, 1D, 2A, 2D, 3B, 3D, 5A, 6A, 6B, 6D, and 7B. The additive effects of 30 QTLs were positive, contributed by Chuan 35050, the remaining 5 QTLs were negative with the additive effect contributed by Shannong 483. For protein traits, 15 QTLs were obtained and most of them were located on chromosomes 1 D, 3B and 6D, while 20 QTLs for starch traits were detected and most of them were located on chromosomes 3D, 6B and 7B. Only 7 QTLs for protein and starch traits were co-located in three regions on chromosomes 1D, 2A and 2D. These protein and starch trait QTLs showed a distinct distribution pattern in certain regions and chromosomes. Twenty-two QTLs were clustered in 6 regions of 5 chromosomes. Two QTL clusters for protein traits were located on chromosomes 1D and 3B, respectively, three clusters for starch traits on chromosomes 3D, 6B and 7B, and one cluster including protein and starch traits on chromosome 1D.