垃圾填埋场渗沥液厌氧处理的研究

研究了两相厌氧消化系统和单相的上流式厌氧污泥床──生物滤床组合型系统（ＵＢＦ）在不同条件下处理垃圾填埋场渗沥液的运行特性，结果表明，两相厌氧消化用于处理本研究用的废水没有显著效果．采用单相ＵＢＦ系统，当温度为３５℃，水力停留时间为１２ｈ，ＣＯＤＣｒ容积负荷率为每天每立方米１０ｋｇ，每天每千克ＶＳＳ的ＣＯＤＣｒ污泥负荷率为０．５３ｋｇ时，ＣＯＤＣｒ去除率平均为的９４％，产气量４．７７Ｌ·Ｌ－１·ｄ－１．其中甲烷含量为７５．８％．     

厌氧一微氧生物法处理味精生产废水的研究

采用热絮凝、汽提等方法对味精废水进行预处理,ＣＯＤ、ＮＨ２－Ｎ和ＳＯ２-4分别去除５０％、８０％和６０％以上．考察了ＵＡＳＢ反应器与ＣＳＴＲ光合反应器厌氧－微氧串联系统治理味精废水效果,在进料ＣＯＤ浓度为２５．６ｇ／Ｌ条件下,其ＣＯＤ处理能力达３．９ｋｇ／ｄｍ３,ＣＯＤ去除率达９７％．     

厌氧一微氧生物法处理味精生产废水的研究

采用热絮凝、汽提等方法对味精废水进行预处理,ＣＯＤ、ＮＨ２－Ｎ和ＳＯ２-4分别去除５０％、８０％和６０％以上．考察了ＵＡＳＢ反应器与ＣＳＴＲ光合反应器厌氧－微氧串联系统治理味精废水效果,在进料ＣＯＤ浓度为２５．６ｇ／Ｌ条件下,其ＣＯＤ处理能力达３．９ｋｇ／ｄｍ３,ＣＯＤ去除率达９７％．     

利用AB技术处理高浓度石油化工废水的研究

本文利用ＡＢ法废水生物处理技术进行治理高浓度石油化工废水的试验研究，通过ＡＢ法和普通活性污泥法处理高浓度石油化工废水对比性试验，系统地考察了两种方法的进水负荷、耐冲击负荷、活性污泥性状和处理效率等指标。研究结果表明：ＡＢ法在进水ＣＯＤ为１６００ｍｇ／Ｌ，ＢＯＤ５为８００ｍｇ／Ｌ，苯酚浓度为６００ｍｇ／Ｌ，总容积负荷为１２ｋｇＣＯＤ／ｍ＾３ｄａｙ的条件下，ＣＯＤ去除率为９６．５％，ＢＯＤ５去除率达９     

Cl~- 和 SO_4~(2-) 对厌氧废水处理的抑制阈值

用人工配制高浓度有机废水分别研究了Ｃｌ－和ＳＯ２－４对厌氧生物废水处理的抑制作用和抑制阈值．在全混流厌氧恒化器和上流式厌氧污泥床（ＵＡＳＢ）反应器中分别得到了对厌氧消化基本无抑制作用（全混流恒化器：Ｃｌ－＜４．５ｇ／Ｌ,ＳＯ２－４＜１．８ｇ／Ｌ;ＵＡＳＢ：Ｃｌ－＜７．２ｇ／Ｌ,ＳＯ２－４＜３．０ｇ／Ｌ）;轻度抑制（全混流恒化器：Ｃｌ－＝４．５～６．０ｇ／Ｌ,ＳＯ２－４＝１．８～３．３ｇ／Ｌ;ＵＡＳＢ：Ｃｌ－＝７．２～８．２ｇ／Ｌ,ＳＯ２－４＝３．０～４．１ｇ／Ｌ）;中度抑制（全混流恒化器：Ｃｌ－＝６．０～１３．８ｇ／Ｌ,ＳＯ２－４＝３．３～６．５ｇ／Ｌ;ＵＡＳＢ：Ｃｌ－＝８．２～１０．０ｇ／Ｌ,ＳＯ２－４＝４．１～６．０ｇ／Ｌ）和重度抑制（全混流恒化器：Ｃｌ－＞１３．８ｇ／Ｌ,ＳＯ２－４＞６．５ｇ／Ｌ;ＵＡＳＢ：Ｃｌ－＞１０．０ｇ／Ｌ,ＳＯ２－４＞６．０ｇ／Ｌ）的不同Ｃｌ－和ＳＯ２－４浓度范围．     

光合细菌降解3种有机废水的试验研究

选用从有机废水中分离出的７株光合细菌菌株，并用于处理豆制品、淀粉、肉制品废水。研究试验表明：①经对ＣＯＤ＿（Ｃｒ）＝５２８００ｍｇ／Ｌ的豆制品废水进行１４４ｈ的处理，去除率达９２．７％；②经对ＣＯＤ＿（Ｃｒ）＝３８６４ｍｇ／Ｌ的淀粉废水进行７２ｈ处理，去除率达９９．５％；③经对ＣＯＤ＿（Ｃｒ）＝５０ｌ０ｍｇ／Ｌ的肉制品废水进行７２ｈ处理，去除率达９３％。另通过光合细菌菌株对不同浓度不同性质的废水处理比较、单菌株与混合菌株的比较；时间、ｐＨ值、接种量等因素对处理的影响比较，均得到了今人满意的处理试验结果。     

多阶段水解—好氧工艺处理淀粉废水的研究

采用多阶段水解－好氧串联工艺处理高浓度玉米演粉废水。试验结果表明：①废水经多阶段水解－好氧工艺的水解段Ｈ１后,废水的ρ（ＢＯＤ５）／ρ（ＣＯＤｃｒ）从０．９０提高到０．９５;废水经水解段Ｈ２后,废水的ρ（ＢＯＤ５）／ρ（ＣＯＤｃｒ）从０．９７,说明水解段具有提高废水可生化性的功能。②在总水力停留时间（ＨＲＴ）为６０ｈ、进水ｐＨ为５．９～６．０８和进水ρ（ＣＯＤｃｒ）、ρ（ＢＯＤ５）、ρ（ＮＨ４＾＋     

电渗析法处理味精废水

用电渗析－ＢＡＲ厌氧生物反应器对味精废水进行处理,结果表明,用电渗法能有效去除经预处理后的味精废水的氯离子,通过能耗和脱除率的综合比较,选定电渗析的隔离流速为３．４ｃｍ／ｓ,当脱盐率大于７０％（即ρ（Ｃｌ＾－１）〈６ｇ／Ｌ,每处理１ｔ废水耗电约１．８３ｋＷ．ｈ,脱氯后的废水,用ＢＡＲ厌氧生物反应器在中温（３５℃）条件下处理,当反应器的ＣＯＤｃｒ容积负荷小于１４ｋｇ／（ｍ＾３．ｄ）时,ＣＯＤｃｒ的去除率可达９０％以上。     

处理污凝水的研究

通过静态实验研究，证明了某硫酸盐纸浆厂污冷凝水的可厌氧降解性；发现了污冷凝水中有机物降解速率与其浓度的一次方成正比，速率常数Ｋｍ为０．２４ｈ~（－１），在１７Ｌ的ＵＡＳＢ反应器内对此废水进行了动态厌氧处理研究，结果表明，ＣＯＤ去除率可达７２％～８５％，还发现了反应器中有颗粒污泥出现．     

UASB＋AF反应器处理针织印染废水起动过程的研究

以生产性针织印染废水为基质，将七种高效脱色菌及紫色非硫光合细菌固定在活性污泥载体上，投加至ＵＡＳＢ＋ＡＦ反应器中，在常温下起动成功，培养出颗粒污泥。培养条件：水温２０～２３℃；ｐＨ值７．２～７．５；容积负荷０．５ｋｇ，ＣＯＤ／ｍ￣３．ｄ～５．０ｋｇ，ＣＯＤ／ｍ￣３．ｄ；水力停留时间（ＨＲＴ）由３１ｈ缩短至１０ｈ；色度去除率９０％以上，ＣＯＤ去除率７０％以上。     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

Perspherical Approaches for Electrons in Atoms and Charged Excitons in Quantum Wells

Instead of following Fock’s expansion,we solve the Schrodinger equation for some quantum mechanical manybody systems such as electrons in atoms and charged excitons in quantum wells in a similar way in hyperspherical coordinates by expanding the wave functions into orthonormal complete basis sets of the hyperspherical hannonics(HHs)of hyperangles and generalized Laguerre polynomials(GLPs)of the hyperradius.This leads the equation to     

Advances in broadband wireless communications under high-mobility scenarios

Future mobile communication systems aim at providing very high data transmission rates, even in high-mobility scenarios such as high-speed wheel-track trains, maglev trains, highway vehicles, airplanes, guided missiles or spacecraft. A particularly important commercial application is the strong and increasing worldwide demand for high- speed broadband wireless communications （up to 574.8 km/ h test speeds or 380 km/h commercial speeds） in railways, providing data, voice and video services for applications such as onboard entertainment services to passengers, train control, train dispatch, train sensor status handling and sur- veillance. In such high-mobility scenarios, there are a number of communication challenges, including fast hand- over, location updating, high-speed channel modeling, estimation and equalization, anti-Doppler spreading tech- niques, fast power control, and dedicated network architec- ture. Because signal transmission in very high-speed scenarios will inevitably experience serious deterioration, it is imperative to develop key broadband mobile communi- cation techniques for such high-speed vehicles.     

Wuhan University Journal of Natural Sciences TOTAL CONTENTS

<正>~~     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Scale-based spatial data model for GIS

Being the primary media of geographical information and the elementary objects manipulated, almost all of maps adopt the layer-based model to represent geographic information in the existent GIS. However, it is difficult to extend the map represented in layer-based model. Furthermore, in Web-Based GIS, It is slow to transmit the spatial data for map viewing. In this paper, for solving the questions above, we have proposed a new method for representing the spatial data. That is scale-based model. In this model we represent maps in three levels: scale-view, block, and spatial object, and organize the maps in a set of map layers, named Scale-View, which associates some given scales.Lastly, a prototype Web-Based GIS using the proposed spatial data representation is described briefly.     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to