Involvement of NADPH oxidase NtrbohD in the rapid production of H2O2 induced by ABA in cultured tobacco cell line BY-2

The mechanisms for the production of hydrogen peroxide (H₂O₂) induced by abscisic acid (ABA) were investigated in suspension culture cells of tobacco BY-2 cells. The results showed that the immediate generation of H₂O₂, which was mainly derived from superoxide dismutase-catalyzed dismutation of superoxide radical, was significantly induced by ABA. Furthermore, treatment of the cultured tobacco cells with ABA resulted in a time-dependent quick increase in plasma membrane (PM) NADPH oxidase activity, which coincided on time and magnitude with the elevation in ABA-induced accumulation of H₂O₂. Moreover, these enhanced effects were pronouncedly inhibited by two NADPH oxidase inhibitor, diphenylene iodonium and imidazole, suggesting that PM NADPH oxidase is involved in the rapid accumulation of ₂O₂ in cultured tobacco cells. In addition, analysis of the expression level of NtrbohD, a PM NADPH oxidase gene in tobacco, by RT-PCR and protein gel blot revealed that the gene at both mRNA and protein levels was upregulated by ABA, indicating that NtrbohD participates in the ABA-stimulated rapid production of H₂O₂ in tobacco culture cells. Taken together, these findings suggest that ABA induces the rapid accumulation of reactive oxygen species via NADPH oxidase in suspension culture cells of tobacco, and that NADPH oxidase and H₂O₂ appear to be important components in ABA signal transduction pathway in plants.     

Involvement of NADPH oxidase NtrbohD in the rapid production of H2O2 induced by ABA in cultured tobacco cell line BY-2

The mechanisms for the production of hydrogen peroxide （H2O2） induced by abscisic acid （ABA） were investigated in suspension culture cells of tobacco BY-2 cells. The results showed that the immediate generation of H2O2, which was mainly derived from super-oxide dismutase-catalyzed dismutation of superoxide radical, was significantly induced by ABA. Furthermore, treatment of the cultured tobacco cells with ABA resulted in a time-dependent quick increase in plasma membrane （PM） NADPH oxidase activity, which coin- cided on time and magnitude with the elevation in ABA-induced accumulation of H2O2. Moreover, these enhanced effects were pro- nouncedly inhibited by two NADPH oxidase inhibitors, diphenylene iodonium and imidazole, suggesting that PM NADPH oxidase is involved in the rapid accumulation of H2O2 in cultured tobacco cells. In addition, analysis of the expression level of NtrbohD, a PM NADPH oxidase gene in tobacco, by RT-PCR and protein gel blot revealed that the gene at both mRNA and protein levels was upregulated by ABA, indicating that NtrbohD participates in the ABA-stimulated rapid production of H2O2 in tobacco culture cells. Taken together, these findings suggest that ABA induces the rapid accumulation of reactive oxygen species via NADPH oxidase in sus-pension culture cells of tobacco, and that NADPH oxidase and H2O2 appear to be important components in ABA signal transduction pathway in plants.     

植物叶片H_2O_2胁迫应答蛋白质组学分析

植物叶片是感知外界H_2O_2胁迫信号的重要器官.整合分析了水稻(Oryza sativa)、小麦(Triticum aestivum)、二穗短柄草(Brachypodium distachyon)和柑橘(Citrus aurantium)在应对不同程度H_2O_2胁迫时蛋白质表达模式的变化特征.阐明了H_2O_2胁迫应答网络体系中的信号与代谢通路(如:光合作用、糖类与能量代谢、转录调控、蛋白质合成与命运、胁迫防御、信号转导和基础代谢等)的变化及植物叶片应答H_2O_2胁迫的分子调控机制.     

基于Pt-Au-MoS2-ITO传感器对于H2O2的还原检测

实验探究了二硫化钼（MoS₂）作为一种新型材料与贵金属纳米粒子金（Au）、铂（Pt）的复合基底对于过氧化氢（H₂O₂）的还原性检测,采用氧化铟锡导电玻璃（ITO）作为电极,制备出了基于Pt-Au-MoS₂-ITO的生物传感器,为H₂O₂还原性检测的便携性操作打下了基础.实验采用电化学沉积的方法制备材料,同时使用循环伏安（CV）法、计时电流法等传统电化学手段表征了传感器电化学性能,采用场发射扫描电子显微镜（FE-SEM）来表征传感器表面形貌.建立了用于H₂O₂还原检测的、具有高检测限、高灵敏度和宽检测范围的传感器.     

聚苯胺/钛酸纳米复合材料的合成及其电化学和可见光催化性能的研究与应用

聚苯胺(PANI)/钛酸(H_2Ti_4O_9)层状纳米复合材料以苯胺(ANI)/H_2Ti_4O_9为前驱体,通过原位聚合的方法合成。复合材料的合成过程、形貌和结构通过XRD、SEM、IR和TGA/DSC表征手段进行研究。苯胺以单层且苯环垂直于层板的方式排列在H_2Ti_4O_9层间,聚合后的聚苯胺分子以单层方式排列在层间。PANI/H_2Ti_4O_9复合材料具有优异的热稳定性、氧化还原活性以及可见光催化降解亚甲基蓝活性,在电化学传感器和污水处理方面具有潜在的应用前景。     

氧化吸收法同步脱除燃烧烟气中SO2，NOx和CO2的化学热力学及其评价

湿化学法同步脱除烟气中气态污染物是燃烧源大气污染控制的重要方法之一,为探究采用不同氧化吸收策略同时脱除燃烧烟气中SO_2,NO_x和CO_2的可行性,基于化学热力学原理,分析了9种联合氧化吸收策略的性能,具体的氧化吸收策略包括:H_2O_2-NH_3·H_2O,H_2O_2-MDEA,H_2O_2-NaOH,O3-NH_3·H_2O,O3-MDEA,O3-NaOH,NaClO_2-NH_3·H_2O,NaClO_2-MDEA和NaClO_2-NaOH,并提出新的动态加权法对其性能进行综合评价。结果表明:上述所有策略均具有SO_2,NO_x和CO_2捕获的可行性。O3-NaOH,NaClO_2-MDEA和NaOH做吸收剂的氧化吸收溶液分别对单一脱硫、脱硝和脱碳效果最好。当综合考虑同步脱除SO_2,NO_x和CO_2时,NaClO_2-MDEA优于其他策略,其结果可为燃烧烟气中的气体污染物的联合脱除提供参考。     

不同形貌LaBO_3型钙钛矿的制备及其催化H_2O_2分解反应性能

采用柠檬酸络合法制备了La BO3(B=Fe,Co,Ni)钙钛矿催化剂,通过X-射线粉末衍射(XRD)、傅立叶-红外光谱(FT-IR)、透射电镜(TEM)、X-射线光电子能谱(XPS)等对催化剂进行了表征,在室温下测定了其对H2O2的催化分解能力.结果表明:催化分解能力依次为La Ni O3>La Co O3>La Fe O3,说明Ni较Co和Fe能更好地分解H2O2.通过改变La Fe O3催化剂的形貌也能提高催化剂性能,如多孔状La Fe O3较负载在SBA-15上的La Fe O3具有更好的催化分解活性.     

纳米Fe2O3-Al2O3复合材料的制备

采用溶胶-凝胶表面包覆法制备了纳米Fe₂O₃-Al₂ O₃复合材料, 利用X射线衍射和透射电镜对样品的物相、 粒度和形貌进行了研 究. 结果表明, α-Fe₂O₃掺杂降低了Al₂O₃相变温度, 在900 ℃可以得到稳定的α-Al₂O₃相.     

Degradation of 2, 4-D acid using Mn2+ as catalyst under UV irradiation

In this paper, the oxidative degradation of 2, 4-dichlorophenoxyacetic acid (2, 4-D) using Mn²⁺/H₂O₂ reagent under UV irradiation was studied. The results show that 2, 4-D was degraded more completely in Mn²⁺/H₂O₂ solution than traditional Fenton solutions. The effects of the concentration of Mn²⁺, H₂O₂ and pH were also investigated. And under the optimal condition of 1.48×10⁻⁴ mol/L, 8.99×10⁻⁵ mol/L and pH 3.38, the formation of ·OH was the most, both the decomposition rate of H₂O₂ and the degradation rate of 2, 4-D were the fastest. In addition, the photoreaction process was monitored using spin-trapping electron paramagnetic resonance (EPR), and the results indicated that the oxidative process was predominated mainly by the hydroxyl radical (·OH) gennerated in the system. Biography: HUANG Yingping (1964–), Professor, Ph. D., research direction: pollution ecology and water pollution control.     

纳米Al2O3颗粒对Cu-Al2O3性能的影响

采用溶胶-凝胶法制备纳米Al₂O₃颗粒,通过粉末冶金法制备氧化铝铜（Cu-Al₂O₃）。采用X射线光电子能谱仪、扫描电子显微镜、洛氏硬度仪和涡流计分别测试了Cu-Al₂O₃的结合能、微观组织、硬度和导电率。结果表明：随Al₂O₃颗粒含量的增加,Cu-Al₂O₃的硬度先升高后降低,当Al₂O₃颗粒的质量分数达到0.084%时,Cu-Al₂O₃的硬度达到最大值75.73（HRB）。Cu-Al₂O₃的导电率随着Al₂O₃颗粒含量的增加逐渐下降。Al₂O₃颗粒的质量分数为0.084%时为最佳值,Cu-Al₂O₃的硬度达到最大值,导电率达到69.1% IACS。     

CeO2(111)表面的氧物种对Au的活化吸附

采用第一性原理的经过库仑力修正的密度泛函方法,研究了CeO_2(111)表面不同氧空穴附近形成的不同的活性O_2物种.在此基础上,研究这些O_2物种对Au原子的吸附能力,得到过氧O_2-2对Au吸附能为1.8eV,吸附较强;超氧O-2对Au的吸附能为0.4eV,吸附较弱.研究结果为Au/CeO_2催化CO氧化提供了重要理论思路.     

Fe_2O_3/TiO_2复合纳米管阵列的制备及其可见光催化性能研究

在氟化铵-乙二醇体系中,采用阳极氧化法在铁基体上制备Fe_2O_3纳米管阵列,然后以氟钛酸铵为钛源,利用水热法在Fe_2O_3纳米管阵列上负载TiO_2纳米片,制得Fe_2O_3/TiO_2复合纳米管阵列,利用SEM、EDS、XRD、TEM、UV-Vis等手段,对所制Fe_2O_3/TiO_2纳米管阵列的表面形貌、物相结构及光催化性能进行表征,并分析Fe_2O_3/TiO_2纳米结构对亚甲基蓝的可见光降解能力。结果表明,Fe_2O_3/TiO_2复合纳米管阵列具有良好的可见光响应;NH_4F浓度为0.4%、水热反应3h制备的Fe_2O_3/TiO_2复合结构具有最佳的光催化性能,对亚甲基蓝的降解率可达90%。     

Al2O3/WO3/ZrO2催化剂的制备及在酯交换反应中的研究

以松木为模板,采用模板法将不同含量的Al₂O₃添加到WO₃/ZrO₂复合氧化物中,采用X射线衍射、BET比表面积分析、拉曼光谱和NH₃等温吸附测试等手段对其进行表征,以评估其改进结果。将Al₂O₃/WO₃/ZrO₂催化剂应用到甲醇与乌桕油（非食用油）的酯交换反应中,在其他反应条件相同,Al₂O₃质量分数为3%时,生物柴油最高产率达到83.1%。结果表明：添加Al₂O₃稳定了ZrO₂的四方相结构,使得催化剂比表面积更大、孔数量增加;模板法制备的催化剂孔径分布均匀,WO₃呈高度分散无定型状态;引入Al₂O₃增加了WO₃/ZrO₂催化剂的中强酸性,对弱酸性和强酸性无明显改变。     

Y_2O_3/GeO_2/环氧树脂基辐射防护材料的制备及性能研究

用表面处理稀土氧化物Y_2O_3,GeO_2的方法制备了Y_2O_3/GeO_2/环氧树脂辐射防护材料.采用X射线衍射仪(XRD)研究了材料的微观结构;用多道γ谱仪测试并分析了材料的辐射防护能力.结果表明,制得的材料中的Y_2O_3和GeO_2粒子并未与环氧树脂发生键和反应,Y_2O_3与GeO_2粉末的加入明显提升了材料防护射线的效果.     

Effect of La2O3 on microstructure, mechanical and tribological properties of Ni-W coatings

In this paper, a Ni-W-La2O3 composite coating was prepared by the electrodeposition method. Microhardness tester and environmental scanning electron microscope equipped energy dispersive spectroscopy were employed to investigate the microhardness and the surface morphology of the composite coatings respectively, and the high temperature friction behavior and corrosion resistance of the coatings against molten glass were investigated by using a high temperature tribometer. The results show that La2O3 can refine the microstructure effectively, and make the element distribution uniform, which leads to the increase of average microhardness. La2O3 particulates can reduce the friction coefficient between the composite coating and glass during the sliding process at about 973 K largely, and the corrosion resistance of the La2O3 added Ni-W coatings is effectively improved compared with that of the non-added one, furthermore the mechanism of friction-reducing and anti-corrosion is also discussed.     

钴掺杂Mn3O4作为模板制备锂离子电池正极LiMn2O4

以水热合成的钴掺杂Mn₃O₄作为模板,通过固相反应制备尖晶石LiMn₂O₄。XRD谱图和SEM照片显示制备的LiMn₂O₄具有岩石状结构并呈现良好的结晶性,同时Co的引入能够引起LiMn₂O₄晶格的收缩。作为锂离子电池正极材料,Co含量的增加能够提高循环稳定性但降低材料放电比容量,3% Co掺杂的LiMn₂O₄在0.5 C的电流密度下,经过100次循环后,剩余放电比容量达101.6 mAh·g^-1;在10 C的电流密度下,放电比容量可维持在81.0 mAh·g^-1,优于未掺杂的LiMn₂O₄。这是由于Co的引入能够稳定LiMn₂O₄晶体结构并抑制循环中的姜-泰勒扭曲。     

Density functional theory study of the reaction paths of reactions of CH3C(O)O2 radicals with HO2 in the gas phase

A DFT study on the reactions between CH₃C(O)O₂ and HO₂ radicals has been carried out. It is suggested that both the triplet and singlet potential surfaces involve a complex mechanism with the formation of loosely bound intermediate complexes of reactants and products. The reaction prefers to occur on the triplet surface to produce peracetic acid (CH₃C(O)O₂H) and triplet O₂ molecule. The CH₃C(O)O₂H can further convert into CH₃C(O)O and HO radicals.     

Pu(H2O)53+和Pu(H2O)54+ 团簇的相对论密度泛函研究

用TPSSTPSS密度泛函方法, Pu离子和H₂O分子分别采用相对论有效原子实势(RECP)和6-31g基组, 研究了Pu(H₂O)₅³⁺和Pu(H₂O)₅⁴⁺ 团簇溶剂化和非溶剂化效应中的几何结构及紫外可见吸收光谱. 计算结果表明: 水溶剂环境对Pu(H₂O)₅³⁺及Pu(H₂O)₅⁴⁺ 团簇的几何结构影响都比较明显. NBO电荷分析表明水分子与钚离子之间没有直接的电荷转移. 所研究团簇的未配对电子都占据5f轨道. 在气相及水溶剂环境下, 所研究团簇的紫外可见吸收光谱存在较大差距. 主要的吸收峰大都源于f电子之间的跃迁.     

Density functional theory study of the reaction paths of reactions of CH3C(O)O2 radicals with HO2 in the gas phase

A DFT study on the reactions between CH₃C(O)O₂ and HO₂ radicals has been carried out. It is suggested that both the triplet and singlet potential surfaces involve a complex mechanism with the formation of loosely bound intermediate complexes of reactants and products. The reaction prefers to occur on the triplet surface to produce peracetic acid (CH₃C(O)O₂H) and triplet O₂ molecule. The CH₃C(O)O₂H can further convert into CH₃C(O)O and HO radicals.     

Nb_2O_5/CdS纳米粒子的制备及其光催化性能研究

通过简单的沉淀法合成了Nb2O5/Cd S纳米粒子,利用XRD、TEM、XPS对其进行了表征,采用制备的Nb2O5/Cd S纳米粒子在可见光照射下对罗丹明B进行了降解实验.结果表明:负载在Nb2O5表面上的Cd S粒径大小较均一,约为35 nm,在可见光照射下,Cd S质量比为20%的Nb2O5/Cd S纳米粒子光催化活性最佳,可见光照射下3 h对罗丹明B降解率为98%,经过3次循环利用,发现其具有良好的光催化稳定性.