芯丝预加张力对摩擦包芯纱强力的影响

纺制摩擦包芯纱是提高摩擦纱强力的一个有效手段。该文对摩擦包芯纱的加捻过程进行了动力学分析,获得了加捻过程中纱线转动速度n(x)和捻度T(x)的变化规律。以棉纤维为外包纤维,对涤纶、锦纶6及粘胶长丝等三种不同材料的芯丝对芯丝预加张力对摩擦包芯纱强力影响的问题进行了试验研究。利用理论研究的结果对试验规律进行了分析和解释。     

芯丝预加张力对摩擦包芯纱强力的影响

纺制摩擦包芯纱是提高摩擦纱强力的一个有效手段。该对摩擦包芯纱 加捻过程进行了动力学分析，获得了加捻过程中纱线转动速度n(x）和捻度T（x）的变化规律。以棉纤维为外包纤维，对涤纶、锦纶6及粘胶长丝等三种不同材料的芯丝对芯丝预加张力对摩擦包芯纱强力影响的问题进行了试验研究，利用理论研究的结果对试验规律进行了分析和解释。     

喷气纺技术及纱线的性能表征

在全面的分析喷气纺纱的发展现状和技术的基础上，介绍了喷气纱的芯纤维和包缠纤维结构。对喷气纱的性能从机械性能、条干、毛羽、捻度进行了测试分析。喷气纱伸长小、缩率低、条于均匀、纱疵少，3mm以上毛羽较环锭纱少，纱的表面光滑。芯纤维无捻度捻向、条于均匀、粗节少，重不匀小。虽成纱强力较低，但强力不匀率较环锭纱好，质量的综合评价较好。     

棉/涤纶长丝Sirofil复合纱成纱工艺性能研究

以低弹涤纶长丝和精梳纯棉粗纱为原料,纺制不同捻度、不同喂入间距、不同长丝预张力的Sirofil复合纱,并测试了纱线的强力、条干和毛羽.通过正交试验分析方法,得到实验范围内棉/涤纶长丝Sirofil复合纱的优化纺纱工艺参数为捻系数321,长丝须条间距6mm,长丝张力片重量3g.     

碳纳米管/涤纶包缠纱的制备与性能

在自行设计与搭建的包缠纱可控制备装置上,以碳纳米管(CNT)纱线为皮纱和涤纶(PET)长丝为芯纱包缠后分别得到不同捻度的CNT/PET包缠纱,并对包缠纱的形态结构、拉伸性能、电学性能以及应变传感性能进行了系统表征和分析.结果表明,碳纳米管纱线与涤纶长丝包缠后,不同捻度的包缠纱结构紧密均匀;随着捻度的增加,包缠纱的断裂伸长和断裂强力逐渐上升,捻度为2 500捻/m时,包缠纱的断裂伸长和断裂强力分别提高为CNT纱线的5倍和10倍左右.同时,当捻度为1 000~1 400捻/m时,包缠纱具有双传感系数特征:在拉伸的初始阶段,传感系数较低,约为0.50;当拉伸应变高于23%以后,传感系数急速上升至1.57左右,与碳纳米管纱线的传感系数(1.69)相当.当捻度高于1 400捻/m时,包缠纱的传感性能出现明显的波动.     

优化工艺减少赛络纺牛仔纱毛羽的探讨

探讨了由普通细纱机自行改造的赛络纺纱机减少牛仔纱毛羽的工艺条件.正交试验选取前区隔距、纱线捻度、后区牵伸、钢丝圈型号、锭速和喇叭双口隔距等6个工艺参数为考察因素,通过极差分析、回归分析、双因子交互作用效应分析,最终选定最优纺纱工艺为:喇叭双口隔距8 mm,锭速12 000 r/min,钢丝圈6903 9#,前区隔距45 mm,后区牵伸倍数1.10,捻度30捻/10cm;按照此最优工艺生产的纱线毛羽最少,平均每米纱线1 mm以上毛羽数为69.16根,3 mm以上毛羽数为0.52根.     

气流纱的拉伸特性研究

本文讨论气流纱的拉伸特性。Hearle曾对具有理想结构纱线的拉伸特性进行过比较完整的研究工作。本文则根据气流纱独特的成纱结构,对Hearle理论在气流纱中的应用作了一定的修正,并在此基础上对气流纱的拉伸特性作了分析计算。计算结果与实测结果基本相符。最后还从气流纱的应力-应变关系式中,就影响气流纱强力、初始模量以及断裂功等等力学特性的一些主要工艺参数进行了分析讨论。得出合理选用阻捻盘、很好控制捻度传递长度;合理设计与选用分梳及输棉机构,在不断改善单纤维供应的同时,尽量减少纤维损伤,提高纤维有效长度;适当提高纺纱张力,增加纤维转移等等都是改善气流纱强力等力学特性、提高成纱质量的有效途径。对工业用气流纱,还可通过合理设计凝棉槽,以提高气流纱紧密度的途径来提高气流纱强力。     

环锭细纱机动态捻度的试验研究

本试验工作是在棉纺环锭细纱机运转情况下,用高速闪光摄影的方法,对纱段(纺纱段、气圈段、卷绕段)捻度及其分布进行了比较系统细仔的实验研究。实验结果得出了各纱段在一落纱中捻度变化及其分布的规律、捻度传递的关系等作了分析,并通过锭速与钢丝圈对捻度影响的实验,予以论证。实验进一步证实:气圈段捻度大于卷绕段捻度,纺纱段捻度最小;在一落纱中,满纱时捻度最大,管底完成时大直径位置最小;在改变各工艺参数使捻度分布发生变化时,气圈形态对捻度的影响较张力的影响为大,因而应注意控制气圈形态偏小掌握。     

低捻转杯纺纱理论分析——阻扭件、阻扭矩及其捻度分布模型

转杯纺纱过程中断头的主要部位在成纱形成过程的一段,此段捻度小、强力低.如果为了扩大转杯纱的应用范围以及改善转杯纱的有关性能,纺制低捻度转杯纱,则断头率进一步提高,生头成功率进一步降低.这里研究在转杯纺加捻区中加装阻扭件后,讨论分析加捻区中纺纱张力的变化,进而构成阻扭件产生的阻扭矩以及形成阻扭件前后区域捻度分布的变化并建立捻度分布模型.理论分析结果表明,加装阻扭件后,成纱捻度不变,但提高了自由端成纱形成过程一段的捻度,这对降低断头率、提高生头成功率有利.     

涤/棉混纺股线拉伸力学性能与捻度关系的研究

对13.1tex设计捻度为85.6捻/10cm的涤/棉(65/35)混纺环锭纱,用退捻、加捻的方法获得5种不同捻度的单纱.对同一捻度的单纱合股后反向加捻成不同捻度的合股线,测量了合股线的断裂强力、伸长、初始模量,发现同一单纱捻度的涤/棉股线,随着合股捻度增加,其断裂比强度出现4个极大值,且其分布有一定的规律.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.