球面弯晶分析器研制

在激光聚变实验中为了获取等离子体的重要信息,采用球面弯曲晶体成像谱仪来研究等离子体辐射的X射线,利用球面弯晶对X射线进行诊断而提供时间、空间、光谱分辨。该强聚焦晶体能增强信噪比,提高谱仪的空间分辨能力及立体角收集辐射能力。实验结果表明球面弯晶分析器对波长范围为0.2~0.4 nm的X射线其分辨率可达600~1 000,聚光效率在同样距离条件下比平晶分析器高一个数量级以上,适合于研究等离子体X射线光谱学。     

超环面弯晶在X射线单色背光成像中的应用

基于Bragg衍射理论,分析了超环面晶体分析器实现等离子体在子午和弧矢2个方向等比例放大成像的原理,采用云母作为衍射晶体,研制了对激光等离子体进行二维成像的超环面晶体分析器,其子午和弧矢曲率半径分别为290 mm和196 mm,用于衍射成像时的Bragg角度为54°.采用铬靶X射线源辐照金属网格目标,网格的网孔尺寸为200 μm×200 μm,通过超环面晶体分析器对铬靶Kα谱线的衍射,在X射线IP板上得到了网格的二维背光衍射图像,并与球面晶体分析器成像效果进行了对比.实验结果表明,与球面晶体分析器相比,超环面晶体分析器可实现在子午和弧矢2个方向等放大比的X射线背光成像,且分析器具有较高的空间分辨力,当光源尺寸为500 μm,成像放大倍数为1.86倍时,其空间分辨力达到67 μm.     

合肥光源X射线成像光束线和实验站设计

在X射线成像光束线光学系统的设计基础上,对光束线的能量分辨率和光子通量进行了计算,并对双晶单色器第一块晶体的热载影响进行了模拟分析,同时利用波带片成像技术对实验站进行了设计,达到了60 nm的空间分辨率.结果表明光束线和实验站的设计能够满足X射线成像实验所需条件的要求.     

Schmidt和Angel结构的龙虾眼X射线成像系统性能对比研究

Schmidt型和Angel型的X射线成像系统通过仿生龙虾眼睛微通道结构实现全反射聚焦成像,相比传统的X射线成像方式,具有大视场、高空间分辨率和能量获取能力。研究两个龙虾眼基础结构模型,根据X射线掠入射反射理论,分析对比了Angel和Schmidt结构光线入射焦面时的分布和空间分辨率,并用tracepro软件建立模型仿真验证了两种结构龙虾眼在聚焦和成像时的接收光/发射光、最大值/十字臂、最大值/本底、十字臂/本底多个性能参数。理论分析和仿真结果表明,当龙虾眼透镜焦距较长和通道长宽比大约为50时,由于多次反射时的聚焦及成像,Schmidt模型比Angel模型的信噪比等主要参数高,空间分辨率低;当龙虾眼透镜焦距较短和通道长宽比大约为10时,由于单次反射时的聚焦及成像,Schmidt模型比Angel模型的信噪比等主要参数低,空间分辨率几乎一样。     

等电子谱线法诊断等离子体电子温度实验研究

在"星光Ⅱ”激光装置上对Mg/Al混合材料平面靶和Mg/Al示踪层金盘靶进行三倍频激光打靶实验,用平面晶体谱仪测量靶材料发射的X光光谱,获取了示踪离子谱线实验数据.采用多组态Dirac-Fock方法计算所需原子参数,并在局域热动平衡条件下建立了双示踪离子谱线强度比随电子温度变化关系.在此基础上由双示踪元素等电子谱线法确定了Mg/Al混合材料平面靶及金盘靶激光等离子体的电子温度.     

一种新型的椭圆弯晶谱仪及其应用

研制了一种新型的诊断0.2～2nm的激光等离子体X射线的聚焦型椭圆弯晶谱仪,根据椭圆光学自聚焦原理给出了弯晶谱仪的结构设计方案,创造性的提出了利用激光测距仪完成瞄准和测距两个功能的瞄准对中关键技术.通过在上海"神光Ⅱ"靶室上的装调及打靶实验,利用X-CCD成功的获取了谱线的图像,数据分析的结果证明实测谱线波长与理论值吻合.     

文物高光谱数据采集及其多尺度多支路融合增强方法

随着光学成像技术的发展,越来越多的成像技术应用于文物保护分析领域。其中,高光谱成像以其无损、非接触以及"图谱合一"的特点受到广泛关注。然而,受成像传感器的物理限制,现有高光谱图像空间分辨率远不及RGB三通道的高清数码相机,极大阻碍了文物高光谱数字化的应用。针对此问题,该文首先设计了一套文物高光谱数字化采集流程,便于规范化采集同一场景的RGB和高光谱图像数据,为后续融合增强带来便利。其次,提出了基于多尺度多支路的RGB和高光谱图像融合方法,通过设计空间光谱融合模块和细化模块,获取具有高空间和高光谱分辨率的数字化影像。实验结果表明,无论从主观视觉还是客观指标,提出的方法在保持光谱分辨率的同时,更好地提高了空间分辨率。     

神光装置上X射线时空诊断技术概况与展望

在激光惯性约束聚变(Inertial Confinement Fusion,ICF)实验研究中,对X射线的产生和演化过程的诊断和对物理实验参量调控以及模拟程序的校验起着至关重要的作用.针对激光聚变产生的X射线在时间、空间和能谱方面的特点,结合当前物理实验对诊断技术的特殊要求,分别研发了以时间分辨、空间分辨和谱分辨为优势的X射线成像诊断设备.随着我国ICF实验研究的不断深入,国内X射线成像诊断设备的诊断能力得到了大幅度提升,某些自主提出的新概念诊断设备的技术性能甚至优于国外同类型诊断设备.     

微束X射线荧光分析谱仪及其对松针中元素的分布分析

介绍了一种小型的微束X射线荧光分析谱仪,它是由导管X光透镜和能量色散X射线荧光分析谱仪组成.谱仪具有较高的空间分辨率和能量分辨率.使用本谱仪对松树针叶进行了微区分析,得出各种元素沿松针长度方向和横切面径向的分布规律.结果表明使用X光透镜的微束X射线荧光分析方法可以实现植物样品的微区分析,有助于进一步了解植物的生长与元素迁移的关系.     

神舟八号飞船空间蛋白质结晶实验

 利用德国空间生物实验装置和自主研制的结晶室,在中国神舟八号飞船上进行了14种蛋白质的结晶实验,实验持续16.5d;同时使用相同结晶室在地面开展比对实验.结果表明：12种蛋白质在空间析出晶体,地面有11种;空间析出的6种蛋白质晶体可用于X-射线衍射实验,收得4种晶体的8套同步辐射衍射数据;地面有5种蛋白质晶体可用于X-射线衍射,收得3种晶体的5套同步辐射衍射数据,其中1套不完整.鸡蛋清溶菌酶空间晶体的初步衍射最高分辨率为1.16Å,地面晶体的为1.23Å.痢疾杆菌二磷酸四腺苷空间晶体初步衍射最高分辨率为1.75Å,地面晶体的为1.49Å,但是1颗空间晶体的晶型发生改变.衣原体蛋白酶样活化因子空间晶体的初步衍射最高分辨率为2.31Å,地面晶体未得到衍射数据.加拿大的17β-羟化类固醇脱氢酶复合物空间晶体的初步衍射最高分辨率为2.30Å,地面晶体未得到完整衍射数据.自主研制的结晶室的浸入式毛细管结构为国际上首次采用,具有无源和通用的优点,对汽相扩散结晶法具有良好的自然对流抑制效果.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.     

Tracking data management using topology of moving object database system for moving object constrained trajectory in LBS application

Advances in wireless technologies and positioning technologies and spread of wireless devices, an interest in LBS (Location Based Service) is arising. To provide location based service, tracking data should have been stored in moving object database management system (called MODBMS) with proper policies and managed efficiently. So the methods which acquire the location information at regular time intervals then, store and manage have been studied. In this paper, we suggest tracking data management techniques using topology that is corresponding to the moving path of moving object. In our techniques, we update the MODBMS when moving object arrived at a street intersection or a curved road which is represented as the node in topology and predict the location at past and future with attribute of topology and linear function. In this technique, location data that are corresponding to the node in topology are stored, thus reduce the number of update and amount of data. Also in case predicting the location,because topology are used as well as existing location information, accuracy for prediction is increased than applying linear function or spline function.