乙烯气相聚合高效催化剂的组成和聚合反应

研究了２种类型的乙烯气相聚合高活性催花剂．用ＳｉＯ２,ＭｇＣｌ２作复合载体,负载ＴｉＣｌ４制得的ＳＭ型催化剂,载体中含ｗ（Ｔｉ）为２％～３％,ｗ（Ｔｉ３＋）为３５％～５９％,比表面积１０５～１２０ｍ２／ｇ,催化活性每小时每克催化剂Ｔｉ催化得５．０～５．７ｋｇ产物ＰＥ（ｋｇ·ｇ－１·ｈ－１）,聚合动力学曲线为衰减型．用镁粉、卤代烷、四氯化钛为主要组分制备的ＭＧ－２型催化剂,载体中ｗ（Ｔｉ）为６％～７％,ｗ（Ｔｉ３＋）为５５％～６９％,比表面积７０～８５ｍ２／ｇ,催化活性１．８～２．０ｋｇ·ｇ－１·ｈ－１,聚合动力学曲线为平稳型．对ＳＭ型催化剂扫描电镜及图象分析得到颗粒平均粒径（ｄ）,颗粒长短轴比（ｄｌ／ｄｓ）及颗粒大小粒径比（ｄｍａｘ／ｄｍｉｎ）分别为３１μｍ,１．４０２,４．１,ＭＧ－２型催化剂为３３μｍ,１．５２４,７．０,相应聚合产物颗粒的ｄ,ｄｌ／ｄｓ,ｄｍａｘ／ｄｍｉｎ,ＳＭ型催化剂为２４７μｍ,１．２９５,４．６,ＭＧ－２型催化剂为２６３μｍ,１．５４０,９．０．显示出ＳＭ催化剂更优良的聚合性能．     

过渡塑性相工艺制造Ti-B-C复合陶瓷材料

给出了以ＴｉＨ２和Ｂ４Ｃ为原料通过过渡塑性相工艺（ｔｒａｎｓｉｅｎｔｐｌａｓｔｉｃｐｈａｓｅｐｒｏｃｅｓｓｉｎｇ）制备Ｔｉ－Ｂ－Ｃ复合陶瓷材料的方法。同时进行了ＴｉＨ２－Ｂ４Ｃ体系和Ｔｉ－Ｂ４Ｃ体系的对比实验，结果表明，ＴｉＨ２在８００℃以下分解获得高性能的Ｔｉ粉和Ｂ４Ｃ发生了如下反应：（３＋ｘ）Ｔｉ＋Ｂ４Ｃ→２ＴｉＢ２＋（１＋ｘ）ＴｉＣ１１＋ｘ（０≤ｘ≤１）。在相同条件下以ＴｉＨ２作为过渡塑性相的ＴｉＨ２－Ｂ４Ｃ体系比Ｔｉ－Ｂ４Ｃ体系具有优越的烧结性能，在１６００℃时热压烧结４ｈ可以获得高性能的ＴｉＢ２－ＴｉＣｘ复合陶瓷材料（断裂韧性为７．７ＧＰａｍ１／２，抗弯强度为７６５ＭＰａ）。还利用Ｘ衍射和扫描电镜对这种材料的显微结构进行了研究。     

中药路路通化学成分的研究（Ⅰ）——一种新的五环三萜的结构测定

从生药路路通分离得到２个齐墩果烷骨架的五环三萜类化合物．通过１３ＣＮＭＲ，ＤＥＰＴ，１ＨＮＭＲ，２Ｄ１Ｈ－１３ＣＣＯＳＹ，２Ｄ１Ｈ－１ＨＣＯＳＹ，ＩＲ，ＭＳ和元素分析阐明了它们的结构．（１）为２α，３β－二羟基－２３－去甲－齐墩果－４（２４），１２（１３）－二烯－２８－羧酸，（２）为２α，３β，２３－三羟基齐墩果－１２（１３）－烯－２８－羧酸，（１）未见文献报道，（２）是首次从这一植物中分离得到     

中药路路通化学成分的研究（I）：一种新的五环三萜的结构测定

从生药路路通分离得到２个齐墩果烷骨架的五环三萜类化合物。通过＾１３Ｃ ＮＭＲ，ＤＥＰＴ，＾１Ｈ ＮＭＲ，２Ｄ＾１Ｈ－＾１３Ｃ ＣＯＳＹ，２Ｄ＾１Ｈ－＾１Ｈ ＣＯＳＹ，ＩＲ，ＭＳ和元素分析阐明了它们的结构。（１）为２α，３β－二羟基－２３－去甲－齐墩果－４（２４），１２（１３）－二烯－２８－羧酸，（２）为２α，３β，２３－三羟基齐墩果－１２（１３）－烯－２８－羧酸，（１）未见献报道，（２）是首次从     

Cu—Mn—Pt／γ—Al2O3系列催化剂中组分间的活性增强效应

通过ＣＯ氧化活性测试，采用ＸＲＤ、ＸＰＳ、ＴＰＲ等方法表征，研究了Ｃｕ－Ｍｎ－Ｐｔ／γ－Ａｌ２Ｏ３系列催化剂中组分间的活性增强效应，并对其固相结构和表面组成进行表征．结果表明：（１）氧化型ＣｕＭｎ／γ－Ａｌ２Ｏ３催化剂中Ｃｕ和Ｍｎ之间存在一定的活性增强效应，两种活性组分发生协同作用；（２）还原型Ｐｔ－Ｃｕ／γ－Ａｌ２Ｏ３和Ｐｔ－Ｍｎ／γ－Ａｌ２Ｏ３催化剂的氧化活性在系列中最高，Ｐｔ－Ｍｎ／γ－Ａｌ２Ｏ３的ＣＯ氧化活性增强效应最为显著．这与加人Ｐｔ后，Ｃｕ２＋易被还原，Ｃｕ＋明显增多有关；（３）同时含有Ｃｕ、Ｍｎ组分的几种催化剂中，催化剂表面上Ｃｕ均有一定富集，加人Ｐｔ后，表相以Ｃｕ＋为主．由于Ｃｕ－Ｍｎ－Ｐｔ三元催化剂的制备方法不同，以致氧化活性相差很大，共浸制备较分浸制备的催化剂活性要好的多．     

用离子熔盐法制备光催化剂MTiO3（M=Mg,Ca,Sr,Ba）

利用离子熔盐法合成了ＭＴｉＯ３型复合氧化物，合成温度范围为７００－１１００℃，反应时间为４ｈ或６ｈ，熔剂剂为Ｎａ２ＣＯ３－ＫＣｌ温合物，讨论了合成条件对ＣａＴｉＯ３光催化活性的影响。     

丙烯酸乙酯──醋酸乙烯酯与玉米淀粉的乳液共接枝聚合反应

本文以过硫酸钾与硫代硫酸钠组成ＫＰＳ—Ｎａ２Ｓ２Ｏ３氧化还原ｚ引发体系，首次研究了丙烯酸乙酯（ＥＡ）一醋酸乙烯酯（ＶＡＣ）与玉米淀粉的乳液共接枝反应规律，ＩＲ、ＳＥＭ表征了产物的结构．当［ＫＰＳ］＝６×１０－３Ｍ，［ＶＡＣ］＝１．５×１０－１Ｍ，［ＥＡ］＝２×１０－２Ｍ，Ｓ：Ｌ＝４：１００，ＣＥ＝０．６ｇ／１００ｍｌ，６０℃，反应６ｈ时，可以得到最佳的Ｇ％及Ｅ％值，文献中未见有与本文相同的报道．     

1，1′─［四甲基二硅撑］双（环戊二烯基三羰基钨配合物）的合成及反应

１，２－二环戊二烯基四甲基二硅烷与丁基锂作用生成［四甲基二硅撑］双（环戊二烯基负离子盐），后者随即与六羰基钨反应形成１，１－［四甲基二硅撑］双［环戊二烯基三羰基钨负离子盐］，（Ｍｅ２ＳｉＳｉＭｅ２）·［Ｃｐ′（ＣＯ）３Ｗ－］２·２Ｌｉ＋（Ｉ）．（Ｉ）分别与六种卤化物反应，生成在钨原子上引入取代基的产物：（Ｍｅ２ＳｉＳｉＭｅ２）．［Ｃｐ′Ｗ（ＣＯ）３Ｒ］２，（Ｒ：Ｍｅ，Ｃ２Ｈ５，２；ＰｈＣＨ２，３；ＣＨ２ＣＯＯＣ２Ｈ５，４；ＣＨ３ＣＯ，５；Ｐ３ｈＳｎ，６）．（Ｉ）用醋酸处理后，随即分别与ＣＣｌ４，ＮＢＳ及Ｉ２作用，生成相应的钨卤化物，（Ｍｅ２ＳｉＳｉＭｅ２）［Ｃｐ′Ｗ（ＣＯ）３Ｘ］２，（Ｘ：Ｃ１，８；Ｂｒ，９；Ｉ，１０），（Ｉ）与Ｆｅ３＋／Ｈ３Ｏ＋作用发生氧化偶联，生成双核Ｗ－Ｗ键产物（Ｍｅ２ＳｉＳｉＭｅ２）［Ｃｐ′Ｗ（ＣＯ）３］２，１１．（Ｃｐ′＝Ｃ５Ｈ４）     

复合型纳滤膜的制备及表征

在聚砜基膜上用界面聚合法制备了两种复合型纳滤膜ＰＡ０１和ＰＡ０２。在０．３ＭＰａ下,ＰＡ０１膜对ＭｇＳＯ４溶液和ＦｅＣｌ３溶液的脱直 ９６．０％和７８．０％,水通量分别为８．５（Ｌ．ｍ＾－２．ｈ＾－１）和７．９（Ｌ．ｍ＾－２．ｈ＾－１）;ＰＡ０２膜对ＭｇＳＯ４ｉｐｗｋｉｙｗ （２．０ｇ．Ｌ＾－１）和ＣａＣｌ溶液（０．５ｇ．Ｌ＾－１）的脱盐率分别为９８．０％和８８．８％,水通量分别为１．０（Ｌ。ｍ＾     

Sol-gel法合成Bi_(1.6)Pb_(0.3)Sb_(0.1)Sr_2Ca_2Cu_3O_x体系的超导材料的研究

本文用Ｓｏｌ－ｇｅｌ法合成了Ｂｉ１．６Ｐｂ０．３Ｓｂ０．１Ｓｒ２Ｃａ２Ｃｕ３Ｏｘ体系的高ＴＣ超导原粉，对于不同的烧结时间，材料的超导性有不同程度的差异，（超导转变温度为１０８．３～１１６．１Ｋ）并与同种方法合成的Ｂｉ１．７Ｐｂ０．３Ｓｒ２Ｃａ２Ｃｕ３Ｏｘ体系进行了比较．用Ｓｏｌ－ｇｅｌ法，在Ｂｉ系中掺杂Ｐｂ，同样会缩短烧结时间（缩短６０ｈ），促进高温相的形成，同时掺杂Ｐｂ，Ｓｂ，形成超导材料所需的烧结时间进一步缩短（缩短１５３ｈ）．利用ＳＥＭ和Ｘ－ｒａｙ观察和分析了样品的形貌特征和物相结构．Ｓｏｌ－ｇｅｌ法具有工艺简单，烧结时间短，样品颗粒均匀、粒度小、组分易控等优点，在高ＴＣ超导材料中不失为一种行之有效的材料制备工艺．     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.