植酸酶液体发酵条件及酶学性质的研究

植酸酶产生菌黑曲霉 90 3(Aspergillusniger)的最适产酶条件 :初始pH5 .0～ 6 .5 ,温度2 9± 1℃ ,培养时间 4d ,2 5 0ml三角瓶发酵液的装量为 5 0ml,一定量的Fe2 +和Mn2 +对产酶有促进作用 ;酶的最适作用pH为 5 .5～ 6 .0 ,最适作用温度为 37℃ ,该酶在 pH3.0～ 7.0 ,温度 30～ 5 0℃时稳定性较好。     

光合细菌中氢化酶的分离纯化及其性质研究

以光合细菌为出发菌株,离心得到的菌体经超声破碎后,得到的粗酶液经硫酸铵沉淀、透析、DEAE-52离子交换层析和Sephadex G-200分子筛凝胶层析分离纯化获得电泳纯的氢化酶,且该酶的分子量为62.0 ku和37.0 ku的两个亚基组成的分子量为99.0ku的二聚体,对该酶进行酶学性质的研究得到酶催化最适温度和pH值范围分别为30℃和pH=7.5,且在25～35℃和pH=7.0～8.0范围内催化放氢活力较稳定.     

硫酸盐还原菌氢化酶的分离纯化及酶学性质研究

硫酸盐还原菌氢化酶上清液经硫酸铵沉淀、透析、DEAE 52阴离子交换层析和Sephadex G-150凝胶过滤层析纯化出氢化酶,纯化倍数为34.7,酶回收率为34.1%.对纯化酶性质进行研究,结果表明:该酶是由分子量为46KD和34KD的两个亚基构成的总分子量为80KD的αβ异二聚体;酶催化最适温度和pH值范围分别为45℃和6.5～8.5,在34~55℃和pH=6～9.2范围内具有较稳定的催化放氢活力;光谱扫描分析和激活剂及抑制剂测定表明该酶属含铁硫中心的唯铁氢化酶.     

修饰性载体固定化漆酶

采用壳聚糖铜固定化和交联酶聚集体的方法固定化漆酶.探索了固定化前后漆酶的最适温度、pH,热稳定性和金属离子对其活性的影响,交联漆酶聚集体制备的条件.结果为:游离漆酶的最适温度是20℃,最适pH是4.6;壳聚糖铜固定化漆酶的最适温度是25℃,最适pH是4.0;交联漆酶聚集体的最适温度是15℃,最适pH是3.6.固定化后漆酶的热稳定性提高,不同金属离子影响固定化漆酶的活性,其中K+的激活作用尤为明显.制备交联漆酶聚集体最适戊二醛浓度为1%,最适交联时间是2 h.     

鸡腿菇漆酶基本酶学性质研究

本文研究了鸡腿菇漆酶基本酶学性质,研究表明：鸡腿菇漆酶粗酶液最适温度是60℃。在高于60℃以上的高温水浴一小时以上酶活才会明显下降;最适反应的pH值在6．0～7．0的范围内,pH值4～7的范围内变化不大。     

镰孢菌属Q7-31菌株产耐碱性木聚糖酶的酶学性质

对镰孢菌属Q7-31菌株所产木聚糖酶的粗酶液和部分纯化后的酶液进行了酶学性质比较试验。其粗酶液的最适反应pH为6.0,温度50℃;稳定范围:pH6.0,温度30℃。粗酶液经部分纯化后酶液的最适反应pH5.0～6.0,温度为40～50℃;稳定范围:pH5.0～6.0,温度30～40℃。纯化后酶液的酶学性质明显优于粗酶液。     

萝卜过氧化物酶的稳定性研究

本文研究了在不同pH、温度条件下,从萝卜中提取的过氧化物酶的稳定性.结果表明,萝卜过氧化物酶具有较好的热稳定性和较好的pH值稳定性,其作用最适pH值为4.8,最适温度为60℃.     

固定化乙酰胆碱脂酶的研究

以戊二醛为交联剂,将乙酰胆碱脂酶交联固定到硅胶载体上,研究了影响固定化酶的主要因素．通过酶活力的测定,确定了最佳戊二醛浓度、pH值、固定化时间、酶用量、固定化酶的最适作用温度、pH值、酶的稳定性及其回收率．结果表明：戊二醛浓度为0．5％,pH值为8．0,固定3．0h,酶与载体比例为30mg／g可制备良好的功能化载体．固定化乙酰胆碱脂酶最适作用温度和pH范围分别为40℃和6．0～9．0．重复使用10次固定化酶,回收率约为70％．     

漏斗状侧耳纤维素酶高活性变株的选育与产酶条件和酶特性研究

以漏斗状侧耳5·01为出发菌株,用NTG和UV依次对孢子、单核菌丝和双核菌丝进行处理,获得了微晶纤维素酶活和羧甲基纤维素酶活分别是出发菌株2.86倍和2.51倍的突变株HCA15。正交试验结果表明:该变株在含有棉籽壳粉、尿素、麸皮、纤维二糖的培养基中酶活高。产酶的最适pH为5.6,最适温度为28℃。酶作用的最适pH为4.6,最适温度为40℃。酶在pH5.0时最稳定,在50℃以上不稳定。     

双孢蘑菇子实体超氧化物歧化酶(SOD)的分离纯化及部分性质

采用硫酸铵分级盐析、DEAE-Cellulose-52离子交换柱层析、Sephadex G-150分子筛柱层析分离纯化了双孢蘑菇(Agaricus bisporus)子实体超氧化物歧化酶.纯化了31倍,回收率为10.51%,纯酶比活力为5 512.6 u/mg,酶的最适作用温度为25 ℃,最适pH值为8.0,酶在25 ℃以下比较稳定,亚基分子质量为21 kD,全酶分子质量为43 kD, 该酶由2个相同的亚基组成.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.     

Tracking data management using topology of moving object database system for moving object constrained trajectory in LBS application

Advances in wireless technologies and positioning technologies and spread of wireless devices, an interest in LBS (Location Based Service) is arising. To provide location based service, tracking data should have been stored in moving object database management system (called MODBMS) with proper policies and managed efficiently. So the methods which acquire the location information at regular time intervals then, store and manage have been studied. In this paper, we suggest tracking data management techniques using topology that is corresponding to the moving path of moving object. In our techniques, we update the MODBMS when moving object arrived at a street intersection or a curved road which is represented as the node in topology and predict the location at past and future with attribute of topology and linear function. In this technique, location data that are corresponding to the node in topology are stored, thus reduce the number of update and amount of data. Also in case predicting the location,because topology are used as well as existing location information, accuracy for prediction is increased than applying linear function or spline function.