从黑曲霉发酵的果胶粗酶中分离纯化内切聚半乳糖醛酸酶

使用硫酸铵分级沉淀、CM -SephadexC - 5 0弱阳离子、POROSPE疏水层析和POROSHQ2 0强阴离子交换分离技术 ,从黑曲酶发酵的果胶酶粗品中纯化出一种电泳纯的果胶酶 .经SDS -PAGE电泳测定其相对分子量约 41.8kD ,最适pH和最适温度分别为 5 .0和 36℃ .     

支链淀粉酶产生菌的筛选及发酵条件的研究

从淀粉加工厂附近的土壤中分离出一株产耐热、嗜碱性支链淀粉酶的菌株 ,初步鉴定为嗜碱芽孢杆菌 SX- 12 .优化后的最佳发酵培养基为 :可溶性淀粉 3.0 g,蛋白胨 1.0 g,酵母膏 0 .5 g,K2 HPO4 0 .2 g,Mg SO4 · 7H2 O 0 .0 5 g,最适 p H 8.5 ,最适温度 4 0℃ .酶活从最初的 2 .4 u/ m L提高到 4 .6 2 u/ m L .酶的最适 p H 9.0 ,最适温度 5 5℃ .Ca2 + ,Mn2 + ,Mg2 + 等离子是酶的激活剂 ,Zn2 + ,Hg2 + 等离子是抑制剂 .     

植酸酶液体发酵条件及酶学性质的研究

植酸酶产生菌黑曲霉 90 3(Aspergillusniger)的最适产酶条件 :初始pH5 .0～ 6 .5 ,温度2 9± 1℃ ,培养时间 4d ,2 5 0ml三角瓶发酵液的装量为 5 0ml,一定量的Fe2 +和Mn2 +对产酶有促进作用 ;酶的最适作用pH为 5 .5～ 6 .0 ,最适作用温度为 37℃ ,该酶在 pH3.0～ 7.0 ,温度 30～ 5 0℃时稳定性较好。     

一种改进的漆酶酶活检测方法

以 2 ,2′ -连氮 -双 (3-乙基苯并噻唑 - 6 -磺酸铵 ) (简称ABTS)为漆酶A、B的底物 ,采用UV - 2 2 0 1型紫外 -可见分光光度计连续记录酶反应在 2 5℃ ,4 2 0nm波长下的时间历程曲线 ,并求取最初部分的斜率以计算漆酶酶活的方法 .该方法直观、方便、准确且可靠 .在 2 5℃的 0 .0 4mol/LBritton Robinson缓冲溶液中 ,漆酶A、B的最适 pH值分别为 4 .0和 4 .5 .在 2 5℃最适 pH值的Britton Robinson缓冲液中 ,由双倒数作图法求得漆酶A、B的米氏常数Km 分别是 6 .6 4× 1 0 - 5mol/L和 2 .2 1× 1 0 - 5mol/L ,漆酶A、B的最大米氏反应速度Vmax分别是 1 4 2 5μmol.M (L·min)和 32 5μmol.M (L·min) .漆酶A、B的酶活分别为 2 2 99μmol·min- 1·L- 1和 1 1 4 8μmol·min- 1·L- 1.     

野生革耳菌组成型漆酶的生成条件及性质研究

首次发现野生革耳菌 (Panusrudis)在 39℃液体振荡培养条件下 ,不需诱导剂的诱导 ,能持续产生漆酶 .优化后培养基的碳氮源分别为 2 %蔗糖和 2 6mM酵母抽提物 ,最高酶活达 1 .6× 1 0 4U/L ,属于目前已知的组成型漆酶高产菌株 .发酵液经硫酸铵沉淀 ,DEAE Sepharose ,SephacrylS 2 0 0 ,MonoQ柱层析分离纯化后 ,可得电泳纯漆酶蛋白 .该酶为单体蛋白 ,分子量为 58kDa .以愈创木酚为底物 ,该酶的最适作用pH为4 5,最适反应温度为 50℃ ,Km值为 0 .2 1mM ,并表现出较好的热稳定性 ,具有良好的基础研究和工业应用价值     

宇佐美曲霉Y—26纤维素酶的纯化及酶学性质

从宇佐美曲霉 (A .usamii)固态发酵物中提取纤维素酶。粗酶液经硫酸铵盐析除去大量杂蛋白 ,然后通过 2次SephadexG - 2 0 0柱层析纤维素酶中CMC酶 ,提纯倍数可达 5 72。酶学研究表明 ,纤维素酶中CMC酶最适作用温度为 6 0℃ ,最适作用pH为 4.0 ,30～ 6 0℃区间酶活力较稳定 ,在pH为 3 .0～ 5 .0范围内 ,5 0℃保温 30min ,能保持 90 %的酶活力。红外光谱分析表明 ,纤维素酶在O—H ,N—H ,C—H ,CO有吸收带。CMC酶的Km、vmax 值分别为 0 10 g/ml、0 40mg/(ml·min)。     

聚甲基丙烯酸缩水甘油酯固定化青霉素酰化酶性质的研究

应用反相悬浮技术合成了珠状甲基丙烯酸缩水甘油酯 - N ,N′-亚甲基双 (丙烯酰胺 )共聚物 ,并将巨大芽孢杆菌 ( Bacillus megaterium)青霉素酰化酶共价偶联到甲基丙烯酸缩水甘油酯共聚物载体上 ,制成固定化青霉素酰化酶 ,其表观活性为 3 71 U/g(干重 ) ,水解青霉素 G钾盐的最适温度为 47°C,最适 p H为 8.5 ,在 p H4.5～ 9.0 ,温度 40°C以下时酶的活性稳定 ,表观米氏常数 Km为 1 .3 3× 1 0 -2 mol/L ,最大反应速度 vmax为 1 .2 7× 1 0 -5mol/min,固定化酶在 4°C冰箱保存 3 5 d,再水解 w=0 .0 2的青霉素 G钾盐溶液 ,重复使用 3 0次 ,保留酶活性 88.1 %。     

麦芽根中5′-磷酸二酯酶的分离提纯及其固定化

从麦芽根中分离得到了5’-磷酸二酯酶,采用戊二醛为交联剂,将该酶固定到壳聚糖上,用于酵母RNA的催化水解,以制备5’-核苷酸．研究了酶固定化反应的影响因素,在最适条件下,酶活回收率可达53．6％．进一步研究了固定化5’-磷酸二酯酶的酶学性质,测得固定化酶的米氏常数‰为15．38mg／mL（以RNA为底物）,固定化酶催化水解RNA的最适温度75℃,最适pH值为5．5,实验发现固定化5’-磷酸二酯酶具有更好的耐热性和更高的纯度．     

纤维素酶固定化研究

利用固态发酵法从瑞氏木霉QM9414发酵液中提取纤维素粗酶液,然后将其固定在壳聚糖上,测定粗酶液的酶活力,固定化酶与粗酶的最适pH,最适温度和Km值.结果表明,粗酶液的蛋白质含量为33.33 ug/mL,酶活力为120 IU/mL.固定化酶的最适温度为60℃而粗酶液为50℃,粗酶液的最适pH=5,固定化酶的最适pH=4,固定化酶的Km值3.592 01×10-2,粗酶液的Km值为4.076 04×10-2,表明固定化酶的很多性质均优于游离酶液.     

鸡肉蛋白水解液的研究

用酶水解鸡肉 ,通过单因素实验确定胰蛋白酶 1、中性蛋白酶、木瓜蛋白酶、酸性蛋白酶、碱性蛋白酶、胰酶 2、胃蛋白酶水解鸡肉的最适条件 ,并确定在它们的最适条件下 ,胰蛋白酶和木瓜蛋白酶是单酶水解较好的酶。在双酶水解中 ,发现胰蛋白酶 1与酸性蛋白酶在各自最适条件下组合水解鸡肉水解率最高 ,进一步确定双酶水解的条件为胰蛋白酶先在 5 0℃ ,p H8.5 ,加酶量 40 0 0 U/ g蛋白质 ,固液比 1∶ 4,水解 3h,后酸性蛋白酶在 45℃ ,p H2 .5 ,加酶量 40 0 0 U/ g蛋白质水解 2 h。在这种组合下酶解 ,水解产物的水解度为 40 .5 % ,蛋白回收率为 81.0 %     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.