MCM-48介孔分子筛的合成研究

本文以正硅酸乙酯(TEOS)为硅源,以十六烷基三甲基溴化胺(CTAB)为模板剂,用传统的水热合成法合成介孔分子筛MCM-48,探索模板剂、水、氢氧化钠等不同因素对合成MCM-48介孔分子筛的影响。在较低模板剂用量的条件下,合成了介孔分子筛,用XRD对MCM-48介孔分子筛进行了结构表征。     

气相水解法介孔分子筛MCM-41组装纳米TiO2研究

以水玻璃为硅源,表面活性剂十六烷基三甲基溴化铵为结构模板剂,合成出MCM-41介孔分子筛,并以钛酸丁酯为前驱体,在高温气相炉中进行水解,羟基缩合对介孔分子筛MCM-41进行了纳米TiO2的修饰。XRD、FTIR、N2吸附脱附、SEM表征手段对其结构特征的测试结果表明:纳米TiO2不仅进入介孔分子筛MCM-41介孔孔道,较均匀地修饰了介孔分子筛MCM-41的孔壁,而且使介孔分子筛MCM-41能够保持有序的孔道结构。     

介孔分子筛MCM-41的水热合成及形貌分析

以正硅酸乙酯（TEOS）为硅源,以十六烷基三甲基溴化胺（CTAB）为模板剂,水热法合成介孔分子筛MCM-41,并进行了XRD和SEM测定,探索了模板剂、氢氧化钠、水、晶化时间等不同反应因素对介孔分子筛MCM-41合成的影响,结果表明：CTAB/TEOS为0.6,H2O/TEOS为100,NaOH/TEOS为0.24,晶化时间为72 h为最佳反应条件;扫描电镜测试表明样品颗粒呈短球棒层状堆积,平均粒径在0.1μm左右,且分布较均匀.     

新型功能化介孔材料CH3-MCM-41-NH2的合成和表征

以硅酸钠为硅源,十六烷基三甲基溴化铵（CTAB）为模板剂,合成介孔材料MCM-41．采用两步嫁接法,分别用三甲基氯化硅（TMSCL）和3-氨基三乙氧基硅烷（APTS）对合成的介孔分子筛进行化学修饰,首次将甲基和氨基同时嫁接到介孔材料MCM-41上,得到新型的介孔材料CH3-MCM-41-NH2．利用XRD和FT—IR对合成的新型功能化介孔材料进行表征．     

以混合非离子-阳离子表面活性剂为模板剂合成MCM-48介孔分子筛

本文以混合非离子-阳离子表面活性剂为模板剂,研究了模板剂利用量、晶化温度、晶化时间以及辅助模板剂TX-100用量等条件下对合成MCM-48介分子筛的影响,并与用单一模板剂CTAB合成的MCM-48介孔分子筛进行了比较.实验研究表明,以混合非离子-阳离子表面活性为模板合成MCM-48介孔分子筛,不仅晶化过程中不易发生转晶,而且大大缩短了晶化时间,减少了模板剂用量,提高了产物的结晶度和稳定性;辅助模板剂TX-100具有生物降解性,可减少对环境的污染,用盐酸来调节晶化后溶液的pH值,可提高分子筛的产率.     

用混合表面活性剂合成MCM-48介孔分子筛

在水热体系中研究了以混合非离子一阳离子表面活性剂为模板剂来合成MCM-48介孔分子筛的方法，考察了模板剂用量、晶化温度、晶化时间以及辅助模板剂TX-100用量等条件对分子筛合成的影响，并与用单一表面活性剂CTAB来合成的MCM-48介孔分子筛进行了比较。结果表明，以混合非离子一阳离子表面活性剂为模板剂来合成MCM-48介孔分子筛不仅晶化过程中不易发生转晶，而且还大大缩短了晶化时间，减少了模板剂用量，提高了产物的结晶度和稳定性。此外，辅助模板剂TX-100具有生物降解性，可减少对环境的污染。用盐酸来调节晶化后溶液的pH值，可提高分子筛的产率。     

聚合物的添加对纯硅MCM-41结构及形貌的影响

以正硅酸乙脂(TEOS)为硅源、十六烷基三甲基溴化铵(CTAB)为表面活性剂、聚乙烯醇(PVA)和聚丙二醇(PPG)为助模板剂,合成MCM-41纯硅介孔分子筛,并运用N2吸附和TEM表征技术探讨其性质.结果表明:PVA加入后产物为正六边形形貌的单分散的纳米MCM-41,加入PPG后则生成较长的棒状MCM-41分子筛.     

磺化MCM-41介孔固体酸的合成、表征及其催化乙酰丙酸乙酯化性能

以硅酸乙酯为硅源、十六烷基溴化铵为模板剂,室温常压下便捷地合成了MCM-41介孔分子筛,进而以硫酸为磺化剂,不同水热条件下制得系列磺化介孔固体酸MCM-41-SO3H.利用TG、XRD、FT-IR、TEM-EDX等手段对所得材料进行了表征.采用碱滴定法测定其酸密度,并且以乙酰丙酸乙酯化反应为探针反应,评价其催化性能.结果表明,尽管水热磺化处理在一定程度上降低了MCM-41的介孔规整性,所制备的MCM-41-SO3H介孔固体酸仍较好地保持了MCM-41的介孔结构;水热时间和温度影响其酸密度,进而影响催化活性,其中磺化温度180℃、磺化时间21h制得的催化剂活性最高,乙酰丙酸转化率达到74.4%,并显示出较好的循环稳定性能.     

模板剂对合成中孔分子筛MCM-48的影响

分别采用十六烷基三甲基溴化铵（CTAB）、十八烷基三甲基溴化铵（STAB）表面活性剂作模板,用曲拉通X-100为辅助模板剂,正硅酸乙脂（TEOS）为硅源,在较短时间内合成了具有立方介孔结构的MCM-48.通过X射线衍射（XRD）,氮气等温吸附-脱附,透射电镜（TEM）等表征手段对3种样品进行了对比分析.讨论了2种不同表面活性剂及其辅助模板剂对介孔分子筛的晶体结构、孔径大小的影响.实验结果表明：MCM-48的孔径随着合成所用的阳离子季铵盐表面活性剂的烷基链长增长而增大,并且加入的高分子辅助模板剂可以增大介孔分子筛的孔径,同时降低了其结构的有序性.     

介孔分子筛MCM-41的合成、表征与催化性能

具有大孔径和大比表面的MCM-41介孔分子筛在工业催化中显示了独特的催化性能,研究它的催化性能具有替代一些大分子反应的均相催化剂的实际应用价值。本文对MCM-41介孔分子筛的合成、改性、表征与催化性能进行了扼要的评述。     

Markedness and its Interpretation in Language Use

Language markedness is a common phenomenon in languages, and is reflected from hearing, vision and sense, i.e. the variation in the three aspects such as phonology, morphology and semantics. This paper focuses on the interpretation of markedness in language use following the three perspectives, i.e. pragmatic interpretation, psychological interpretation and cognitive interpretation, with an aim to define the function of markedness.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

Features of Women's language

Language is a means of verbal communication. People use language to communicate with each other. In the society, no two speakers are exactly alike in the way of speaking. Some differences are due to age, gender, statue and personality. Above all, gender is one of the obvious reasons. The writer of this paper tries to describe the features of women＇s language from these perspectives： pronunciation, intonation, diction, subjects, grammar and discourse. From the discussion of the features of women＇s language, more attention should be paid to language use in social context. What＇s more, the linguistic phenomena in a speaking community can be understood more thoroughly.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

低渗透非均质砂岩油藏启动压力梯度研究

理论推导与室内实验相结合,建立了低渗透非均质砂岩油藏启动压力梯度确定方法。首先借助油藏流场与电场相似的原理,推导了非均质砂岩油藏启动压力梯度计算公式。其次基于稳定流实验方法,建立了非均质砂岩油藏启动压力梯度测试方法。结果表明:低渗透非均质砂岩油藏的启动压力梯度确定遵循两个等效原则。平面非均质油藏的启动压力梯度等于各级渗透率段的启动压力梯度关于长度的加权平均;纵向非均质油藏的启动压力梯度等于各渗透率层的启动压力梯度关于渗透率与渗流面积乘积的加权平均。研究成果可用于有效指导低渗透非均质砂岩油藏的合理井距确定,促进该类油藏的高效开发。     

On Tragic Consciousness In The Works By Ernest Hemingway

As an American modern novelist who were famous in the literary world, Hemingway was not a person who always followed the trend but a sharp observer. At the same time, he was a tragedy maestro, he paid great attention on existence, fate and end-result. The dramatis personae's tragedy of his works was an extreme limit by all means tragedy on the meaning of fearless challenge that failed. The beauty of tragedy was not produced on the destruction of life, but now this kind of value was in the impact activity. They performed for the reader about the tragedy on challenging for the limit and the death.     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to