剪切挤压-轧制复合成形对6016铝合金织构及动态性能的影响

采用X射线衍射、分离式霍普金森压杆等研究剪切挤压-轧制工艺对6016铝合金织构和动态力学性能的影响.结果表明：常规轧制后6016板材具有较强的β取向线轧制织构,而剪切挤压-轧制成形的6016铝合金板材中形成了大量的剪切织构r-Cube{001}<110>及r-Copper{112}<011>,其相较于常规轧制织构有一定弱化.固溶后,2种工艺的板材中都以再结晶织构Cube{001}<100>为主,但剪切挤压-轧制工艺制备的板材中剪切织构的体积分数要比常规轧制板材高60%,这更有利于板材成形.在模拟烤漆工艺后的动态冲击过程中,2种板材均有明显的正应变速率强化效应,而剪切挤压-轧制工艺则能进一步提高6016铝合金板材的应变率敏感性和吸能效果.     

430不锈钢冷轧板高温退火过程中再结晶织构的定量分析

在750、800、825和850℃温度下,利用Gleeble1500热模拟试验机对430不锈钢冷轧薄板的等温退火过程进行了详细的实验研究,分析了退火过程中再结晶织构和组织的变化规律,并对关键织构体积分数的演变进行了定量分析.结果发现:随着退火过程的进行,α取向线上的织构强度逐渐减弱,而γ取向线上的织构强度则略有加强,并保持在较高的值;再结晶过程中,{111}和{112}<110>织构的体积分数逐渐降低,而{100}和随机取向晶粒的体积分数逐渐增加.定量分析表明,退火温度越低,完全再结晶后材料内部关键织构的体积分数越偏离冷轧态.最后,针对{111}、{112}?110>、{100}和随机取向织构的体积分数在再结晶过程中的演变规律,建立了JMAK型再结晶织构演变动力学模型.     

半工艺无取向硅钢加临界变形的织构演变

测定了半工艺无取向电工钢热轧(终轧温度在Ar1以下)到成品各工序的织构,以取向分布函数(ODF)的形式对加临界变形的半工艺无取向硅钢的织构演变作了分析.发现其热轧板表层织构基本是典型的铁素体再结晶{111}组分,心部和1/4厚度处以铁素体剪切织构和轧制变形织构为主.冷轧变形后,心部和表层织构组分比较接近,{111}、{112}和{100}面织构都增加,但{111}组分增加最明显.软化退火后,{001}<110>与{112}<110>组分迅速降低,织构组分以γ纤维织构为主.通过增加临界变形,在最终去应力退火后,{111}不利面织构大量减少,高斯组分增加明显.Taylor因子可以表征不同取向晶粒对变形能的储存能力,从轧制变形时Taylor因子的分布可以解释该实验结果.     

异步轧制无取向硅钢的再结晶织构演变

在无取向硅钢冷轧过程中采用同步轧制和速比为1.06,1.125,1.19的异步轧制,以考察异步轧制对冷轧和再结晶织构的影响.研究发现,异步轧制减弱冷轧织构中{001}～{112}〈110〉组分,增强{111}〈112〉并减弱{111}〈110〉组分.{111}〈112〉和{111}～{225}〈110〉形变晶粒内剪切带处分别形成η(〈001〉∥RD)及偏离其15°的η′(Ψ=75°,θ=0～45°,φ=0°)再结晶晶粒,η′因晶核尺寸优势发展成为主要织构组分.异步轧制下形变织构的变化有利于改善再结晶织构特征及性能,其影响随速比增大而增强.     

不同轧制方式对铌箔微观组织和织构的影响

采用取向分布函数(ODF),并通过光学金相(OM)显微组织观察,研究分析经4种不同轧制方式变形及其在1 050℃退火1h过程中微观组织和织构的演变.研究结果表明:对于顺轧变形方式的铌箔,经1 050℃退火1h后较其他3种轧制方式晶粒细小均匀,晶粒的平均尺寸约为40μm;交叉轧制变形方式能形成较强的{001}＜110＞形变织构,并且经退火后能强化{111}＜uvw＞再结晶织构,有利于提高铌材的深冲性能,同时减少{001}＜100＞立方织构,而其他3种轧制方式对{001}＜l00＞织构具有强化作用;4种不同轧制方式变形不能强化{111}＜110＞形变织构.     

含铌Hi-B钢织构的演变

以两种含Nb量不同的Hi-B钢为研究对象,借助OM、SEM及XRD研究了试验钢在常化、冷轧及脱碳退火过程中织构的演变规律。结果表明,两组试验钢常化板沿板厚方向存在织构差异,表层及次表层主要为{110}112、{112}111及Goss织构组分,中心层以{001}110、{111}112及{112}110织构组分为主,除次表层Goss织构外,低Nb钢中各织构组分含量均高于高Nb钢;冷轧过程中,{112}111和{110}001织构转变为{111}面织构,{112}110织构转向{001}110织构,高Nb钢中各织构组分含量均高于低Nb钢;脱碳退火过程中,两组试验钢中均形成了较强的{111}面织构,高Nb钢中含有更强的{111}面织构和更弱的Goss织构组分,并且Goss晶粒与{111}112晶粒之间的取向差更接近Σ9晶界。     

深冲用冷轧薄钼板晶体空间取向分布的研究

本文利用晶体取向分布函教研究了国产冷轧钼板的直轧和交叉轧制织构。结果表明,直轧钼板的基本织构组分为:{001}〈110〉织构、轧向〈011〉纤维织构和轧面{111}纤维织构;交叉轧制使钼板中{001}〈110〉织构和{111}纤维织构同时明显增加。通过对晶体取向分布特征的全面分析,初步探讨了轧制过程中晶粒转动的规律,为提高钼板深冲性能提供了一定的依据。     

Ta-7.5％W在退火过程中的组织和织构演变

通过金相组织观察、透射电子显微镜(TEM)及显微硬度测试,研究冷轧变形量为95％的Ta-7.5％W合金箔材在1 050,1 200和1 360℃退火时的组织和性能变化,并采用取向密度函数(ODF)分析在此过程中其织构演变规律.对其实验结果进行研究发现:冷轧态Ta-7.5％W合金硬度为HV 300,经1 360℃退火后硬度迅速减小,说明此时合金已发生回复再结晶.轧制后的Ta-7.5％W合金箔材具有各向异性,在轧面∥{111}取向上形成位错胞亚结构,在轧面∥{100}取向上形成了形变带,冷轧态的主要织构为{001}〈110〉,{112} 〈110〉和{110}〈110〉织构;在1 200℃退火时,在轧面∥{111}取向上,再结晶通过亚晶界迁移、亚晶长大形核,而在轧面∥{100}取向上,主要是通过亚晶转动、聚合形核;{001}〈110〉织构增强,{112}〈110〉织构减弱;在1 360℃退火时,{001}〈110〉织构急剧减弱,{111}〈112〉织构增强.     

IF钢生产过程中的织构演变

对IF钢生产过程中热轧、冷轧及退火试样的织构演变进行研究.分别借助EBSD和XRD测定和计算了热轧、退火及冷轧试样的取向分布函数及相关织构组分的体积分数.结果发现,热轧板在变形过程中发生了动态再结晶,晶粒为细小的等轴晶,为后续组织发展提供了基础;热轧后试样中的织构很弱,不会影响冷轧织构组分及含量.冷轧过程是织构形成的主要过程,试样中含有4种主要的织构组分:{001}〈110〉、{111｝〈110〉、{111}〈112〉和{112}〈110〉.退火过程中发生再结晶,4种冷轧织构组分在退火过程中均分别转变为{111｝面织构.     

异步轧制下无取向硅钢的冷轧织构

研究了同步和异步轧制下无取向硅钢的冷轧织构及其沿层厚的分布特征.不同轧制方式下冷轧织构均主要由以{001}〈110〉为强点的α织构和强度相对较弱的γ织构组成,但异步轧制显著影响冷轧织构强度及其沿层厚的分布.异步轧制对表层和中间层织构强度的影响较1/4层大;异步轧制总体上减少α和γ织构,但增加{111}〈112〉组分.这表明冷轧过程引入异步轧制可为无取向硅钢的织构控制与优化开辟新的途径.     

Markedness and its Interpretation in Language Use

Language markedness is a common phenomenon in languages, and is reflected from hearing, vision and sense, i.e. the variation in the three aspects such as phonology, morphology and semantics. This paper focuses on the interpretation of markedness in language use following the three perspectives, i.e. pragmatic interpretation, psychological interpretation and cognitive interpretation, with an aim to define the function of markedness.     

Lower Paleozoic oil relationships within Williston Basin, Canada

The Williston Basin is a significant petroleum province, containing oil production zones that include the Middle Cambrian to Lower Ordovician, Upper Ordovician, Middle Devonian, Upper Devonian and Mississippian and within the Jurassic and Cretaceous. The oils of the Williston Basin exhibit a wide range of geochemical characteristics defined as "oil families", although the geochemical signature of the Cambrian Deadwood Formation and Lower Ordovician Winnipeg reservoired oils does not match any "oil family". Despite their close stratigraphic proximity, it is evident that the oils of the Lower Palaeozoic within the Williston Basin are distinct. This suggests the presence of a new "oil family" within the Williston Basin. Diagnostic geochemical signatures occur in the gasoline range chromatograms, within saturate fraction gas chromatograms and biomarker fingerprints. However, some of the established criteria and cross-plots that are currently used to segregate oils into distinct genetic families within the basin do not always meet with success, particularly when applied to the Lower Palaeozoic oils of the Deadwood and Winnipeg Formation.     

An Analysis of Catherine＇s Character——Wuthering Heights

Wuthering Heights, Emily Bronte＇s only novel, was published in December of 1847 under the pseudonym Ellis Bell. The book did not gain immediate success, but it is now thought one of the finest novels in the English language. Catherine is the key character of this masterpiece, because everybody and everything center on her though she had a short life. We can understand this masterpiece better if we know Catherine well.     

Features of Women's language

Language is a means of verbal communication. People use language to communicate with each other. In the society, no two speakers are exactly alike in the way of speaking. Some differences are due to age, gender, statue and personality. Above all, gender is one of the obvious reasons. The writer of this paper tries to describe the features of women＇s language from these perspectives： pronunciation, intonation, diction, subjects, grammar and discourse. From the discussion of the features of women＇s language, more attention should be paid to language use in social context. What＇s more, the linguistic phenomena in a speaking community can be understood more thoroughly.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

Design and analysis of generic LBS application developing platform

Location based services is promising due to its novel working style and contents.A software platform is proposed to provide application programs of typical location based services and support new applications developing efficiently. The analysis shows that this scheme is easy implemented, low cost and adapt to all kinds of mobile nework system.     

橡胶颗粒沥青混合料低温抗裂性试验研究

以AC-13级配为基础,将橡胶颗粒代替部分集料掺入混合料中,以低温弯曲试验为评价方法对不同橡胶颗粒掺量下沥青混合料的低温抗裂性进行研究,并引入应变能密度值对混合料的低温抗裂性进行综合评价.试验结果表明:橡胶颗粒沥青混合料试件的破坏微应变均超过2 300,满足冬寒区的技术指标;无论是否掺加橡胶颗粒,随着温度的下降,沥青混合料破坏时的最大弯拉强度增大,弯拉应变降低,劲度模量增大;弯曲应变能密度在胶粒掺量为1%左右时具有较大的弯曲应变能密度值,此时橡胶颗粒沥青混合料具有较好的低温抗裂性.     

低渗透非均质砂岩油藏启动压力梯度研究

理论推导与室内实验相结合,建立了低渗透非均质砂岩油藏启动压力梯度确定方法。首先借助油藏流场与电场相似的原理,推导了非均质砂岩油藏启动压力梯度计算公式。其次基于稳定流实验方法,建立了非均质砂岩油藏启动压力梯度测试方法。结果表明:低渗透非均质砂岩油藏的启动压力梯度确定遵循两个等效原则。平面非均质油藏的启动压力梯度等于各级渗透率段的启动压力梯度关于长度的加权平均;纵向非均质油藏的启动压力梯度等于各渗透率层的启动压力梯度关于渗透率与渗流面积乘积的加权平均。研究成果可用于有效指导低渗透非均质砂岩油藏的合理井距确定,促进该类油藏的高效开发。     

Quantitative trait loci （QTLs） for quality traits related to protein and starch in wheat

Quality traits in wheat （Triticum aestirum L.） were studied by quantitative trait locus （QTL） analysis in a recombinant inbred line （RIL） population, a set of 131 lines derived from Chuan 35050 × Shannong 483 cross （ChSh）. Grains from RILs were assayed for 21 quality traits related to protein and starch. A total of 35 putative QTLs for 19 traits with a single QTL explaining 7.99-40.52% of phenotypic variations were detected on 10 chromosomes, 1D, 2A, 2D, 3B, 3D, 5A, 6A, 6B, 6D, and 7B. The additive effects of 30 QTLs were positive, contributed by Chuan 35050, the remaining 5 QTLs were negative with the additive effect contributed by Shannong 483. For protein traits, 15 QTLs were obtained and most of them were located on chromosomes 1 D, 3B and 6D, while 20 QTLs for starch traits were detected and most of them were located on chromosomes 3D, 6B and 7B. Only 7 QTLs for protein and starch traits were co-located in three regions on chromosomes 1D, 2A and 2D. These protein and starch trait QTLs showed a distinct distribution pattern in certain regions and chromosomes. Twenty-two QTLs were clustered in 6 regions of 5 chromosomes. Two QTL clusters for protein traits were located on chromosomes 1D and 3B, respectively, three clusters for starch traits on chromosomes 3D, 6B and 7B, and one cluster including protein and starch traits on chromosome 1D.     

On Tragic Consciousness In The Works By Ernest Hemingway

As an American modern novelist who were famous in the literary world, Hemingway was not a person who always followed the trend but a sharp observer. At the same time, he was a tragedy maestro, he paid great attention on existence, fate and end-result. The dramatis personae's tragedy of his works was an extreme limit by all means tragedy on the meaning of fearless challenge that failed. The beauty of tragedy was not produced on the destruction of life, but now this kind of value was in the impact activity. They performed for the reader about the tragedy on challenging for the limit and the death.