电解质支持型固体氧化物燃料电池的制备及其工作稳定性

利用固相反应法制备固体氧化物燃料电池（SOFC)的复合阳极材料NiO-ScSZ和复合阴极材料（La_0.8Sr_0.2）_0.98MnO₃(LSM), 并对组装的电解质支持型单电池NiO-ScSZ-LSM进行I V性能测试, 其输出电压每0.2 A为0.9 V. 在外加恒定电流密度(0.2 A/cm²)的条件下, 利用电化学测试仪测试该电池的总电压为每1 000 h衰减0.02 V. 电流遮断法解析表明, 该单电池电压衰减主要为阴极过电压所致.     

La0.55Eu0.1Sr0.15Na0.2MnO3的制备及其磁性

采用溶胶\|凝胶方法制备钙钛矿型稀土锰氧化物La_0.55Eu_0.1Sr_0.15Na_0.2MnO₃, 利用X射线衍射(XRD)、 振动样品磁强计(VSM)和磁性测量系统(MPMS)对样品的结构、 居里温度、 磁卡效应和磁电阻效应进行研究. 结果表明, 样品具有单相六角钙钛矿结构, 居里温度为310 K, 磁电阻变化率为11.18％, 最大磁熵变为1.45 J/(kg·K).      

Synthesis and electrochemical properties of LiNi0.8Al0.2−xTixO2 cathode materials by an ultrasonic-assisted co-precipitation method

A new co-precipitation route was proposed to synthesize LiNi_0.8Al_0.2−xTi_xO₂ (x=0.0-0.20) cathode materials for lithium ion batteries, with Ni(NO₃)₂, Al(NO₃)₃, LiOH·H₂O, and TiO₂ as the starting materials. Ultrasonic vibration was used during preparing the precursors, and the precursors were protected by absolute ethanol before calcination in the air. The influences of doped-Ti content, calcination temperature and time, additional Li content, and ultrasonic vibration on the structure and properties of LiNi_0.8Al_0.2−xTi_xO₂ were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), and charge-discharge tests, respectively. The results show that the optimal molar fraction of Ti, calcination temperature and time, and additional molar fraction of Li for LiNi_0.8Al_0.2−xTi_xO₂ cathode materials are 0.1, 700°C, 20 h, and 0.05, respectively. Ti doping facilitates the formation of the α-NaFeO₂ layered structure, and ultrasonic vibration improves the electrochemical performance of LiNi_0.8Al_0.2−xTi_xO₂.     

中温SOFC阴极材料La0.7Sr0.3Co1-xCuxO3-δ的制备及性能

采用固相反应法制备了La_0.7Sr_0.3Co_1-xCu_xO_3-δ系列中温固体氧化物燃料电池（SOFC）阴极材料粉体.对其进行晶体结构表征,高温电导率和热膨胀曲线测试,并选取其中性能较好的样品进行了单电池实验.结果表明,Cu的掺杂降低了（La,Sr）CoO La₃体系阴极材料的热膨胀系数,在x=0.05时电导率略高于未掺Cu的样品.以La_0.7Sr_0.3Co_0.95Cu _0.05O _3-δ为阴极、Ce_0.8Sm_0.2O_1.9为电解质组成的SOFC单电池,在850℃最大短路电流密度达511mA/cm²,最大输出功率密度约为0.106W/cm².     

TiO2复合对La2/3(Ca0.65Ba0.35)1/3MnO3电输运和磁电阻效应的影响

利用甘氨酸-硝酸盐（GNP）法合成了La_2/3(Ca_0.65Ba_0.35)_1/3MnO₃纳米颗粒体系, 与TiO₂复合后, 得到La_2/3(Ca_0.65Ba_0.35)_1/3MnO_3/xTiO₂体系（x=0,0.02,0.035,0.055,0.09,0.17）, 通过X射线衍射、 Raman光谱、 扫描电子显微镜和磁电阻效应测试, 对合成产物的结构及性能进行表征. 结果表明, 样品均成立方对称结构, 复合使低场磁电阻增强, 电阻率增大.     

Structure and properties of NASICON synthesized by two different zirconium salts

ZrOCl₂·8H₂O and ZrO(NO₃)₂·2H₂O were used respectively to synthesize a NASICON solid electrolyte by a sol-gel method. The structure and properties of two samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and electrochemical impedance spectroscopy (EIS). The crystal structure was investigated by the Rietveld refinement. It is found that both the samples contain a monoclinic C2/c phase as the main conductive phase with the lattice parameters of a=1.56312 nm, b=0.90784 nm and c=0.92203 nm, though a small amount of rhombohedral phase is also detected in the final product. The sample synthesized by ZrO(NO₃)2·2H₂O contains more monoclinic phase (89.48wt%) than that synthesized by ZrOCl₂·8H₂O (74.91wt%). As expected, the ionic conductivity of the latter is higher than that of the former; however, the activation energy of the latter (0.37 eV) is slightly higher than that of the former (0.35 eV).     

纳米CuO/CeO2制备、表征及对甲烷燃烧催化活性

文中用柠檬酸络合法制备了纳米稀土复合氧化物Cu_xCeO_δ，以透视电子显微镜（TEM）、热重-差热分析（TG-DTA）、Brunauer Emmett Teller（BET）比表面和X射线衍射分析（XRD）、粒度二次分布仪等方法表征了复合物粉末的粒径、热稳定性、比表面、晶相和二次粒度分布，以常压微型固定床反应器考察了该复合物催化剂对甲烷燃烧的催化活性。研究了复合物中CuO含量和焙烧温度对催化活性的影响，并初步探讨燃烧反应的机理。     

基于Li2MnO3的富锂类高比容量锂离子电池正极材料的研究进展

综述了近几年来基于Li2MnO3的高比容量二元和三元富锂类锂离子电池正极材料的研究进展.重点讨论了富锂材料zLi2MnO3.(1-z)LiMO2(0相似文献   

(La0.9Dy0.1)2/3Ba1/3Mn1-xAlxO3(x=0,0.05)氧化物的结构与磁性

【目的】为改善(La_(0.9)Dy_(0.1))_(2/3)Ba_(1/3)Mn_(1-x)Al_xO_3的磁热性能,研究掺杂Al对其晶体结构、居里温度、相变类型以及磁热性能的影响。【方法】采用固相反应法制备锰氧化物(La_(0.9)Dy_(0.1))_(2/3)Ba_(1/3)Mn_(1-x)Al_xO_3(x=0,0.05)样品,利用X射线衍射法分析样品的结构,用振动样品磁强计测量样品的磁性。【结果】所制备样品均为单相钙钛矿结构,属于菱方晶系,空间群为R-3c(No.167)。掺杂Al使样品居里温度由无掺杂的274K降低到248K,在外加磁场变化为20kOe时最大磁熵变由2.16J/(kg·K)降低到1.85J/(kg·K)。样品的铁磁-顺磁相变属于二级相变。采用双交换作用机制解释了居里温度和磁化强度的变化。【结论】非磁性元素Al替代Mn不改变其晶体结构,稍微降低了锰氧化物的磁热性能。     

Structural, magnetic and transport properties of Sc-doped La0.7Sr0.3MnO3

The Sc-doped La_0.7Sr_0.3MnO₃ polycrystallines were prepared by thermal decomposition of complexes of metal ions with ethylenediamine-tetraacetic acid (EDTA). The dependence of structural, magnetic and transport properties on Sc doping was investigated. Moderate Sc doping level results in a sharp drop in Curie temperature, an increase in resistance and enhancement of magnetoresistance effect. At temperatures aboveT _MI,R(T) can be described asR(T) = R ₀exp(T ₀/T)^1/4, which indicates that conduction takes place by hopping between the localized states. The experimental data reveal that the change in magnetoresistance property is related to the structure.     

Highly effective La-deficient La_(1-x)Ce_xMnO_3 mixed oxides for the complete oxidation of methane

La-deficient La_(1-x)Ce_xMnO_3 mixed oxides, obtained by selective dissolution in 1 M nitric acid, were employed in methane complete oxidation. The majority of the La cations in these perovskites were removed, resulting in increased specific surface areas, better reducibility and greater activity. Incorporation of a small amount of Ce stabilized the structure and a perovskite phase persisted in La-deficient La_(1-x)Ce_xMnO_3 mixed oxides after 12 h of acid dissolution. La_(0.95)Ce_(0.05)MnO_3 after the acid treatment exhibited satisfactory catalytic activity, with T50 and T90 values of 365 and 459℃, respectively, which was even comparable to that previously reported 1% Pd/Al_2O_3 catalysts. And it showed excellent long-term activity even in the presence of CO_2 and H_2O.     

Systematically controlled synthesis of rGO/nano-MnO_x materials for supercapacitors

The effects of hydrothermal production conditions on crystal forms,morphology and electrochemical performance of in situ reduced graphene oxide/manganese oxides(r GO/Mn O_x)hybrid electrode materials were studied.The XRD/SEM results show that the ratio of precursors,reaction temperature and type of solvent significantly affected the crystal form obtained and nano-structure of MnO_x.Varied precursor ratios of KMnO_4:GO(5:1,7:1,9:1 and 11:1)yielded the hybrids of rGO/Mn_7O_(13)5H_2O,rGO/β-MnO_2,rGO/Mn_(98)O_2,and rGO/K_(0.27)MnO_2(H_2O)_(0.54),respectively,having corresponding nano structures of nano-sheets composed petal-like shape,petal-like shape based nano-wire clusters,petal-like shape with backwardly arched top and bigger mesoporous petal-like nano structures.Hybrid prepared precursor with the ratio of 5:1 exhibited the highest specific capacitance of 320 F/g at 0.2 A/g and the smallest diffusion impedance.However,hybrid prepared precursor with the ratio of 7:1 presented the lowest electron transfer impedance.Varying hydrothermal treatment temperatures(140,160 and 200℃)yielded hybrids:rGO/MnO(OH),rGO/Mn_(0.91)O_(1,82)(H_2O)_(0.18),and rGO/Mn_7O_(13)5H_2O,respectively.The nano structures of the hybrids were nano-sheets having petal-like mesoporous structure,but having larger dimensions as temperature increase.The hybrid prepared at 160℃ showed the highest specific capacitance of 214 F/g at a current density of 0.2 A/g and the lowest solution resistance of1.61Ω,whiles,the hybrid prepared at 140℃ inferred the best cyclic reversibility.     

新的糖/茂钛化合物的合成及其生物活性研究

用4种含糖基团取代二氯化二茂钛中的氯,合成了4种新的糖/茂钛化合物:乳糖酸根一氯化二茂钛C12H21O12.C10H10TiCl,质酸根一氯化二茂钛C14H20NO11.C10H10TiCl.8H2O,乳糖酸根一质酸根二茂钛C12H21O12.C14H20NO11.C10H10Ti.26H2O和乳糖酸酰胺乙酸根一氯化二茂钛C14H24NO13C10H10TiCl.化合物都经过红外光谱、核磁共振、元素分析表征,并用MTT法研究了化合物对人体子宫颈癌细胞增殖体外实验.研究表明新合成的化合物都溶于水,对癌细胞有很好的抑制作用,糖结构的引入有明显的肝靶向效应.     

化学强化剂提高生物膜填料塔烟气同时脱硫脱氮性能的实验研究

对采用外加化学强化剂提高生物膜填料塔烟气同时脱硫脱氮的性能进行实验研究.结果表明,当按最优化学强化剂添加量添加硝酸镧0.25+硝酸铈0.25 mg/L、硫酸镁0.5 g/L、乙酸钠0.3 g/L时,生物膜填料塔的NOx净化效率可达61.78%,脱硫率为100%.进一步的长时间连续运行实验结果表明,在对SO2的净化效率达到100%的同时,按添加最优化学强化剂条件实验操作的生物膜填料塔的NOx净化效率明显高于对比空白实验的NOx净化效率,其NOx净化效率的平均值提高了14.78%.实验为研究形成提高生物法烟气同时脱硫脱氮性能(尤其对提高烟气脱氮效率)的新型化学强化技术方法奠定了基础.     

氧化吸收法同步脱除燃烧烟气中SO2，NOx和CO2的化学热力学及其评价

湿化学法同步脱除烟气中气态污染物是燃烧源大气污染控制的重要方法之一,为探究采用不同氧化吸收策略同时脱除燃烧烟气中SO_2,NO_x和CO_2的可行性,基于化学热力学原理,分析了9种联合氧化吸收策略的性能,具体的氧化吸收策略包括:H_2O_2-NH_3·H_2O,H_2O_2-MDEA,H_2O_2-NaOH,O3-NH_3·H_2O,O3-MDEA,O3-NaOH,NaClO_2-NH_3·H_2O,NaClO_2-MDEA和NaClO_2-NaOH,并提出新的动态加权法对其性能进行综合评价。结果表明:上述所有策略均具有SO_2,NO_x和CO_2捕获的可行性。O3-NaOH,NaClO_2-MDEA和NaOH做吸收剂的氧化吸收溶液分别对单一脱硫、脱硝和脱碳效果最好。当综合考虑同步脱除SO_2,NO_x和CO_2时,NaClO_2-MDEA优于其他策略,其结果可为燃烧烟气中的气体污染物的联合脱除提供参考。     

PMMA胶体晶体模板法制备三维有序大孔TiO_2/SiO_2

以密堆积的聚甲基丙烯酸甲酯微球为模板,用一种预制备的水分散性TiO2纳米晶、正硅酸乙酯、水和乙醇制成混合溶胶,通过一种浸渍-抽滤方法,将混合溶胶充填于模板微球之间的间隙,原位形成凝胶,最终通过焙烧除去模板微球得到三维有序大孔TiO2/SiO2复合氧化物。样品的SEM结果表明,所形成的球形孔大小均匀,孔径在195$5nm,并以六方和四方的有序排列在三维方向上延伸。样品的TEM和XRD表明大孔的孔壁中含有6～7nm的锐钛矿型TiO2纳米晶。     

Investigation on the coordinate structures of the rare earth metal complexes with edta and cydta ligands

0　IntroductionThegreatattentionhasbeenpaidtorareearthorradioactiverareearthmetalcomplexesfortheirvariousbiologicactivi ties[1 3] .Forexamples,theradioactiverareearthmetal1 53SmⅢ com plexeswerewidelyusedfortumourtherapyofbrain ,liver,lung ,heartandbonetissues[4 5] ;forrareearthmetalEuⅢandTbⅢemitinguniquefluorescence ,theircompoundswereappliedfordiagnosesofvariousdiseases[6 ,7] ;forrareearthmetalGdⅢcontainingthemosthigh spinsingleelectrons,itscomplexeswereusuallyusedforcontrastagentsofmag…     

Li1+xAlxTi2-x(PO4)3(x=0~0.4)溶胶-凝胶法合成及其性质

以乙酸锂、硝酸铝、钛酸丁酯、磷酸二氢铵为原料,利用溶胶-凝胶法合成锂离子Li_1+xAl_xTi_2-x(PO₄)₃(x=0~0.4)固体电解质体系,检测结果表明：Li_1+xAl_xTi_2-x(PO₄)₃体系具有较好的结晶性,合成的粉末与烧结片之间的结晶性与结构差异不大;当Al³⁺掺杂量逐步增加时,离子电导率逐渐增大,并在x=0.3时达到最大值,但掺杂量进一步增加时,离子电导率迅速下降;活化能的变化趋势与离子电导率相反.     

Electrodeposition and characterization of thermoelectric Bi<Subscript>2</Subscript>Se<Subscript>3</Subscript> thin films

Bi₂Se₃ thin films were electrochemically deposited on Ti and indium tin oxide-coated glass substrates, respectively, at room temperature, using Bi(NO₃)₃·5H₂O and SeO₂ as starting materials in diluted HNO₃ solution. A conventional three-electrode cell was used with a platinum sheet as a counter electrode, and a saturated calomel electrode was used as a reference electrode. The films were annealed in argon atmosphere. The influence of cold isostatic pressing before annealing on the microstructure and thermoelectric properties of the films was investigated. X-ray diffraction analysis indicates that the film grown on the indium tin oxide-coated glass substrate is pure rhombohedral Bi₂Se₃, and the film grown on the Ti substrate consists of both rhombohedral and orthorhombic Bi₂Se₃.     

Preparation and characterization of three-dimensionally ordered macroporous polystyrene <Emphasis Type="Italic">via</Emphasis> atom-transfer radical polymerization

Three-dimensionally ordered macroporous polystyrene （3DOM PS） with pore size of 350 nm was fab- ricated using Cp2Co/Ethyl 2-bromoisobutyrate （EBiB） catalytic system by ATRP. The resulting polymers were detected by FT-IR, 1H-NMR, SEM, and GPC. The microstructure of 3DOM PS was confirmed by FT-IR and 1H-NMR. SEM micrographs show that both silica spheres within the templates and pores in the 3DOM polystyrene are arranged in highly ordered fashion, and the shrinkage of the pores in the 3DOM PS is 24%. GPC curves show that the 3DOM PS possesses slightly lower Mn and narrow MWD compared with bulk one. This result indicats that living polymerization is different from non-living polymerizationin in the confined space.