| 硬岩掘进机截齿与齿座的有限元分析 |
| |
| 引用本文： | 李晓豁,姜丽丽.硬岩掘进机截齿与齿座的有限元分析[J].黑龙江科技学院学报,2009,19(3):222-224. |
| |
| 作者姓名： | 李晓豁 姜丽丽 |
| |
| 作者单位： | 辽宁工程技术大学,机械工程学院,辽宁,阜新,123000 |
| |
| 基金项目： | 国家自然科学基金资助项目，国家煤矿安全监察局安全生产科技发展指导性计划项目，辽宁省教育厅创新团队项目，辽宁省大型工矿装备实验研究中心(辽宁省高校重点实验室)开放基金资助项目 |
| |
| 摘 要： | 为了明确硬岩掘进机截齿与齿座的受力和应力分布情况,确定其损坏原因,通过MATLAB软件模拟单个截齿载荷,利用ANSYS对单个截齿及齿座进行有限元分析。研究表明：单个截齿的受力随切屑厚度的变化而变化,截齿位置角在π/2处截齿所受的各向载荷最大。截齿的最大变形发生在刀头部位,齿座的最大变形发生在齿座前部。根据研究结果,有针对性地采取措施,可进一步减少截齿及齿座损坏,延长其使用寿命。
|
| 关 键 词： | 掘进机 截齿 齿座 ANSYS 应力 |
Finite element analysis of pick and holder on hard rock roadheader |
| |
| LI Xiaohuo,JIANG Lili.Finite element analysis of pick and holder on hard rock roadheader[J].Journal of Heilongjiang Institute of Science and Technology,2009,19(3):222-224. |
| |
| Authors: | LI Xiaohuo JIANG Lili |
| |
| Institution: | College of Mechanical Engineering;Liaoning Technology University;Fuxin 123000;China |
| |
| Abstract: | This paper is an effort to investigate forced situation and its holder on a hard roadheader and determine the causes of their damage stress distribution of a pick and . The paper introduces the simu- lation of a single pick load by means of MATLAB and finite element analysis of the pick and its holder by using of ANSYS. The results show that forces on a single pick change with the thickness of chip, and all forces reache maximum when the position angle reaches π/2. The largest pick deformation occurs in parts of tool bit and the biggest tooth holder deformation occurs in the front of holder. The results show that the proper measures can reduces the damage of pick and holder and prolongs its life. |
| |
| Keywords: | ANSYS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
