| 柱面驱动新型行波超声电机的研究 |
| |
| 引用本文： | 李有光,陈在礼,陈维山,谢涛,刘军考.柱面驱动新型行波超声电机的研究[J].西安交通大学学报,2008,42(11). |
| |
| 作者姓名： | 李有光 陈在礼 陈维山 谢涛 刘军考 |
| |
| 作者单位： | 哈尔滨工业大学机电学院,150001,哈尔滨 |
| |
| 摘 要： | 为增加定转子接触面积，使接触应力分布均匀，从而减少接触区磨损，提高电机的机械性能，利用壳体的非轴对称振动模式，成功地研制出一种柱面驱动新型行波超声电机．在设计的电机结构中，给出了压电陶瓷的极化、分布和驱动方式，运用有限元分析软件ANSYS9．0对定子进行了模态和谐响应分析，并运用振动理论推导了定子齿上的椭圆运动轨迹方程．实验表明，该电机在驱动电压有效值为150V、驱动频率为16．1kHz时，堵转转矩为1．8N·m，最大空载转速为64r／min，说明电机的连续运转性能良好，能够保证定转子之间的良好接触，使电机平稳转动，从而提高了电机的机械输出性能．
|
| 关 键 词： | 超声电机 行波 压电陶瓷 柱面驱动 |
Novel Traveling Wave Ultrasonic Motor |
| |
| LI Youguang,CHEN Zaili,CHEN Weishan,XIE Tao,LIU Junkao.Novel Traveling Wave Ultrasonic Motor[J].Journal of Xi'an Jiaotong University,2008,42(11). |
| |
| Authors: | LI Youguang CHEN Zaili CHEN Weishan XIE Tao LIU Junkao |
| |
| Institution: | LI Youguang,CHEN Zaili,CHEN Weishan,XIE Tao,LIU Junkao (Department of Mechatronics Engineering,Harbin Institute of Technology,Harbin 150001,China) |
| |
| Abstract: | To increase the contact area and obtain more uniform contact stress distribution within contact surface for reducing wear,a non-axisymmetric vibration model of thin shell is adopted to develop a novel cylinder driving ultrasonic motor,and the structure of the novel motor was designed following the driving mechanism of piezoelectric ceramic.The modal and harmonic response analysis was performed by ANSYS 9.0,and then the elliptic motion locus of the stator was plotted and discussed.Under 150 V driving voltage... |
| |
| Keywords: | ultrasonic motor traveling wave piezoelectric ceramic cylinder driving |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
