首页 | 本学科首页   官方微博 | 高级检索  
     检索      

碳、锰含量对低碳(锰)钢过冷奥氏体形变过程中铁素体形核率的影响
引用本文:周荣锋,杨王玥,孙祖庆,何建平.碳、锰含量对低碳(锰)钢过冷奥氏体形变过程中铁素体形核率的影响[J].北京科技大学学报,2005,27(1):35-39.
作者姓名:周荣锋  杨王玥  孙祖庆  何建平
作者单位:1. 北京科技大学材料科学与工程学院,北京,100083;昆明理工大学机电工程学院,昆明,650093
2. 北京科技大学材料科学与工程学院,北京,100083
3. 北京科技大学新金属材料国家重点实验室,北京,100083
基金项目:国家重点基础研究发展计划(973计划) , 国家高技术研究发展计划(863计划)
摘    要:研究了碳、锰含量对低碳(锰)钢形变强化铁素体晶粒数目变化的影响.结果表明,形变使低碳(锰)钢过冷奥氏体内部形核位置增加,铁素体形核率显著提高,晶粒大大细化.碳、锰含量提高有利于钢中过冷奥氏体累积变形的增加,形变强化相变晶粒细化能力增强,而碳的促进作用尤为显著.

关 键 词:低碳(锰)钢  形变强化相变  形核率  晶粒细化  锰含量  低碳  过冷奥氏体  形变过程  铁素体  形核率  影响  carbon  deformation  during  austenite  nucleation  rate  Ferrite  contents  different  作用  增强  能力  晶粒细化  形变强化相变
修稿时间:2004年2月26日

Ferrite nucleation rate in undercooled austenite during deformation in low carbon (Mn) steels with different C and Mn contents
ZHOU Rongfeng,YANG Wangyue,SUN Zuqing,He jianping.Ferrite nucleation rate in undercooled austenite during deformation in low carbon (Mn) steels with different C and Mn contents[J].Journal of University of Science and Technology Beijing,2005,27(1):35-39.
Authors:ZHOU Rongfeng  YANG Wangyue  SUN Zuqing  He jianping
Abstract:The effect of C and Mn contents on ferrite nucleation rate during Deformation-Enhanced Ferrite Transformation (DEFT) in low carbon (Mn) steels was investigated. The results show that the deformation causes such a higher defect density in austentie grains, which leads to extra sites for nucleation both at the austenite boundaries and intragranular, that ferrite grains are refined dramatically. The addition of C or Mn is favored to strain cumulated in the austenite, which also increases the nucleation sites, resulting in more pronounced ferrite grains refined. The promotive ability of C to refine ferrite grains is, however, much greater than that of Mn.
Keywords:low carbon (Mn) steel  DEFT  nucleation rate  grain refinement
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号